mpconfigboard.h

// This file is part of the CircuitPython project: https://circuitpython.org
//
// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
//
// SPDX-License-Identifier: MIT

#pragma once

// Micropython setup

#define MICROPY_HW_BOARD_NAME       "Adafruit QT Py ESP32-S3 no psram"
#define MICROPY_HW_MCU_NAME         "ESP32S3"

#define MICROPY_HW_NEOPIXEL (&pin_GPIO39)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO38)

#define CIRCUITPY_BOARD_I2C         (2)
#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
                                     {.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

#define CIRCUITPY_BOARD_SPI         (1)
#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO36, .mosi = &pin_GPIO35, .miso = &pin_GPIO37}}

#define CIRCUITPY_BOARD_UART        (1)
#define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO5, .rx = &pin_GPIO16}}

#define DOUBLE_TAP_PIN (&pin_GPIO10)

// Reduce wifi.radio.tx_power due to the antenna design of this board
#define CIRCUITPY_WIFI_DEFAULT_TX_POWER   (15)