spot_teleop

Boston Dynamics Spot SDK 5.0 | Meta Quest 3 / SpaceMouse / Keyboard

A Python package for teleoperating Boston Dynamics Spot+Arm using Meta Quest 3, SpaceMouse, or keyboard, and recording demonstrations for action policy training.

---

Demonstration Showcase

These human teleoperation demonstrations showcase diverse manipulation and mobility tasks successfully recorded using this framework:

Push, Pick & Place	Sweep Clean	Writing "A"

---

Key Features

Capability	Details
Multi-input teleoperation	Meta Quest 3 hand tracking, 3Dconnexion SpaceMouse, or keyboard -- choose via --teleop-type.
Full-body control	Drive base with joystick/keys, servo arm & gripper with 6-DoF input at 30 Hz.
Anchor-and-delta control	Hold grip to anchor pose; move hand and end-effector follows.
Demo recording	Record RGB+depth images, joint states, EE poses, body velocity into .npz / .h5 for policy training.
Safe start-up / shutdown	Auto-acquires lease, clears Keepalive & Estop, undocks, stands, and power-offs cleanly.
No ROS, no Unity	Pure Python on top of official bosdyn-client==5.0.0.
Quest 3 tracking pipeline	Uses OculusReader for sub-10 ms pose streaming.

---

Controller Key Map

ToDo

---

Prerequisites

Component	Tested version
Python	>= 3.8 (conda optional)
Spot SDK wheels	bosdyn-client==5.0.0 bosdyn-mission==5.0.0 bosdyn-choreography-client==5.0.0 bosdyn-orbit==5.0.0
Meta Quest 3	v66 firmware, Developer Mode ON (only for meta teleop)
SpaceMouse	3Dconnexion SpaceMouse (only for spacemouse teleop)
Network	Robot <-> PC <-> Quest on same low-latency subnet (<= 2 ms)

Safety – Keep the OEM E-Stop within reach. Never run tele-op unattended.

---

Installation

Option A -- Install as a package (recommended)

# 1. conda env (optional)
conda create -n spot python=3.10 -y
conda activate spot

# 2. clone
git clone https://github.com/mnakash/spot_teleop.git
cd spot_teleop

# 3. system dependency
sudo apt update && sudo apt install mpg123 android-tools-adb

# 4. install the package
pip install .

# with optional extras (spacemouse, realsense, viz):
pip install ".[all]"

Option B -- Run without installing

# 1. conda env (optional)
conda create -n spot python=3.10 -y
conda activate spot

# 2. clone
git clone https://github.com/mnakash/spot_teleop.git
cd spot_teleop

# 3. system dependency
sudo apt update && sudo apt install mpg123 android-tools-adb

# 4. install dependencies only
pip install -r requirements.txt

No pip install . needed -- the scripts resolve the spot_teleop package from the local directory.

---

Setup Environment Variables

Open your .bashrc file by nano ~/.bashrc and add:

# Spot Teleop environment variables
export SPOT_ROBOT_IP=<robot_ip>
export BOSDYN_CLIENT_USERNAME=<username>
export BOSDYN_CLIENT_PASSWORD=<password>

Apply changes:

source ~/.bashrc

Verify:

echo $SPOT_ROBOT_IP
echo $BOSDYN_CLIENT_USERNAME
echo $BOSDYN_CLIENT_PASSWORD

---

Setup Meta Quest Controller

Follow the guidelines in the OculusReader repo for setting up Meta Quest Controller over WiFi or USB.

---

How to Run

# Meta Quest
python teleop_spot.py --teleop-type meta

# SpaceMouse
python teleop_spot.py --teleop-type spacemouse

# Keyboard only (base control, no arm)
python teleop_spot.py --teleop-type keyboard

# if you want to record camera depth use: --use-depth
# to disable force limit use: --force-limit-disable

---

Project Structure

spot_teleop/                  <- Python package
├── __init__.py
├── spot_controller.py        # Spot SDK wrapper
├── spot_images.py            # Camera source helpers
├── camera_streamer.py        # Threaded camera streaming
├── demo_recorder.py          # NPZ/H5 demo recording
├── reader.py                 # OculusReader integration
└── utils/
    ├── spot_utils.py         # Math & conversion helpers
    └── teleop_inputs.py      # Meta / SpaceMouse / Keyboard input helpers

teleop_spot.py                <- Teleop entry point (meta / spacemouse / keyboard)
create_dataset.py             <- Build .h5 dataset from .npz demos
replay_hdf5.py                <- Replay recorded actions on Spot
pyproject.toml                <- Package metadata & dependencies
examples/                     <- Camera & input device examples

.npz File Structure

Each saved .npz contains one session dictionary with the following keys:

Key	Shape	Description
images_0	(N,H,W,C) (dtype=object)	Eye-in-hand RGB camera frames; each element is an HxW×3 uint8 ndarray.
images_1	(N,H,W,C) (dtype=object)	Agentview RGB camera stream (images_x, x>=1) when external camera(s) are enabled.
arm_joint_names	(J,) (string)	The J joint-names (strings) for all recorded "arm0.*" joints.
arm_q	(N, J) (float32)	Joint positions at each timestep.
arm_dq	(N, J) (float32)	Joint velocities at each timestep.
ee_pose	(N, 7) (float32)	End‑effector pose in body frame: [tx,ty,tz,qx,qy,qz,qw].
vision_in_body	(N, 7) (float32)	Vision‑frame origin expressed in body frame (same format as ee_pose).
body_vel	(N, 6) (float32)	Body linear & angular velocity in vision frame: [vx,vy,vz,wx,wy,wz].
gripper	(N, 1) (float32)	Gripper opening percentage.
ee_force	(N, 3) (float32)	Estimated end‑effector force vector in hand.
images_0_depth	(N,H,W) (dtype=object)	Eye-in-hand depth frames (HxW uint16). No colorization is applied.
images_1_depth	(N,H,W) (dtype=object)	Agentview depth stream (images_x_depth, x>=1) when external camera(s) are enabled.
t	(N, 1) (float64)	Timestamp for each capture, in seconds (including fractional).

Dataset Structure (.h5)

The dataset is organized in the following hierarchy:

arm_joint_names                (shape=(7,), dtype=|S8)
data/
├── demo_0/
|    ├── actions                    (shape=(N, 10), dtype=float32)
|    └── obs/
|        ├── arm_dq                 (shape=(N, 7), dtype=float32)
|        ├── arm_q                  (shape=(N, 7), dtype=float32)
|        ├── body_vel               (shape=(N, 6), dtype=float32)
|        ├── ee_force               (shape=(N, 3), dtype=float32)
|        ├── eef_pos                (shape=(N, 3), dtype=float32)
|        ├── eef_quat               (shape=(N, 4), dtype=float32)
|        ├── gripper                (shape=(N, 1), dtype=float32)
|        ├── images_0               (shape=(N, 240, 320, 3), dtype=uint8)
|        ├── images_0_depth         (shape=(N, 240, 320), dtype=uint16)
|        ├── images_1               (shape=(N, 240, 320, 3), dtype=uint8)
|        ├── images_1_depth         (shape=(N, 240, 320), dtype=uint16)
|        ├── t                      (shape=(N, 1), dtype=float64)
|        └── vision_in_body         (shape=(N, 7), dtype=float32)
├── demo_1/
...
├── demo_N/