TOSHIBA_AC what means "Command":"Control" in the received data from remote

[whcrg]

What I receive from remote (on Tasmota using the library)
{"IrReceived":{"Protocol":"TOSHIBA_AC","Bits":72,"Data":"0xF20D03FC0140031052","Repeat":0,"IRHVAC":{"Vendor":"TOSHIBA_AC","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":21,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"On","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}

Other things I have found explanations or think I know what they mean but even reading some source code files didn't reveal what "Command":"Control" signifies, nor what other command types than control might exist? Any pointers?

Also beep off doesn't seem to stop beep when sending commands, is that expected to work?

[crankyoldgit]

TOSHIBA_AC protocol does not support Beep control.

You will have to take up the other questions with the Tasmota folks.
Some IR A/C protocols have command and status/sensor messages. We only support the command/control messages for TOSHIBA_AC.

[whcrg]

Did I understand right reading the sources that ifeel is also not supported for TOSHIBA_AC?

[crankyoldgit]

Correct. I don't see support for it. Normally need a sensor remote for that to work. If it exists, no one has decoded and simulated it for this library.
See the tests for what it can and can't see or do. They may help you understand.
E.g.

IRremoteESP8266/test/ir_Toshiba_test.cpp

Line 314 in 01634f1

EXPECT_EQ("Model: 0 (TOSHIBA REMOTE A), Temp: 17C, Power: On, "

[crankyoldgit]

See also the documentation for the class object.
https://crankyoldgit.github.io/IRremoteESP8266/doxygen/html/classIRToshibaAC.html

[whcrg]

I suspect my dad has Toshiba that has ifeel type function capable remote, will look into capturing what it sends to possibly extend the functionality.

The one I am peimarily using this does't, but the AC should per manual support such, hoping to sen room temperature data from the esp/home assistant.