Printer model
Other (please note in details)
Creality firmware version
V1.1.6.3
Klipper software_version
No response
Install method
install_k2.py (auto-installer)
What's happening
Adaptive mesh is working just fine, but purge is not.
What you expected to happen
I have a K2 Pro Combo, I mainly wanted this to use the adaptive prime line, as that awful stock prime line on the K2 Pro is just a pain in the back side to remove sometimes.
But it doesn't work, I still get the stock prime line, adaptive mesh works, but this presents another issue, the part is good and level, but the rest of the bed is not, and the stock prime line is being fully smooshed on the plate halfway, and the other half is okay, making it really hard to remove, I just damaged the build plate scaping it off, so if I can't get rid of the stock priming line, then I cant use the adaptive bed mesh, would be nice to include a remove option.
I don't really want to have to factory reset the machine, but looks I'm best to as there is too much to remove and undo in the macro cfg.
I also have K2's and I love the stock prime line, its perfectly fine, not sure why on Earth Creality doesnt do the same for the K2 Pro, I might have to fish through the Python scripts from both firmware's and see if I can pinpoint it and replicate to the K2 Pro, I did this with the K1's so hopefully its a similar setup on the K2's.
Steps to reproduce
No response
klippy.log tail
restore_bed_mesh override log lines
Sliced gcode file head (first 200 lines)
Anything else you've modified
No response
Printer model
Other (please note in details)
Creality firmware version
V1.1.6.3
Klipper software_version
No response
Install method
install_k2.py (auto-installer)
What's happening
Adaptive mesh is working just fine, but purge is not.
What you expected to happen
I have a K2 Pro Combo, I mainly wanted this to use the adaptive prime line, as that awful stock prime line on the K2 Pro is just a pain in the back side to remove sometimes.
But it doesn't work, I still get the stock prime line, adaptive mesh works, but this presents another issue, the part is good and level, but the rest of the bed is not, and the stock prime line is being fully smooshed on the plate halfway, and the other half is okay, making it really hard to remove, I just damaged the build plate scaping it off, so if I can't get rid of the stock priming line, then I cant use the adaptive bed mesh, would be nice to include a remove option.
I don't really want to have to factory reset the machine, but looks I'm best to as there is too much to remove and undo in the macro cfg.
I also have K2's and I love the stock prime line, its perfectly fine, not sure why on Earth Creality doesnt do the same for the K2 Pro, I might have to fish through the Python scripts from both firmware's and see if I can pinpoint it and replicate to the K2 Pro, I did this with the K1's so hopefully its a similar setup on the K2's.
Steps to reproduce
No response
klippy.log tail
restore_bed_mesh override log lines
Sliced gcode file head (first 200 lines)
Anything else you've modified
No response