gh-149202: Fix frame pointer unwinding on ppc64le and armv7/clang

Doc/howto/perf_profiling.rst

@@ -219,7 +219,9 @@ How to obtain the best results
 
 For best results, keep frame pointers enabled. On supported GCC-compatible
 toolchains, CPython builds itself with ``-fno-omit-frame-pointer`` and, when
-available, ``-mno-omit-leaf-frame-pointer`` by default. These flags allow
+available, ``-mno-omit-leaf-frame-pointer`` by default. On 32-bit ARM,
+CPython also adds ``-marm`` when supported. On s390 platforms, CPython also
+adds ``-mbackchain`` when supported. These flags allow
 profilers to unwind using only the frame pointer and not on DWARF debug
 information. This is because as the code that is interposed to allow ``perf``
 support is dynamically generated it doesn't have any DWARF debugging information

Doc/using/configure.rst

@@ -784,9 +784,11 @@ also be used to improve performance.
 
    Disable frame pointers, which are enabled by default (see :pep:`831`).
 
-   By default, the build appends ``-fno-omit-frame-pointer`` (and
-   ``-mno-omit-leaf-frame-pointer`` when the compiler supports it) to
-   ``BASECFLAGS`` so profilers, debuggers, and system tracing tools
+   By default, the build appends ``-fno-omit-frame-pointer``,
+   ``-mno-omit-leaf-frame-pointer`` when the compiler supports it,
+   ``-marm`` on 32-bit ARM when supported, and ``-mbackchain`` on s390
+   platforms when supported, to ``BASECFLAGS`` so
+   profilers, debuggers, and system tracing tools
    (``perf``, ``eBPF``, ``dtrace``, ``gdb``) can walk the C call stack
    without DWARF metadata. The flags propagate to third-party C
    extensions through :mod:`sysconfig`. On compilers that do not

Doc/whatsnew/3.15.rst

@@ -2486,6 +2486,17 @@ Build changes
   and :option:`-X dev <-X>` is passed to the Python or Python is built in :ref:`debug mode <debug-build>`.
   (Contributed by Donghee Na in :gh:`141770`.)
 
+.. _whatsnew315-frame-pointers:
+
+* CPython is now built with frame pointers enabled by default
+  (:pep:`831`). Pass :option:`--without-frame-pointers` to opt out.
+  Authors of C extensions and native libraries built with custom build
+  systems should add ``-fno-omit-frame-pointer`` and
+  ``-mno-omit-leaf-frame-pointer`` to their own ``CFLAGS``,
+  ``-marm`` on 32-bit ARM, and ``-mbackchain`` on s390 platforms,
+  to keep the unwind chain intact.
+  (Contributed by Pablo Galindo Salgado and Savannah Ostrowski in :gh:`149201`.)
+
 .. _whatsnew315-windows-tail-calling-interpreter:
 
 * 64-bit builds using Visual Studio 2026 (MSVC 18) may now use the new

Lib/test/test_frame_pointer_unwind.py

@@ -21,6 +21,16 @@
 
 
 def _frame_pointers_expected(machine):
+    _Py_WITH_FRAME_POINTERS = getattr(
+        _testinternalcapi,
+        "_Py_WITH_FRAME_POINTERS",
+        -1,
+    )
+    if _Py_WITH_FRAME_POINTERS > 0:
+        return True
+    if _Py_WITH_FRAME_POINTERS == 0:
+        return False
+
     cflags = " ".join(
         value for value in (
             sysconfig.get_config_var("PY_CORE_CFLAGS"),

Misc/NEWS.d/next/Core_and_Builtins/2026-04-05-16-10-00.gh-issue-149202.W8sQeR.rst

@@ -1,4 +1,5 @@
 Enable frame pointers by default for GCC-compatible CPython builds, including
-``-mno-omit-leaf-frame-pointer`` when the compiler supports it, so profilers
-and debuggers can unwind native interpreter frames more reliably. Users can pass
+``-mno-omit-leaf-frame-pointer``, ``-marm`` on 32-bit ARM, and ``-mbackchain``
+on s390 platforms when the compiler supports them, so profilers and debuggers
+can unwind native interpreter frames more reliably. Users can pass
 ``--without-frame-pointers`` to opt out.

Modules/_testinternalcapi.c

@@ -63,6 +63,40 @@
 static const uintptr_t min_frame_pointer_addr = 0x1000;
 #define MAX_UNWIND_FRAMES 200
 
+#ifdef __s390x__
+// Linux's s390 "Stack Frame Layout" table documents that z/Architecture
+// backchain frames start with the backchain at offset 0 and store "saved r14
+// of caller function" at offset 112.  The same document's register table
+// identifies r14 as the return-address register, so this backchain unwinder
+// reads the return address from fp + 112.
+// https://www.kernel.org/doc/html/v5.3/s390/debugging390.html#stack-frame-layout
+//
+// This is only for Linux s390x backchain frames.  The s390x ELF ABI does not
+// generally mandate where RA and FP are saved, or whether they are saved at all.
+// https://sourceware.org/binutils/docs/sframe-spec.html#s390x
+#  define S390X_FRAME_RETURN_ADDRESS_OFFSET 112
+#endif
+
+// The generic manual unwinder treats the frame pointer as a two-word record:
+// fp[0] is the previous frame pointer and fp[1] is the return address.  That is
+// not true for every architecture, even with frame pointers enabled, so these
+// offsets describe the actual slots used by each supported frame layout.
+#if defined(__arm__) && !defined(__thumb__) && !defined(__clang__)
+// GCC ARM mode keeps the caller's fp one word below fp and the saved LR at
+// fp[0], so the return address is not in the generic fp[1] slot.
+#  define FRAME_POINTER_NEXT_OFFSET (-1)
+#  define FRAME_POINTER_RETURN_OFFSET 0
+#elif defined(__s390x__)
+// s390x backchain frames keep the previous frame pointer at fp[0], but save the
+// return-address register in the ABI register save area rather than fp[1].
+#  define FRAME_POINTER_NEXT_OFFSET 0
+#  define FRAME_POINTER_RETURN_OFFSET \
+    (S390X_FRAME_RETURN_ADDRESS_OFFSET / (Py_ssize_t)sizeof(uintptr_t))
+#else
+#  define FRAME_POINTER_NEXT_OFFSET 0
+#  define FRAME_POINTER_RETURN_OFFSET 1
+#endif
+
 
 static PyObject *
 _get_current_module(void)
@@ -329,15 +363,96 @@ get_jit_backend(PyObject *self, PyObject *Py_UNUSED(args))
 #endif
 }
 
+static int
+stack_address_is_valid(uintptr_t addr, uintptr_t stack_min, uintptr_t stack_max)
+{
+    if (addr < min_frame_pointer_addr) {
+        return 0;
+    }
+    if (stack_min != 0 && (addr < stack_min || addr >= stack_max)) {
+        return 0;
+    }
+    return 1;
+}
+
+static int
+frame_pointer_slot_is_valid(uintptr_t *frame_pointer, Py_ssize_t offset,
+                            uintptr_t stack_min, uintptr_t stack_max)
+{
+    uintptr_t fp_addr = (uintptr_t)frame_pointer;
+    uintptr_t slot_addr;
+    uintptr_t delta = (uintptr_t)Py_ABS(offset) * sizeof(uintptr_t);
+    if (offset < 0) {
+        if (fp_addr < delta) {
+            return 0;
+        }
+        slot_addr = fp_addr - delta;
+    }
+    else {
+        if (fp_addr > UINTPTR_MAX - delta) {
+            return 0;
+        }
+        slot_addr = fp_addr + delta;
+    }
+    if (!stack_address_is_valid(slot_addr, stack_min, stack_max)) {
+        return 0;
+    }
+    if (stack_max != 0) {
+        if (slot_addr > UINTPTR_MAX - sizeof(uintptr_t)) {
+            return 0;
+        }
+        if (slot_addr + sizeof(uintptr_t) > stack_max) {
+            return 0;
+        }
+    }
+    return 1;
+}
+
+static int
+next_frame_pointer_is_valid(uintptr_t *frame_pointer, uintptr_t *next_fp,
+                            uintptr_t stack_min, uintptr_t stack_max)
+{
+    uintptr_t fp_addr = (uintptr_t)frame_pointer;
+    uintptr_t next_addr = (uintptr_t)next_fp;
+    if (!stack_address_is_valid(next_addr, stack_min, stack_max)) {
+        return 0;
+    }
+    if ((next_addr % sizeof(uintptr_t)) != 0) {
+        return 0;
+    }
+#if _Py_STACK_GROWS_DOWN
+    return next_addr > fp_addr;
+#else
+    return next_addr < fp_addr;
+#endif
+}
+
 static PyObject *
 manual_unwind_from_fp(uintptr_t *frame_pointer)
 {
-    int stack_grows_down = _Py_STACK_GROWS_DOWN;
+    uintptr_t stack_min = 0;
+    uintptr_t stack_max = 0;
+
+#ifdef __s390x__
+    Py_BUILD_ASSERT(S390X_FRAME_RETURN_ADDRESS_OFFSET % sizeof(uintptr_t) == 0);
+#endif
 
     if (frame_pointer == NULL) {
         return PyList_New(0);
     }
 
+    PyThreadState *tstate = _PyThreadState_GET();
+    if (tstate != NULL) {
+        _PyThreadStateImpl *tstate_impl = (_PyThreadStateImpl *)tstate;
+#if _Py_STACK_GROWS_DOWN
+        stack_min = tstate_impl->c_stack_hard_limit;
+        stack_max = tstate_impl->c_stack_top;
+#else
+        stack_min = tstate_impl->c_stack_top;
+        stack_max = tstate_impl->c_stack_hard_limit;
+#endif
+    }
+
     PyObject *result = PyList_New(0);
     if (result == NULL) {
         return NULL;
@@ -357,7 +472,21 @@ manual_unwind_from_fp(uintptr_t *frame_pointer)
                 MAX_UNWIND_FRAMES);
             return NULL;
         }
-        uintptr_t return_addr = frame_pointer[1];
+        if (!stack_address_is_valid(fp_addr, stack_min, stack_max)) {
+            break;
+        }
+        if (!frame_pointer_slot_is_valid(frame_pointer,
+                                         FRAME_POINTER_NEXT_OFFSET,
+                                         stack_min, stack_max)) {
+            break;
+        }
+        if (!frame_pointer_slot_is_valid(frame_pointer,
+                                         FRAME_POINTER_RETURN_OFFSET,
+                                         stack_min, stack_max)) {
+            break;
+        }
+        uintptr_t *next_fp = (uintptr_t *)frame_pointer[FRAME_POINTER_NEXT_OFFSET];
+        uintptr_t return_addr = frame_pointer[FRAME_POINTER_RETURN_OFFSET];
 
         PyObject *addr_obj = PyLong_FromUnsignedLongLong(return_addr);
         if (addr_obj == NULL) {
@@ -372,22 +501,10 @@ manual_unwind_from_fp(uintptr_t *frame_pointer)
         Py_DECREF(addr_obj);
         depth++;
 
-        uintptr_t *next_fp = (uintptr_t *)frame_pointer[0];
-        // Stop if the frame pointer is extremely low.
-        if ((uintptr_t)next_fp < min_frame_pointer_addr) {
+        if (!next_frame_pointer_is_valid(frame_pointer, next_fp,
+                                         stack_min, stack_max)) {
             break;
         }
-        uintptr_t next_addr = (uintptr_t)next_fp;
-        if (stack_grows_down) {
-            if (next_addr <= fp_addr) {
-                break;
-            }
-        }
-        else {
-            if (next_addr >= fp_addr) {
-                break;
-            }
-        }
         frame_pointer = next_fp;
     }
 
@@ -3170,6 +3287,12 @@ module_exec(PyObject *module)
         return 1;
     }
 
+#ifdef _Py_WITH_FRAME_POINTERS
+    if (PyModule_AddIntMacro(module, _Py_WITH_FRAME_POINTERS) < 0) {
+        return 1;
+    }
+#endif
+
     return 0;
 }