diff --git a/lib/json/CMakeLists.txt b/lib/json/CMakeLists.txt index 05f7a1102e..c5fdd38c87 100644 --- a/lib/json/CMakeLists.txt +++ b/lib/json/CMakeLists.txt @@ -1,15 +1,25 @@ -cmake_minimum_required(VERSION 3.1) +cmake_minimum_required(VERSION 3.5...4.0) ## ## PROJECT ## name and version ## -project(nlohmann_json VERSION 3.9.1 LANGUAGES CXX) +project(nlohmann_json VERSION 3.12.0 LANGUAGES CXX) + +## +## MAIN_PROJECT CHECK +## determine if nlohmann_json is built as a subproject (using add_subdirectory) or if it is the main project +## +set(MAIN_PROJECT OFF) +if (CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_SOURCE_DIR) + set(MAIN_PROJECT ON) +endif() ## ## INCLUDE ## ## +set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake ${CMAKE_MODULE_PATH}) include(ExternalProject) ## @@ -21,18 +31,39 @@ if (POLICY CMP0077) cmake_policy(SET CMP0077 NEW) endif () -option(JSON_BuildTests "Build the unit tests when BUILD_TESTING is enabled." ON) -option(JSON_Install "Install CMake targets during install step." ON) -option(JSON_MultipleHeaders "Use non-amalgamated version of the library." OFF) -option(JSON_ImplicitConversions "Enable implicit conversions." ON) +# VERSION_GREATER_EQUAL is not available in CMake 3.1 +if(${MAIN_PROJECT} AND (${CMAKE_VERSION} VERSION_EQUAL 3.13 OR ${CMAKE_VERSION} VERSION_GREATER 3.13)) + set(JSON_BuildTests_INIT ON) +else() + set(JSON_BuildTests_INIT OFF) +endif() +option(JSON_BuildTests "Build the unit tests when BUILD_TESTING is enabled." ${JSON_BuildTests_INIT}) +option(JSON_CI "Enable CI build targets." OFF) +option(JSON_Diagnostics "Use extended diagnostic messages." OFF) +option(JSON_Diagnostic_Positions "Enable diagnostic positions." OFF) +option(JSON_GlobalUDLs "Place user-defined string literals in the global namespace." ON) +option(JSON_ImplicitConversions "Enable implicit conversions." ON) +option(JSON_DisableEnumSerialization "Disable default integer enum serialization." OFF) +option(JSON_LegacyDiscardedValueComparison "Enable legacy discarded value comparison." OFF) +option(JSON_Install "Install CMake targets during install step." ON) +option(JSON_MultipleHeaders "Use non-amalgamated version of the library." OFF) +option(JSON_SystemInclude "Include as system headers (skip for clang-tidy)." OFF) + +if (JSON_CI) + include(ci) +endif () ## ## CONFIGURATION ## include(GNUInstallDirs) -set(NLOHMANN_JSON_TARGET_NAME ${PROJECT_NAME}-vt) -set(NLOHMANN_JSON_CONFIG_INSTALL_DIR "${CMAKE_INSTALL_LIBDIR}/cmake/${PROJECT_NAME}" CACHE INTERNAL "") +if (NOT DEFINED NLOHMANN_JSON_TARGET_NAME) + # Allow overriding the target name when using FetchContent / add_subdirectory. + set(NLOHMANN_JSON_TARGET_NAME ${PROJECT_NAME}-vt) +endif() + +set(NLOHMANN_JSON_CONFIG_INSTALL_DIR "${CMAKE_INSTALL_DATADIR}/cmake/${PROJECT_NAME}" CACHE INTERNAL "") set(NLOHMANN_JSON_INCLUDE_INSTALL_DIR "${CMAKE_INSTALL_INCLUDEDIR}") set(NLOHMANN_JSON_TARGETS_EXPORT_NAME "${PROJECT_NAME}Targets") set(NLOHMANN_JSON_CMAKE_CONFIG_TEMPLATE "cmake/config.cmake.in") @@ -40,7 +71,7 @@ set(NLOHMANN_JSON_CMAKE_CONFIG_DIR "${CMAKE_CURRENT_BINARY_DIR}") set(NLOHMANN_JSON_CMAKE_VERSION_CONFIG_FILE "${NLOHMANN_JSON_CMAKE_CONFIG_DIR}/${PROJECT_NAME}ConfigVersion.cmake") set(NLOHMANN_JSON_CMAKE_PROJECT_CONFIG_FILE "${NLOHMANN_JSON_CMAKE_CONFIG_DIR}/${PROJECT_NAME}Config.cmake") set(NLOHMANN_JSON_CMAKE_PROJECT_TARGETS_FILE "${NLOHMANN_JSON_CMAKE_CONFIG_DIR}/${PROJECT_NAME}Targets.cmake") -set(NLOHMANN_JSON_PKGCONFIG_INSTALL_DIR "${CMAKE_INSTALL_LIBDIR}/pkgconfig") +set(NLOHMANN_JSON_PKGCONFIG_INSTALL_DIR "${CMAKE_INSTALL_DATADIR}/pkgconfig") if (JSON_MultipleHeaders) set(NLOHMANN_JSON_INCLUDE_BUILD_DIR "${PROJECT_SOURCE_DIR}/include/") @@ -51,7 +82,31 @@ else() endif() if (NOT JSON_ImplicitConversions) - message(STATUS "Implicit conversions are disabled") + message(STATUS "Implicit conversions are disabled (JSON_USE_IMPLICIT_CONVERSIONS=0)") +endif() + +if (JSON_DisableEnumSerialization) + message(STATUS "Enum integer serialization is disabled (JSON_DISABLE_ENUM_SERIALIZATION=0)") +endif() + +if (JSON_LegacyDiscardedValueComparison) + message(STATUS "Legacy discarded value comparison enabled (JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON=1)") +endif() + +if (JSON_Diagnostics) + message(STATUS "Diagnostics enabled (JSON_DIAGNOSTICS=1)") +endif() + +if (JSON_Diagnostic_Positions) + message(STATUS "Diagnostic positions enabled (JSON_DIAGNOSTIC_POSITIONS=1)") +endif() + +if (NOT JSON_GlobalUDLs) + message(STATUS "User-defined string literals are not put in the global namespace (JSON_USE_GLOBAL_UDLS=0)") +endif() + +if (JSON_SystemInclude) + set(NLOHMANN_JSON_SYSTEM_INCLUDE "SYSTEM") endif() ## @@ -69,14 +124,19 @@ endif() target_compile_definitions( ${NLOHMANN_JSON_TARGET_NAME} INTERFACE - JSON_USE_IMPLICIT_CONVERSIONS=$ + $<$>:JSON_USE_GLOBAL_UDLS=0> + $<$>:JSON_USE_IMPLICIT_CONVERSIONS=0> + $<$:JSON_DISABLE_ENUM_SERIALIZATION=1> + $<$:JSON_DIAGNOSTICS=1> + $<$:JSON_DIAGNOSTIC_POSITIONS=1> + $<$:JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON=1> ) target_include_directories( ${NLOHMANN_JSON_TARGET_NAME} - INTERFACE + ${NLOHMANN_JSON_SYSTEM_INCLUDE} INTERFACE $ - $ + $ ) ## add debug view definition file for msvc (natvis) @@ -93,19 +153,19 @@ endif() # Install a pkg-config file, so other tools can find this. CONFIGURE_FILE( - "${CMAKE_CURRENT_SOURCE_DIR}/cmake/pkg-config.pc.in" - "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pc" + "${CMAKE_CURRENT_SOURCE_DIR}/cmake/pkg-config.pc.in" + "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pc" + @ONLY ) ## ## TESTS ## create and configure the unit test target ## -include(CTest) #adds option BUILD_TESTING (default ON) - -if(BUILD_TESTING AND JSON_BuildTests) +if (JSON_BuildTests) + include(CTest) enable_testing() - add_subdirectory(test) + add_subdirectory(tests) endif() ## @@ -141,7 +201,7 @@ if(JSON_Install) FILES ${NLOHMANN_NATVIS_FILE} DESTINATION . ) -endif() + endif() export( TARGETS ${NLOHMANN_JSON_TARGET_NAME} NAMESPACE ${PROJECT_NAME}:: @@ -161,4 +221,5 @@ endif() FILES "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pc" DESTINATION ${NLOHMANN_JSON_PKGCONFIG_INSTALL_DIR} ) + include(CPack) endif() diff --git a/lib/json/cmake/ci.cmake b/lib/json/cmake/ci.cmake new file mode 100644 index 0000000000..ef4c257b18 --- /dev/null +++ b/lib/json/cmake/ci.cmake @@ -0,0 +1,713 @@ +# number of parallel jobs for CTest +set(N 10) + +############################################################################### +# Needed tools. +############################################################################### + +include(FindPython3) +find_package(Python3 COMPONENTS Interpreter) + +find_program(CLANG_TOOL NAMES clang++-HEAD clang++ clang++-20 clang++-19 clang++-18 clang++-17 clang++-16 clang++-15 clang++-14 clang++-13 clang++-12 clang++-11 clang++) +execute_process(COMMAND ${CLANG_TOOL} --version OUTPUT_VARIABLE CLANG_TOOL_VERSION ERROR_VARIABLE CLANG_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" CLANG_TOOL_VERSION "${CLANG_TOOL_VERSION}") +message(STATUS "🔖 Clang ${CLANG_TOOL_VERSION} (${CLANG_TOOL})") + +find_program(CLANG_TIDY_TOOL NAMES clang-tidy-20 clang-tidy-19 clang-tidy-18 clang-tidy-17 clang-tidy-16 clang-tidy-15 clang-tidy-14 clang-tidy-13 clang-tidy-12 clang-tidy-11 clang-tidy) +execute_process(COMMAND ${CLANG_TIDY_TOOL} --version OUTPUT_VARIABLE CLANG_TIDY_TOOL_VERSION ERROR_VARIABLE CLANG_TIDY_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" CLANG_TIDY_TOOL_VERSION "${CLANG_TIDY_TOOL_VERSION}") +message(STATUS "🔖 Clang-Tidy ${CLANG_TIDY_TOOL_VERSION} (${CLANG_TIDY_TOOL})") + +message(STATUS "🔖 CMake ${CMAKE_VERSION} (${CMAKE_COMMAND})") + +find_program(GCC_TOOL NAMES g++-latest g++-HEAD g++ g++-15 g++-14 g++-13 g++-12 g++-11 g++-10) +execute_process(COMMAND ${GCC_TOOL} --version OUTPUT_VARIABLE GCC_TOOL_VERSION ERROR_VARIABLE GCC_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" GCC_TOOL_VERSION "${GCC_TOOL_VERSION}") +message(STATUS "🔖 GCC ${GCC_TOOL_VERSION} (${GCC_TOOL})") + +find_program(GCOV_TOOL NAMES gcov-HEAD gcov gcov-15 gcov-14 gcov-13 gcov-12 gcov-11 gcov-10) +execute_process(COMMAND ${GCOV_TOOL} --version OUTPUT_VARIABLE GCOV_TOOL_VERSION ERROR_VARIABLE GCOV_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" GCOV_TOOL_VERSION "${GCOV_TOOL_VERSION}") +message(STATUS "🔖 GCOV ${GCOV_TOOL_VERSION} (${GCOV_TOOL})") + +find_program(GIT_TOOL NAMES git) +execute_process(COMMAND ${GIT_TOOL} --version OUTPUT_VARIABLE GIT_TOOL_VERSION ERROR_VARIABLE GIT_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" GIT_TOOL_VERSION "${GIT_TOOL_VERSION}") +message(STATUS "🔖 Git ${GIT_TOOL_VERSION} (${GIT_TOOL})") + +find_program(IWYU_TOOL NAMES include-what-you-use iwyu) +execute_process(COMMAND ${IWYU_TOOL} --version OUTPUT_VARIABLE IWYU_TOOL_VERSION ERROR_VARIABLE IWYU_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" IWYU_TOOL_VERSION "${IWYU_TOOL_VERSION}") +message(STATUS "🔖 include-what-you-use ${IWYU_TOOL_VERSION} (${IWYU_TOOL})") + +find_program(INFER_TOOL NAMES infer) +execute_process(COMMAND ${INFER_TOOL} --version OUTPUT_VARIABLE INFER_TOOL_VERSION ERROR_VARIABLE INFER_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" INFER_TOOL_VERSION "${INFER_TOOL_VERSION}") +message(STATUS "🔖 Infer ${INFER_TOOL_VERSION} (${INFER_TOOL})") + +find_program(LCOV_TOOL NAMES lcov) +execute_process(COMMAND ${LCOV_TOOL} --version OUTPUT_VARIABLE LCOV_TOOL_VERSION ERROR_VARIABLE LCOV_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" LCOV_TOOL_VERSION "${LCOV_TOOL_VERSION}") +message(STATUS "🔖 LCOV ${LCOV_TOOL_VERSION} (${LCOV_TOOL})") + +find_program(NINJA_TOOL NAMES ninja) +execute_process(COMMAND ${NINJA_TOOL} --version OUTPUT_VARIABLE NINJA_TOOL_VERSION ERROR_VARIABLE NINJA_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" NINJA_TOOL_VERSION "${NINJA_TOOL_VERSION}") +message(STATUS "🔖 Ninja ${NINJA_TOOL_VERSION} (${NINJA_TOOL})") + +find_program(OCLINT_TOOL NAMES oclint-json-compilation-database) +find_program(OCLINT_VERSION_TOOL NAMES oclint) +execute_process(COMMAND ${OCLINT_VERSION_TOOL} --version OUTPUT_VARIABLE OCLINT_TOOL_VERSION ERROR_VARIABLE OCLINT_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" OCLINT_TOOL_VERSION "${OCLINT_TOOL_VERSION}") +message(STATUS "🔖 OCLint ${OCLINT_TOOL_VERSION} (${OCLINT_TOOL})") + +find_program(VALGRIND_TOOL NAMES valgrind) +execute_process(COMMAND ${VALGRIND_TOOL} --version OUTPUT_VARIABLE VALGRIND_TOOL_VERSION ERROR_VARIABLE VALGRIND_TOOL_VERSION) +string(REGEX MATCH "[0-9]+(\\.[0-9]+)+" VALGRIND_TOOL_VERSION "${VALGRIND_TOOL_VERSION}") +message(STATUS "🔖 Valgrind ${VALGRIND_TOOL_VERSION} (${VALGRIND_TOOL})") + +find_program(GENHTML_TOOL NAMES genhtml) +find_program(PLOG_CONVERTER_TOOL NAMES plog-converter) +find_program(PVS_STUDIO_ANALYZER_TOOL NAMES pvs-studio-analyzer) +find_program(SCAN_BUILD_TOOL NAMES scan-build-15 scan-build-14 scan-build-13 scan-build-12 scan-build-11 scan-build) + +# the individual source files +file(GLOB_RECURSE SRC_FILES ${PROJECT_SOURCE_DIR}/include/nlohmann/*.hpp) + +############################################################################### +# Thorough check with recent compilers +############################################################################### + +include(clang_flags) +include(gcc_flags) + +add_custom_target(ci_test_gcc + COMMAND CXX=${GCC_TOOL} CXXFLAGS="${GCC_CXXFLAGS}" ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_gcc + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_gcc + COMMAND cd ${PROJECT_BINARY_DIR}/build_gcc && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with GCC using maximal warning flags" +) + +add_custom_target(ci_test_clang + COMMAND CXX=${CLANG_TOOL} CXXFLAGS="${CLANG_CXXFLAGS}" ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_clang + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_clang + COMMAND cd ${PROJECT_BINARY_DIR}/build_clang && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with Clang using maximal warning flags" +) + +############################################################################### +# Different C++ Standards. +############################################################################### + +foreach(CXX_STANDARD 11 14 17 20 23 26) + add_custom_target(ci_test_gcc_cxx${CXX_STANDARD} + COMMAND CXX=${GCC_TOOL} CXXFLAGS="${GCC_CXXFLAGS}" ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -DJSON_TestStandards=${CXX_STANDARD} + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_gcc_cxx${CXX_STANDARD} + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_gcc_cxx${CXX_STANDARD} + COMMAND cd ${PROJECT_BINARY_DIR}/build_gcc_cxx${CXX_STANDARD} && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with GCC for C++${CXX_STANDARD}" + ) + + add_custom_target(ci_test_clang_cxx${CXX_STANDARD} + COMMAND CXX=${CLANG_TOOL} CXXFLAGS="${CLANG_CXXFLAGS}" ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -DJSON_TestStandards=${CXX_STANDARD} + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_clang_cxx${CXX_STANDARD} + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_clang_cxx${CXX_STANDARD} + COMMAND cd ${PROJECT_BINARY_DIR}/build_clang_cxx${CXX_STANDARD} && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with Clang for C++${CXX_STANDARD}" + ) + + add_custom_target(ci_test_clang_libcxx_cxx${CXX_STANDARD} + COMMAND CXX=${CLANG_TOOL} CXXFLAGS="${CLANG_CXXFLAGS}" ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -DJSON_TestStandards=${CXX_STANDARD} + -DCMAKE_CXX_FLAGS="-stdlib=libc++" + -DCMAKE_EXE_LINKER_FLAGS="-lc++abi" + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_clang_cxx${CXX_STANDARD} + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_clang_cxx${CXX_STANDARD} + COMMAND cd ${PROJECT_BINARY_DIR}/build_clang_cxx${CXX_STANDARD} && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with Clang for C++${CXX_STANDARD} (libc++)" + ) +endforeach() + +############################################################################### +# Disable exceptions. +############################################################################### + +add_custom_target(ci_test_noexceptions + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DCMAKE_CXX_FLAGS=-DJSON_NOEXCEPTION -DDOCTEST_TEST_FILTER=--no-throw + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_noexceptions + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_noexceptions + COMMAND cd ${PROJECT_BINARY_DIR}/build_noexceptions && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with exceptions switched off" +) + +############################################################################### +# Disable implicit conversions. +############################################################################### + +add_custom_target(ci_test_noimplicitconversions + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_ImplicitConversions=OFF + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_noimplicitconversions + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_noimplicitconversions + COMMAND cd ${PROJECT_BINARY_DIR}/build_noimplicitconversions && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with implicit conversions switched off" +) + +############################################################################### +# Enable improved diagnostics. +############################################################################### + +add_custom_target(ci_test_diagnostics + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_Diagnostics=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_diagnostics + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_diagnostics + COMMAND cd ${PROJECT_BINARY_DIR}/build_diagnostics && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with improved diagnostics enabled" +) + +############################################################################### +# Enable diagnostic positions support. +############################################################################### + +add_custom_target(ci_test_diagnostic_positions + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_Diagnostic_Positions=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_diagnostic_positions + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_diagnostic_positions + COMMAND cd ${PROJECT_BINARY_DIR}/build_diagnostic_positions && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with diagnostic positions enabled" +) + +############################################################################### +# Enable legacy discarded value comparison. +############################################################################### + +add_custom_target(ci_test_legacycomparison + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_LegacyDiscardedValueComparison=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_legacycomparison + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_legacycomparison + COMMAND cd ${PROJECT_BINARY_DIR}/build_legacycomparison && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with legacy discarded value comparison enabled" +) + +############################################################################### +# Disable global UDLs. +############################################################################### + +add_custom_target(ci_test_noglobaludls + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_GlobalUDLs=OFF + -DCMAKE_CXX_FLAGS=-DJSON_TEST_NO_GLOBAL_UDLS + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_noglobaludls + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_noglobaludls + COMMAND cd ${PROJECT_BINARY_DIR}/build_noglobaludls && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with global UDLs disabled" +) + +############################################################################### +# Coverage. +############################################################################### + +add_custom_target(ci_test_coverage + COMMAND CXX=g++ ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja -DCMAKE_CXX_FLAGS="--coverage;-fprofile-arcs;-ftest-coverage" + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_coverage + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_coverage + COMMAND cd ${PROJECT_BINARY_DIR}/build_coverage && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + + COMMAND CXX=g++ ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja -DCMAKE_CXX_FLAGS="-m32;--coverage;-fprofile-arcs;-ftest-coverage" + -DJSON_BuildTests=ON -DJSON_32bitTest=ONLY + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_coverage32 + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_coverage32 + COMMAND cd ${PROJECT_BINARY_DIR}/build_coverage32 && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + + COMMAND ${LCOV_TOOL} --directory . --capture --output-file json.info --rc branch_coverage=1 --rc geninfo_unexecuted_blocks=1 --ignore-errors mismatch --ignore-errors unused + COMMAND ${LCOV_TOOL} -e json.info ${SRC_FILES} --output-file json.info.filtered --rc branch_coverage=1 --ignore-errors unused + COMMAND ${CMAKE_SOURCE_DIR}/tests/thirdparty/imapdl/filterbr.py json.info.filtered > json.info.filtered.noexcept + COMMAND genhtml --title "JSON for Modern C++" --legend --demangle-cpp --output-directory html --show-details --branch-coverage json.info.filtered.noexcept + + COMMENT "Compile and test with coverage" +) + +############################################################################### +# Sanitizers. +############################################################################### + +set(CLANG_CXX_FLAGS_SANITIZER "-g -O1 -fsanitize=address -fsanitize=undefined -fsanitize=integer -fsanitize=nullability -fno-omit-frame-pointer -fno-sanitize-recover=all -fno-sanitize=unsigned-integer-overflow -fno-sanitize=unsigned-shift-base") + +add_custom_target(ci_test_clang_sanitizer + COMMAND CXX=${CLANG_TOOL} CXXFLAGS=${CLANG_CXX_FLAGS_SANITIZER} ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_clang_sanitizer + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_clang_sanitizer + COMMAND cd ${PROJECT_BINARY_DIR}/build_clang_sanitizer && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test with sanitizers" +) + +############################################################################### +# Check if header is amalgamated and sources are properly indented. +############################################################################### + +file(GLOB_RECURSE INDENT_FILES + ${PROJECT_SOURCE_DIR}/include/nlohmann/*.hpp + ${PROJECT_SOURCE_DIR}/tests/src/*.cpp + ${PROJECT_SOURCE_DIR}/tests/src/*.hpp + ${PROJECT_SOURCE_DIR}/tests/benchmarks/src/benchmarks.cpp + ${PROJECT_SOURCE_DIR}/docs/examples/*.cpp +) + +set(include_dir ${PROJECT_SOURCE_DIR}/single_include/nlohmann) +set(tool_dir ${PROJECT_SOURCE_DIR}/tools/amalgamate) +add_custom_target(ci_test_amalgamation + COMMAND rm -fr ${include_dir}/json.hpp~ ${include_dir}/json_fwd.hpp~ + COMMAND cp ${include_dir}/json.hpp ${include_dir}/json.hpp~ + COMMAND cp ${include_dir}/json_fwd.hpp ${include_dir}/json_fwd.hpp~ + + COMMAND ${Python3_EXECUTABLE} -mvenv venv_astyle + COMMAND venv_astyle/bin/pip3 --quiet install -r ${CMAKE_SOURCE_DIR}/tools/astyle/requirements.txt + COMMAND venv_astyle/bin/astyle --version + + COMMAND ${Python3_EXECUTABLE} ${tool_dir}/amalgamate.py -c ${tool_dir}/config_json.json -s . + COMMAND ${Python3_EXECUTABLE} ${tool_dir}/amalgamate.py -c ${tool_dir}/config_json_fwd.json -s . + COMMAND venv_astyle/bin/astyle --project=tools/astyle/.astylerc --suffix=none ${include_dir}/json.hpp ${include_dir}/json_fwd.hpp + + COMMAND diff ${include_dir}/json.hpp~ ${include_dir}/json.hpp + COMMAND diff ${include_dir}/json_fwd.hpp~ ${include_dir}/json_fwd.hpp + + COMMAND venv_astyle/bin/astyle --project=tools/astyle/.astylerc --suffix=orig ${INDENT_FILES} + COMMAND for FILE in `find . -name '*.orig'`\; do false \; done + + WORKING_DIRECTORY ${PROJECT_SOURCE_DIR} + COMMENT "Check amalgamation and indentation" +) + +############################################################################### +# Build and test using the amalgamated header +############################################################################### + +add_custom_target(ci_test_single_header + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_MultipleHeaders=OFF -DJSON_FastTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_single_header + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_single_header + COMMAND cd ${PROJECT_BINARY_DIR}/build_single_header && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Compile and test single-header version" +) + +############################################################################### +# Valgrind. +############################################################################### + +add_custom_target(ci_test_valgrind + COMMAND CXX=${GCC_TOOL} ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_Valgrind=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_valgrind + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_valgrind + COMMAND cd ${PROJECT_BINARY_DIR}/build_valgrind && ${CMAKE_CTEST_COMMAND} -L valgrind --parallel ${N} --output-on-failure + COMMENT "Compile and test with Valgrind" +) + +############################################################################### +# Check code with Clang Static Analyzer. +############################################################################### + +set(CLANG_ANALYZER_CHECKS "fuchsia.HandleChecker,nullability.NullableDereferenced,nullability.NullablePassedToNonnull,nullability.NullableReturnedFromNonnull,optin.cplusplus.UninitializedObject,optin.cplusplus.VirtualCall,optin.mpi.MPI-Checker,optin.osx.OSObjectCStyleCast,optin.osx.cocoa.localizability.EmptyLocalizationContextChecker,optin.osx.cocoa.localizability.NonLocalizedStringChecker,optin.performance.GCDAntipattern,optin.performance.Padding,optin.portability.UnixAPI,security.FloatLoopCounter,security.insecureAPI.DeprecatedOrUnsafeBufferHandling,security.insecureAPI.bcmp,security.insecureAPI.bcopy,security.insecureAPI.bzero,security.insecureAPI.rand,security.insecureAPI.strcpy,valist.CopyToSelf,valist.Uninitialized,valist.Unterminated,webkit.NoUncountedMemberChecker,webkit.RefCntblBaseVirtualDtor,core.CallAndMessage,core.DivideZero,core.NonNullParamChecker,core.NullDereference,core.StackAddressEscape,core.UndefinedBinaryOperatorResult,core.VLASize,core.uninitialized.ArraySubscript,core.uninitialized.Assign,core.uninitialized.Branch,core.uninitialized.CapturedBlockVariable,core.uninitialized.UndefReturn,cplusplus.InnerPointer,cplusplus.Move,cplusplus.NewDelete,cplusplus.NewDeleteLeaks,cplusplus.PlacementNew,cplusplus.PureVirtualCall,deadcode.DeadStores,nullability.NullPassedToNonnull,nullability.NullReturnedFromNonnull,osx.API,osx.MIG,osx.NumberObjectConversion,osx.OSObjectRetainCount,osx.ObjCProperty,osx.SecKeychainAPI,osx.cocoa.AtSync,osx.cocoa.AutoreleaseWrite,osx.cocoa.ClassRelease,osx.cocoa.Dealloc,osx.cocoa.IncompatibleMethodTypes,osx.cocoa.Loops,osx.cocoa.MissingSuperCall,osx.cocoa.NSAutoreleasePool,osx.cocoa.NSError,osx.cocoa.NilArg,osx.cocoa.NonNilReturnValue,osx.cocoa.ObjCGenerics,osx.cocoa.RetainCount,osx.cocoa.RunLoopAutoreleaseLeak,osx.cocoa.SelfInit,osx.cocoa.SuperDealloc,osx.cocoa.UnusedIvars,osx.cocoa.VariadicMethodTypes,osx.coreFoundation.CFError,osx.coreFoundation.CFNumber,osx.coreFoundation.CFRetainRelease,osx.coreFoundation.containers.OutOfBounds,osx.coreFoundation.containers.PointerSizedValues,security.insecureAPI.UncheckedReturn,security.insecureAPI.decodeValueOfObjCType,security.insecureAPI.getpw,security.insecureAPI.gets,security.insecureAPI.mkstemp,security.insecureAPI.mktemp,security.insecureAPI.vfork,unix.API,unix.Malloc,unix.MallocSizeof,unix.MismatchedDeallocator,unix.Vfork,unix.cstring.BadSizeArg,unix.cstring.NullArg") + +add_custom_target(ci_clang_analyze + COMMAND CXX=${CLANG_TOOL} ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_clang_analyze + COMMAND cd ${PROJECT_BINARY_DIR}/build_clang_analyze && ${SCAN_BUILD_TOOL} -enable-checker ${CLANG_ANALYZER_CHECKS} --use-c++=${CLANG_TOOL} -analyze-headers -o ${PROJECT_BINARY_DIR}/report ninja + COMMENT "Check code with Clang Analyzer" +) + +############################################################################### +# Check code with Cppcheck. +############################################################################### + +add_custom_target(ci_cppcheck + COMMAND mkdir -p cppcheck + COMMAND clang -dM -E -x c++ -std=c++11 ${CMAKE_SOURCE_DIR}/include/nlohmann/thirdparty/hedley/hedley.hpp > default_defines.hpp 2> /dev/null + COMMAND ${Python3_EXECUTABLE} -mvenv venv_cppcheck + COMMAND venv_cppcheck/bin/pip3 --quiet install -r ${CMAKE_SOURCE_DIR}/cmake/requirements/requirements-cppcheck.txt + COMMAND venv_cppcheck/bin/cppcheck --enable=warning --check-level=exhaustive --inline-suppr --inconclusive --force + --std=c++11 ${PROJECT_SOURCE_DIR}/include/nlohmann/json.hpp -I ${CMAKE_SOURCE_DIR}/include + --error-exitcode=1 --relative-paths=${PROJECT_SOURCE_DIR} -j ${N} --include=default_defines.hpp + --cppcheck-build-dir=cppcheck --check-level=exhaustive + -UJSON_CATCH_USER -UJSON_TRY_USER -UJSON_ASSERT -UJSON_INTERNAL_CATCH -UJSON_THROW + -DJSON_HAS_CPP_11 -UJSON_HAS_CPP_14 -UJSON_HAS_CPP_17 -UJSON_HAS_CPP_20 -UJSON_HAS_THREE_WAY_COMPARISON + COMMENT "Check code with Cppcheck" +) + +############################################################################### +# Check code with cpplint. +############################################################################### + +add_custom_target(ci_cpplint + COMMAND ${Python3_EXECUTABLE} -mvenv venv_cpplint + COMMAND venv_cpplint/bin/pip3 --quiet install -r ${CMAKE_SOURCE_DIR}/cmake/requirements/requirements-cpplint.txt + COMMAND venv_cpplint/bin/cpplint --filter=-whitespace,-legal,-runtime/references,-runtime/explicit,-runtime/indentation_namespace,-readability/casting,-readability/nolint --quiet --recursive ${SRC_FILES} + COMMENT "Check code with cpplint" + WORKING_DIRECTORY ${PROJECT_BINARY_DIR} +) + +############################################################################### +# Check code with OCLint. +############################################################################### + +file(COPY ${PROJECT_SOURCE_DIR}/single_include/nlohmann/json.hpp DESTINATION ${PROJECT_BINARY_DIR}/src_single) +file(RENAME ${PROJECT_BINARY_DIR}/src_single/json.hpp ${PROJECT_BINARY_DIR}/src_single/all.cpp) +file(APPEND "${PROJECT_BINARY_DIR}/src_single/all.cpp" "\n\nint main()\n{}\n") + +add_executable(single_all ${PROJECT_BINARY_DIR}/src_single/all.cpp) +target_compile_features(single_all PRIVATE cxx_std_11) + +add_custom_target(ci_oclint + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug + -DCMAKE_EXPORT_COMPILE_COMMANDS=ON + -DJSON_BuildTests=OFF -DJSON_CI=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_oclint + COMMAND ${OCLINT_TOOL} -i ${PROJECT_BINARY_DIR}/build_oclint/src_single/all.cpp -p ${PROJECT_BINARY_DIR}/build_oclint -- + -report-type html -enable-global-analysis --max-priority-1=0 --max-priority-2=1000 --max-priority-3=2000 + --disable-rule=MultipleUnaryOperator + --disable-rule=DoubleNegative + --disable-rule=ShortVariableName + --disable-rule=GotoStatement + --disable-rule=LongLine + -o ${PROJECT_BINARY_DIR}/build_oclint/oclint_report.html + COMMENT "Check code with OCLint" +) + +############################################################################### +# Check code with Clang-Tidy. +############################################################################### + +add_custom_target(ci_clang_tidy + COMMAND CXX=${CLANG_TOOL} ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_CXX_CLANG_TIDY=${CLANG_TIDY_TOOL} + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_clang_tidy + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_clang_tidy + COMMENT "Check code with Clang-Tidy" +) + +############################################################################### +# Check code with PVS-Studio Analyzer . +############################################################################### + +add_custom_target(ci_pvs_studio + COMMAND CXX=${CLANG_TOOL} ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug + -DCMAKE_EXPORT_COMPILE_COMMANDS=ON + -DJSON_BuildTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_pvs_studio + COMMAND cd ${PROJECT_BINARY_DIR}/build_pvs_studio && ${PVS_STUDIO_ANALYZER_TOOL} analyze -j 10 + COMMAND cd ${PROJECT_BINARY_DIR}/build_pvs_studio && ${PLOG_CONVERTER_TOOL} -a'GA:1,2;64:1;CS' -t fullhtml PVS-Studio.log -o pvs + COMMENT "Check code with PVS Studio" +) + +############################################################################### +# Check code with Infer static analyzer. +############################################################################### + +add_custom_target(ci_infer + COMMAND mkdir -p ${PROJECT_BINARY_DIR}/build_infer + COMMAND cd ${PROJECT_BINARY_DIR}/build_infer && ${INFER_TOOL} compile -- ${CMAKE_COMMAND} -DCMAKE_BUILD_TYPE=Debug ${PROJECT_SOURCE_DIR} -DJSON_BuildTests=ON + COMMAND cd ${PROJECT_BINARY_DIR}/build_infer && ${INFER_TOOL} run -- make + COMMENT "Check code with Infer" +) + +############################################################################### +# Run test suite with previously downloaded test data. +############################################################################### + +add_custom_target(ci_offline_testdata + COMMAND mkdir -p ${PROJECT_BINARY_DIR}/build_offline_testdata/test_data + COMMAND cd ${PROJECT_BINARY_DIR}/build_offline_testdata/test_data && ${GIT_TOOL} clone -c advice.detachedHead=false --branch v3.1.0 https://github.com/nlohmann/json_test_data.git --quiet --depth 1 + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON -DJSON_TestDataDirectory=${PROJECT_BINARY_DIR}/build_offline_testdata/test_data/json_test_data + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_offline_testdata + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_offline_testdata + COMMAND cd ${PROJECT_BINARY_DIR}/build_offline_testdata && ${CMAKE_CTEST_COMMAND} --parallel ${N} --output-on-failure + COMMENT "Check code with previously downloaded test data" +) + +############################################################################### +# Run test suite when project was not checked out from Git +############################################################################### + +add_custom_target(ci_non_git_tests + COMMAND git config --global --add safe.directory ${PROJECT_SOURCE_DIR} + COMMAND mkdir -p ${PROJECT_BINARY_DIR}/build_non_git_tests/sources + COMMAND cd ${PROJECT_SOURCE_DIR} && for FILE in `${GIT_TOOL} ls-tree --name-only HEAD`\; do cp -r $$FILE ${PROJECT_BINARY_DIR}/build_non_git_tests/sources \; done + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -S${PROJECT_BINARY_DIR}/build_non_git_tests/sources -B${PROJECT_BINARY_DIR}/build_non_git_tests + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_non_git_tests + COMMAND cd ${PROJECT_BINARY_DIR}/build_non_git_tests && ${CMAKE_CTEST_COMMAND} --parallel ${N} -LE git_required --output-on-failure + COMMENT "Check code when project was not checked out from Git" +) + +############################################################################### +# Run test suite and exclude tests that change installed files +############################################################################### + +add_custom_target(ci_reproducible_tests + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_reproducible_tests + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_reproducible_tests + COMMAND cd ${PROJECT_BINARY_DIR}/build_reproducible_tests && ${CMAKE_CTEST_COMMAND} --parallel ${N} -LE not_reproducible --output-on-failure + COMMENT "Check code and exclude tests that change installed files" +) + +############################################################################### +# Check if every header in the include folder includes sufficient headers to +# be compiled individually. +############################################################################### + +set(iwyu_path_and_options ${IWYU_TOOL} -Xiwyu --max_line_length=300) + +foreach(SRC_FILE ${SRC_FILES}) + # get relative path of the header file + file(RELATIVE_PATH RELATIVE_SRC_FILE "${PROJECT_SOURCE_DIR}/include/nlohmann" "${SRC_FILE}") + # replace slashes and strip suffix + string(REPLACE "/" "_" RELATIVE_SRC_FILE "${RELATIVE_SRC_FILE}") + string(REPLACE ".hpp" "" RELATIVE_SRC_FILE "${RELATIVE_SRC_FILE}") + # create code file + file(WRITE "${PROJECT_BINARY_DIR}/src_single/${RELATIVE_SRC_FILE}.cpp" "#include \"${SRC_FILE}\" // IWYU pragma: keep\n\nint main()\n{}\n") + # create executable + add_executable(single_${RELATIVE_SRC_FILE} EXCLUDE_FROM_ALL ${PROJECT_BINARY_DIR}/src_single/${RELATIVE_SRC_FILE}.cpp) + target_include_directories(single_${RELATIVE_SRC_FILE} PRIVATE ${PROJECT_SOURCE_DIR}/include) + target_compile_features(single_${RELATIVE_SRC_FILE} PRIVATE cxx_std_11) + set_property(TARGET single_${RELATIVE_SRC_FILE} PROPERTY CXX_INCLUDE_WHAT_YOU_USE "${iwyu_path_and_options}") + # remember binary for ci_single_binaries target + list(APPEND single_binaries single_${RELATIVE_SRC_FILE}) +endforeach() + +add_custom_target(ci_single_binaries + DEPENDS ${single_binaries} + COMMENT "Check if headers are self-contained" +) + +############################################################################### +# Benchmarks +############################################################################### + +add_custom_target(ci_benchmarks + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Release -GNinja + -S${PROJECT_SOURCE_DIR}/benchmarks -B${PROJECT_BINARY_DIR}/build_benchmarks + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_benchmarks --target json_benchmarks + COMMAND cd ${PROJECT_BINARY_DIR}/build_benchmarks && ./json_benchmarks + COMMENT "Run benchmarks" +) + +############################################################################### +# CMake flags +############################################################################### + +# we test the project with different CMake versions: +# - CMake 3.5 (the earliest supported) +# - CMake 3.31.6 (the latest 3.x release) +# - CMake 4.0.0 (the latest release) + +function(ci_get_cmake version var) + set(${var} ${PROJECT_BINARY_DIR}/cmake-${version}/bin/cmake) + add_custom_command( + OUTPUT ${${var}} + COMMAND wget -nc https://github.com/Kitware/CMake/releases/download/v${version}/cmake-${version}.tar.gz + COMMAND tar xfz cmake-${version}.tar.gz + COMMAND rm cmake-${version}.tar.gz + # -DCMAKE_POLICY_VERSION_MINIMUM=3.5 required to compile older CMake versions with CMake 4.0.0 + COMMAND cmake -S cmake-${version} -B cmake-${version} -DCMAKE_POLICY_VERSION_MINIMUM=3.5 + COMMAND cmake --build cmake-${version} --parallel 10 + WORKING_DIRECTORY ${PROJECT_BINARY_DIR} + COMMENT "Download CMake ${version}" + ) + set(${var} ${${var}} PARENT_SCOPE) +endfunction() + +ci_get_cmake(3.5.0 CMAKE_3_5_0_BINARY) +ci_get_cmake(3.31.6 CMAKE_3_31_6_BINARY) +ci_get_cmake(4.0.0 CMAKE_4_0_0_BINARY) + +# the tests require CMake 3.13 or later, so they are excluded for CMake 3.5.0 +set(JSON_CMAKE_FLAGS_3_5_0 JSON_Diagnostics JSON_Diagnostic_Positions JSON_GlobalUDLs JSON_ImplicitConversions JSON_DisableEnumSerialization + JSON_LegacyDiscardedValueComparison JSON_Install JSON_MultipleHeaders JSON_SystemInclude JSON_Valgrind) +set(JSON_CMAKE_FLAGS_3_31_6 JSON_BuildTests ${JSON_CMAKE_FLAGS_3_31_6}) +set(JSON_CMAKE_FLAGS_4_0_0 JSON_BuildTests ${JSON_CMAKE_FLAGS_3_5_0}) + +function(ci_add_cmake_flags_targets flag min_version) + string(TOLOWER "ci_cmake_flag_${flag}" flag_target) + string(REPLACE . _ min_version_var ${min_version}) + set(cmake_binary ${CMAKE_${min_version_var}_BINARY}) + add_custom_target(${flag_target}_${min_version}_2 + COMMENT "Check CMake flag ${flag} (CMake ${CMAKE_VERSION})" + COMMAND ${CMAKE_COMMAND} + -Werror=dev + -D${flag}=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_${flag_target} + ) + add_custom_target(${flag_target}_${min_version_var} + COMMENT "Check CMake flag ${JSON_CMAKE_FLAG} (CMake ${min_version})" + COMMAND mkdir -pv ${PROJECT_BINARY_DIR}/build_${flag_target}_${min_version_var} + COMMAND cd ${PROJECT_BINARY_DIR}/build_${flag_target}_${min_version_var} + && ${cmake_binary} -Werror=dev ${PROJECT_SOURCE_DIR} -D${flag}=ON + DEPENDS ${cmake_binary} + ) + list(APPEND JSON_CMAKE_FLAG_TARGETS ${JSON_CMAKE_FLAG_TARGET} ${flag_target}_${min_version_var}) + list(APPEND JSON_CMAKE_FLAG_BUILD_DIRS ${PROJECT_BINARY_DIR}/build_${flag_target} ${PROJECT_BINARY_DIR}/build_${flag_target}_${min_version_var}) + set(JSON_CMAKE_FLAG_TARGETS ${JSON_CMAKE_FLAG_TARGETS} PARENT_SCOPE) + set(JSON_CMAKE_FLAG_BUILD_DIRS ${JSON_CMAKE_FLAG_BUILD_DIRS} PARENT_SCOPE) +endfunction() + +foreach(JSON_CMAKE_FLAG ${JSON_CMAKE_FLAGS_3_5_0}) + ci_add_cmake_flags_targets(${JSON_CMAKE_FLAG} 3.5.0) +endforeach() + +foreach(JSON_CMAKE_FLAG ${JSON_CMAKE_FLAGS_3_31_6}) + ci_add_cmake_flags_targets(${JSON_CMAKE_FLAG} 3.31.6) +endforeach() + +foreach(JSON_CMAKE_FLAG ${JSON_CMAKE_FLAGS_4_0_0}) + ci_add_cmake_flags_targets(${JSON_CMAKE_FLAG} 4.0.0) +endforeach() + +add_custom_target(ci_cmake_flags + DEPENDS ${JSON_CMAKE_FLAG_TARGETS} + COMMENT "Check CMake flags" +) + +############################################################################### +# Use more installed compilers. +############################################################################### + +foreach(COMPILER g++-4.8 g++-4.9 g++-5 g++-6 g++-7 g++-8 g++-9 g++-10 g++-11 clang++-3.5 clang++-3.6 clang++-3.7 clang++-3.8 clang++-3.9 clang++-4.0 clang++-5.0 clang++-6.0 clang++-7 clang++-8 clang++-9 clang++-10 clang++-11 clang++-12 clang++-13 clang++-14 clang++-15 clang++-16 clang++-17 clang++-18 clang++-19 clang++-20) + find_program(COMPILER_TOOL NAMES ${COMPILER}) + if (COMPILER_TOOL) + unset(ADDITIONAL_FLAGS) + + add_custom_target(ci_test_compiler_${COMPILER} + COMMAND CXX=${COMPILER} ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_compiler_${COMPILER} + ${ADDITIONAL_FLAGS} + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_compiler_${COMPILER} + COMMAND cd ${PROJECT_BINARY_DIR}/build_compiler_${COMPILER} && ${CMAKE_CTEST_COMMAND} --parallel ${N} --exclude-regex "test-unicode" --output-on-failure + COMMENT "Compile and test with ${COMPILER}" + ) + endif() + unset(COMPILER_TOOL CACHE) +endforeach() + +add_custom_target(ci_test_compiler_default + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_compiler_default + ${ADDITIONAL_FLAGS} + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_compiler_default --parallel ${N} + COMMAND cd ${PROJECT_BINARY_DIR}/build_compiler_default && ${CMAKE_CTEST_COMMAND} --parallel ${N} --exclude-regex "test-unicode" -LE git_required --output-on-failure + COMMENT "Compile and test with default C++ compiler" +) + +############################################################################### +# CUDA example +############################################################################### + +add_custom_target(ci_cuda_example + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DCMAKE_CUDA_HOST_COMPILER=g++-8 + -S${PROJECT_SOURCE_DIR}/tests/cuda_example -B${PROJECT_BINARY_DIR}/build_cuda_example + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_cuda_example +) + +############################################################################### +# Intel C++ Compiler +############################################################################### + +add_custom_target(ci_icpc + COMMAND ${CMAKE_COMMAND} + -DCMAKE_BUILD_TYPE=Debug -GNinja + -DCMAKE_C_COMPILER=icc -DCMAKE_CXX_COMPILER=icpc + -DJSON_BuildTests=ON -DJSON_FastTests=ON + -S${PROJECT_SOURCE_DIR} -B${PROJECT_BINARY_DIR}/build_icpc + COMMAND ${CMAKE_COMMAND} --build ${PROJECT_BINARY_DIR}/build_icpc + COMMAND cd ${PROJECT_BINARY_DIR}/build_icpc && ${CMAKE_CTEST_COMMAND} --parallel ${N} --exclude-regex "test-unicode" --output-on-failure + COMMENT "Compile and test with ICPC" +) + +############################################################################### +# REUSE +############################################################################### + +add_custom_target(ci_reuse_compliance + COMMAND ${Python3_EXECUTABLE} -mvenv venv_reuse + COMMAND venv_reuse/bin/pip3 --quiet install -r ${PROJECT_SOURCE_DIR}/cmake/requirements/requirements-reuse.txt + COMMAND venv_reuse/bin/reuse --root ${PROJECT_SOURCE_DIR} lint + COMMENT "Check REUSE specification compliance" +) + +############################################################################### +# test documentation +############################################################################### + +add_custom_target(ci_test_examples + COMMAND make CXX="${GCC_TOOL}" check_output_portable -j8 + WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}/docs + COMMENT "Check that all examples compile and create the desired output" +) + +add_custom_target(ci_test_build_documentation + COMMAND ${Python3_EXECUTABLE} -mvenv venv + COMMAND venv/bin/pip3 --quiet install -r requirements.txt + COMMAND make build + WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}/docs/mkdocs + COMMENT "Build the documentation" +) + +############################################################################### +# Clean up all generated files. +############################################################################### + +add_custom_target(ci_clean + COMMAND rm -fr ${PROJECT_BINARY_DIR}/build_* cmake-3.5.0-Darwin64 ${JSON_CMAKE_FLAG_BUILD_DIRS} ${single_binaries} + COMMENT "Clean generated directories" +) diff --git a/lib/json/cmake/clang_flags.cmake b/lib/json/cmake/clang_flags.cmake new file mode 100644 index 0000000000..7c1e9cc641 --- /dev/null +++ b/lib/json/cmake/clang_flags.cmake @@ -0,0 +1,20 @@ +# Ignored Clang warnings: +# -Wno-c++98-compat The library targets C++11. +# -Wno-c++98-compat-pedantic The library targets C++11. +# -Wno-deprecated-declarations The library contains annotations for deprecated functions. +# -Wno-extra-semi-stmt The library uses assert which triggers this warning. +# -Wno-padded We do not care about padding warnings. +# -Wno-covered-switch-default All switches list all cases and a default case. +# -Wno-unsafe-buffer-usage Otherwise Doctest would not compile. + +set(CLANG_CXXFLAGS + -Werror + -Weverything + -Wno-c++98-compat + -Wno-c++98-compat-pedantic + -Wno-deprecated-declarations + -Wno-extra-semi-stmt + -Wno-padded + -Wno-covered-switch-default + -Wno-unsafe-buffer-usage +) diff --git a/lib/json/cmake/download_test_data.cmake b/lib/json/cmake/download_test_data.cmake index a3f3f199f1..1bb998dae6 100644 --- a/lib/json/cmake/download_test_data.cmake +++ b/lib/json/cmake/download_test_data.cmake @@ -1,5 +1,5 @@ set(JSON_TEST_DATA_URL https://github.com/nlohmann/json_test_data) -set(JSON_TEST_DATA_VERSION 3.0.0) +set(JSON_TEST_DATA_VERSION 3.1.0) # if variable is set, use test data from given directory rather than downloading them if(JSON_TestDataDirectory) @@ -48,7 +48,7 @@ message(STATUS "Operating system: ${OS_VERSION_STRINGS}") # determine the compiler (for debug and support purposes) if (MSVC) execute_process(COMMAND ${CMAKE_CXX_COMPILER} OUTPUT_VARIABLE CXX_VERSION_RESULT OUTPUT_STRIP_TRAILING_WHITESPACE ERROR_VARIABLE CXX_VERSION_RESULT ERROR_STRIP_TRAILING_WHITESPACE) - set(CMAKE_CXX_COMPILER "${CXX_VERSION_RESULT}; MSVC_VERSION=${MSVC_VERSION}; MSVC_TOOLSET_VERSION=${MSVC_TOOLSET_VERSION}") + set(CXX_VERSION_RESULT "${CXX_VERSION_RESULT}; MSVC_VERSION=${MSVC_VERSION}; MSVC_TOOLSET_VERSION=${MSVC_TOOLSET_VERSION}") else() execute_process(COMMAND ${CMAKE_CXX_COMPILER} --version OUTPUT_VARIABLE CXX_VERSION_RESULT OUTPUT_STRIP_TRAILING_WHITESPACE) endif() diff --git a/lib/json/cmake/gcc_flags.cmake b/lib/json/cmake/gcc_flags.cmake new file mode 100644 index 0000000000..848630f332 --- /dev/null +++ b/lib/json/cmake/gcc_flags.cmake @@ -0,0 +1,348 @@ +# Warning flags determined for GCC 14.2.0 with https://github.com/nlohmann/gcc_flags: +# Ignored GCC warnings: +# -Wno-abi-tag We do not care about ABI tags. +# -Wno-aggregate-return The library uses aggregate returns. +# -Wno-long-long The library uses the long long type to interface with system functions. +# -Wno-namespaces The library uses namespaces. +# -Wno-nrvo Doctest triggers this warning. +# -Wno-padded We do not care about padding warnings. +# -Wno-system-headers We do not care about warnings in system headers. +# -Wno-templates The library uses templates. + +set(GCC_CXXFLAGS + -pedantic + -Werror + --all-warnings + --extra-warnings + -W + -WNSObject-attribute + -Wno-abi-tag + -Waddress + -Waddress-of-packed-member + -Wno-aggregate-return + -Waggressive-loop-optimizations + -Waligned-new=all + -Wall + -Walloc-size + -Walloc-zero + -Walloca + -Wanalyzer-allocation-size + -Wanalyzer-deref-before-check + -Wanalyzer-double-fclose + -Wanalyzer-double-free + -Wanalyzer-exposure-through-output-file + -Wanalyzer-exposure-through-uninit-copy + -Wanalyzer-fd-access-mode-mismatch + -Wanalyzer-fd-double-close + -Wanalyzer-fd-leak + -Wanalyzer-fd-phase-mismatch + -Wanalyzer-fd-type-mismatch + -Wanalyzer-fd-use-after-close + -Wanalyzer-fd-use-without-check + -Wanalyzer-file-leak + -Wanalyzer-free-of-non-heap + -Wanalyzer-imprecise-fp-arithmetic + -Wanalyzer-infinite-loop + -Wanalyzer-infinite-recursion + -Wanalyzer-jump-through-null + -Wanalyzer-malloc-leak + -Wanalyzer-mismatching-deallocation + -Wanalyzer-null-argument + -Wanalyzer-null-dereference + -Wanalyzer-out-of-bounds + -Wanalyzer-overlapping-buffers + -Wanalyzer-possible-null-argument + -Wanalyzer-possible-null-dereference + -Wanalyzer-putenv-of-auto-var + -Wanalyzer-shift-count-negative + -Wanalyzer-shift-count-overflow + -Wanalyzer-stale-setjmp-buffer + -Wanalyzer-symbol-too-complex + -Wanalyzer-tainted-allocation-size + -Wanalyzer-tainted-array-index + -Wanalyzer-tainted-assertion + -Wanalyzer-tainted-divisor + -Wanalyzer-tainted-offset + -Wanalyzer-tainted-size + -Wanalyzer-too-complex + -Wanalyzer-undefined-behavior-strtok + -Wanalyzer-unsafe-call-within-signal-handler + -Wanalyzer-use-after-free + -Wanalyzer-use-of-pointer-in-stale-stack-frame + -Wanalyzer-use-of-uninitialized-value + -Wanalyzer-va-arg-type-mismatch + -Wanalyzer-va-list-exhausted + -Wanalyzer-va-list-leak + -Wanalyzer-va-list-use-after-va-end + -Wanalyzer-write-to-const + -Wanalyzer-write-to-string-literal + -Warith-conversion + -Warray-bounds=2 + -Warray-compare + -Warray-parameter=2 + -Wattribute-alias=2 + -Wattribute-warning + -Wattributes + -Wbool-compare + -Wbool-operation + -Wbuiltin-declaration-mismatch + -Wbuiltin-macro-redefined + -Wc++0x-compat + -Wc++11-compat + -Wc++11-extensions + -Wc++14-compat + -Wc++14-extensions + -Wc++17-compat + -Wc++17-extensions + -Wc++1z-compat + -Wc++20-compat + -Wc++20-extensions + -Wc++23-extensions + -Wc++26-extensions + -Wc++2a-compat + -Wcalloc-transposed-args + -Wcannot-profile + -Wcast-align + -Wcast-align=strict + -Wcast-function-type + -Wcast-qual + -Wcast-user-defined + -Wcatch-value=3 + -Wchanges-meaning + -Wchar-subscripts + -Wclass-conversion + -Wclass-memaccess + -Wclobbered + -Wcomma-subscript + -Wcomment + -Wcomments + -Wcomplain-wrong-lang + -Wconditionally-supported + -Wconversion + -Wconversion-null + -Wcoverage-invalid-line-number + -Wcoverage-mismatch + -Wcoverage-too-many-conditions + -Wcpp + -Wctad-maybe-unsupported + -Wctor-dtor-privacy + -Wdangling-else + -Wdangling-pointer=2 + -Wdangling-reference + -Wdate-time + -Wdelete-incomplete + -Wdelete-non-virtual-dtor + -Wdeprecated + -Wdeprecated-copy + -Wdeprecated-copy-dtor + -Wdeprecated-declarations + -Wdeprecated-enum-enum-conversion + -Wdeprecated-enum-float-conversion + -Wdisabled-optimization + -Wdiv-by-zero + -Wdouble-promotion + -Wduplicated-branches + -Wduplicated-cond + -Weffc++ + -Welaborated-enum-base + -Wempty-body + -Wendif-labels + -Wenum-compare + -Wenum-conversion + -Wexceptions + -Wexpansion-to-defined + -Wextra + -Wextra-semi + -Wflex-array-member-not-at-end + -Wfloat-conversion + -Wfloat-equal + -Wformat -Wformat-contains-nul + -Wformat -Wformat-extra-args + -Wformat -Wformat-nonliteral + -Wformat -Wformat-security + -Wformat -Wformat-y2k + -Wformat -Wformat-zero-length + -Wformat-diag + -Wformat-overflow=2 + -Wformat-signedness + -Wformat-truncation=2 + -Wformat=2 + -Wframe-address + -Wfree-nonheap-object + -Wglobal-module + -Whardened + -Whsa + -Wif-not-aligned + -Wignored-attributes + -Wignored-qualifiers + -Wimplicit-fallthrough=5 + -Winaccessible-base + -Winfinite-recursion + -Winherited-variadic-ctor + -Winit-list-lifetime + -Winit-self + -Winline + -Wint-in-bool-context + -Wint-to-pointer-cast + -Winterference-size + -Winvalid-constexpr + -Winvalid-imported-macros + -Winvalid-memory-model + -Winvalid-offsetof + -Winvalid-pch + -Winvalid-utf8 + -Wliteral-suffix + -Wlogical-not-parentheses + -Wlogical-op + -Wno-long-long + -Wlto-type-mismatch + -Wmain + -Wmaybe-uninitialized + -Wmemset-elt-size + -Wmemset-transposed-args + -Wmisleading-indentation + -Wmismatched-dealloc + -Wmismatched-new-delete + -Wmismatched-tags + -Wmissing-attributes + -Wmissing-braces + -Wmissing-declarations + -Wmissing-field-initializers + -Wmissing-include-dirs + -Wmissing-profile + -Wmissing-requires + -Wmissing-template-keyword + -Wmultichar + -Wmultiple-inheritance + -Wmultistatement-macros + -Wno-namespaces + -Wnarrowing + -Wnoexcept + -Wnoexcept-type + -Wnon-template-friend + -Wnon-virtual-dtor + -Wnonnull + -Wnonnull-compare + -Wnormalized=nfkc + -Wno-nrvo + -Wnull-dereference + -Wodr + -Wold-style-cast + -Wopenacc-parallelism + -Wopenmp + -Wopenmp-simd + -Woverflow + -Woverlength-strings + -Woverloaded-virtual=2 + -Wpacked + -Wpacked-bitfield-compat + -Wpacked-not-aligned + -Wno-padded + -Wparentheses + -Wpedantic + -Wpessimizing-move + -Wplacement-new=2 + -Wpmf-conversions + -Wpointer-arith + -Wpointer-compare + -Wpragmas + -Wprio-ctor-dtor + -Wpsabi + -Wrange-loop-construct + -Wredundant-decls + -Wredundant-move + -Wredundant-tags + -Wregister + -Wreorder + -Wrestrict + -Wreturn-local-addr + -Wreturn-type + -Wscalar-storage-order + -Wself-move + -Wsequence-point + -Wshadow=compatible-local + -Wshadow=global + -Wshadow=local + -Wshift-count-negative + -Wshift-count-overflow + -Wshift-negative-value + -Wshift-overflow=2 + -Wsign-compare + -Wsign-conversion + -Wsign-promo + -Wsized-deallocation + -Wsizeof-array-argument + -Wsizeof-array-div + -Wsizeof-pointer-div + -Wsizeof-pointer-memaccess + -Wstack-protector + -Wstrict-aliasing=3 + -Wstrict-null-sentinel + -Wstrict-overflow + -Wstring-compare + -Wstringop-overflow=4 + -Wstringop-overread + -Wstringop-truncation + -Wsubobject-linkage + -Wsuggest-attribute=cold + -Wsuggest-attribute=const + -Wsuggest-attribute=format + -Wsuggest-attribute=malloc + -Wsuggest-attribute=noreturn + -Wsuggest-attribute=pure + -Wsuggest-attribute=returns_nonnull + -Wsuggest-final-methods + -Wsuggest-final-types + -Wsuggest-override + -Wswitch + -Wswitch-bool + -Wswitch-default + -Wswitch-enum + -Wswitch-outside-range + -Wswitch-unreachable + -Wsync-nand + -Wsynth + -Wno-system-headers + -Wtautological-compare + -Wno-templates + -Wterminate + -Wtrampolines + -Wtrigraphs + -Wtrivial-auto-var-init + -Wtsan + -Wtype-limits + -Wundef + -Wunicode + -Wuninitialized + -Wunknown-pragmas + -Wunreachable-code + -Wunsafe-loop-optimizations + -Wunused + -Wunused-but-set-parameter + -Wunused-but-set-variable + -Wunused-const-variable=2 + -Wunused-function + -Wunused-label + -Wunused-local-typedefs + -Wunused-macros + -Wunused-parameter + -Wunused-result + -Wunused-value + -Wunused-variable + -Wuse-after-free=3 + -Wuseless-cast + -Wvarargs + -Wvariadic-macros + -Wvector-operation-performance + -Wvexing-parse + -Wvirtual-inheritance + -Wvirtual-move-assign + -Wvla + -Wvla-parameter + -Wvolatile + -Wvolatile-register-var + -Wwrite-strings + -Wxor-used-as-pow + -Wzero-as-null-pointer-constant + -Wzero-length-bounds +) diff --git a/lib/json/cmake/pkg-config.pc.in b/lib/json/cmake/pkg-config.pc.in index 3541abf0ba..21a91a3cf3 100644 --- a/lib/json/cmake/pkg-config.pc.in +++ b/lib/json/cmake/pkg-config.pc.in @@ -1,4 +1,7 @@ -Name: ${PROJECT_NAME} +prefix=@CMAKE_INSTALL_PREFIX@ +includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@ + +Name: @PROJECT_NAME@ Description: JSON for Modern C++ -Version: ${PROJECT_VERSION} -Cflags: -I${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_INCLUDEDIR} +Version: @PROJECT_VERSION@ +Cflags: -I${includedir} diff --git a/lib/json/cmake/requirements/requirements-cppcheck.txt b/lib/json/cmake/requirements/requirements-cppcheck.txt new file mode 100644 index 0000000000..9119ad7b6b --- /dev/null +++ b/lib/json/cmake/requirements/requirements-cppcheck.txt @@ -0,0 +1 @@ +cppcheck==1.5.0 diff --git a/lib/json/cmake/requirements/requirements-cpplint.txt b/lib/json/cmake/requirements/requirements-cpplint.txt new file mode 100644 index 0000000000..abb438cc50 --- /dev/null +++ b/lib/json/cmake/requirements/requirements-cpplint.txt @@ -0,0 +1 @@ +cpplint==2.0.1 diff --git a/lib/json/cmake/requirements/requirements-reuse.txt b/lib/json/cmake/requirements/requirements-reuse.txt new file mode 100644 index 0000000000..e7677662c1 --- /dev/null +++ b/lib/json/cmake/requirements/requirements-reuse.txt @@ -0,0 +1 @@ +reuse==5.0.2 diff --git a/lib/json/cmake/scripts/gen_bazel_build_file.cmake b/lib/json/cmake/scripts/gen_bazel_build_file.cmake new file mode 100644 index 0000000000..e754d387d9 --- /dev/null +++ b/lib/json/cmake/scripts/gen_bazel_build_file.cmake @@ -0,0 +1,24 @@ +# generate Bazel BUILD file + +set(PROJECT_ROOT "${CMAKE_CURRENT_LIST_DIR}/../..") +set(BUILD_FILE "${PROJECT_ROOT}/BUILD.bazel") + +file(GLOB_RECURSE HEADERS LIST_DIRECTORIES false RELATIVE "${PROJECT_ROOT}" "include/*.hpp") + +file(WRITE "${BUILD_FILE}" [=[ +cc_library( + name = "json", + hdrs = [ +]=]) + +foreach(header ${HEADERS}) + file(APPEND "${BUILD_FILE}" " \"${header}\",\n") +endforeach() + +file(APPEND "${BUILD_FILE}" [=[ + ], + includes = ["include"], + visibility = ["//visibility:public"], + alwayslink = True, +) +]=]) diff --git a/lib/json/cmake/test.cmake b/lib/json/cmake/test.cmake new file mode 100644 index 0000000000..7105b97c33 --- /dev/null +++ b/lib/json/cmake/test.cmake @@ -0,0 +1,273 @@ +set(_json_test_cmake_list_file ${CMAKE_CURRENT_LIST_FILE}) + +############################################################################# +# download test data +############################################################################# + +include(download_test_data) + +# test fixture to download test data +add_test(NAME "download_test_data" COMMAND ${CMAKE_COMMAND} --build ${CMAKE_BINARY_DIR} + --target download_test_data +) +set_tests_properties(download_test_data PROPERTIES FIXTURES_SETUP TEST_DATA) + +if(JSON_Valgrind) + find_program(CMAKE_MEMORYCHECK_COMMAND valgrind) + message(STATUS "Executing test suite with Valgrind (${CMAKE_MEMORYCHECK_COMMAND})") + set(memcheck_command "${CMAKE_MEMORYCHECK_COMMAND} ${CMAKE_MEMORYCHECK_COMMAND_OPTIONS} --error-exitcode=1 --leak-check=full") + separate_arguments(memcheck_command) +endif() + +############################################################################# +# detect standard support +############################################################################# + +# C++11 is the minimum required +set(compiler_supports_cpp_11 TRUE) + +foreach(feature ${CMAKE_CXX_COMPILE_FEATURES}) + if (${feature} STREQUAL cxx_std_14) + set(compiler_supports_cpp_14 TRUE) + elseif (${feature} STREQUAL cxx_std_17) + set(compiler_supports_cpp_17 TRUE) + elseif (${feature} STREQUAL cxx_std_20) + set(compiler_supports_cpp_20 TRUE) + elseif (${feature} STREQUAL cxx_std_23) + set(compiler_supports_cpp_23 TRUE) + endif() +endforeach() + +############################################################################# +# test functions +############################################################################# + +############################################################################# +# json_test_set_test_options( +# all| +# [CXX_STANDARDS all|...] +# [COMPILE_DEFINITIONS ...] +# [COMPILE_FEATURES ...] +# [COMPILE_OPTIONS ...] +# [LINK_LIBRARIES ...] +# [LINK_OPTIONS ...] +# [TEST_PROPERTIES ...]) +# +# Supply test- and standard-specific build settings and/or test properties. +# Specify multiple tests using a list e.g., "test-foo;test-bar". +# +# Must be called BEFORE the test is created. +############################################################################# + +function(json_test_set_test_options tests) + cmake_parse_arguments(args "" "" + "CXX_STANDARDS;COMPILE_DEFINITIONS;COMPILE_FEATURES;COMPILE_OPTIONS;LINK_LIBRARIES;LINK_OPTIONS;TEST_PROPERTIES" + ${ARGN}) + + if(NOT args_CXX_STANDARDS) + set(args_CXX_STANDARDS "all") + endif() + + foreach(test ${tests}) + if("${test}" STREQUAL "all") + set(test "") + endif() + + foreach(cxx_standard ${args_CXX_STANDARDS}) + if("${cxx_standard}" STREQUAL "all") + if("${test}" STREQUAL "") + message(FATAL_ERROR "Not supported. Change defaults in: ${_json_test_cmake_list_file}") + endif() + set(test_interface _json_test_interface_${test}) + else() + set(test_interface _json_test_interface_${test}_cpp_${cxx_standard}) + endif() + + if(NOT TARGET ${test_interface}) + add_library(${test_interface} INTERFACE) + endif() + + target_compile_definitions(${test_interface} INTERFACE ${args_COMPILE_DEFINITIONS}) + target_compile_features(${test_interface} INTERFACE ${args_COMPILE_FEATURES}) + target_compile_options(${test_interface} INTERFACE ${args_COMPILE_OPTIONS}) + target_link_libraries (${test_interface} INTERFACE ${args_LINK_LIBRARIES}) + target_link_options(${test_interface} INTERFACE ${args_LINK_OPTIONS}) + #set_target_properties(${test_interface} PROPERTIES JSON_TEST_PROPERTIES "${args_TEST_PROPERTIES}") + set_property(DIRECTORY PROPERTY + ${test_interface}_TEST_PROPERTIES "${args_TEST_PROPERTIES}" + ) + endforeach() + endforeach() +endfunction() + +# for internal use by _json_test_add_test() +function(_json_test_apply_test_properties test_target properties_target) + #get_target_property(test_properties ${properties_target} JSON_TEST_PROPERTIES) + get_property(test_properties DIRECTORY PROPERTY ${properties_target}_TEST_PROPERTIES) + if(test_properties) + set_tests_properties(${test_target} PROPERTIES ${test_properties}) + endif() +endfunction() + +# for internal use by json_test_add_test_for() +function(_json_test_add_test test_name file main cxx_standard) + set(test_target ${test_name}_cpp${cxx_standard}) + + if(TARGET ${test_target}) + message(FATAL_ERROR "Target ${test_target} has already been added.") + endif() + + add_executable(${test_target} ${file}) + target_link_libraries(${test_target} PRIVATE ${main}) + + # set and require C++ standard + set_target_properties(${test_target} PROPERTIES + CXX_STANDARD ${cxx_standard} + CXX_STANDARD_REQUIRED ON + ) + + # apply standard-specific build settings + if(TARGET _json_test_interface__cpp_${cxx_standard}) + target_link_libraries(${test_target} PRIVATE _json_test_interface__cpp_${cxx_standard}) + endif() + + # apply test-specific build settings + if(TARGET _json_test_interface_${test_name}) + target_link_libraries(${test_target} PRIVATE _json_test_interface_${test_name}) + endif() + + # apply test- and standard-specific build settings + if(TARGET _json_test_interface_${test_name}_cpp_${cxx_standard}) + target_link_libraries(${test_target} PRIVATE + _json_test_interface_${test_name}_cpp_${cxx_standard} + ) + endif() + + if (JSON_FastTests) + add_test(NAME ${test_target} + COMMAND ${test_target} ${DOCTEST_TEST_FILTER} + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + ) + else() + add_test(NAME ${test_target} + COMMAND ${test_target} ${DOCTEST_TEST_FILTER} --no-skip + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + ) + endif() + set_tests_properties(${test_target} PROPERTIES LABELS "all" FIXTURES_REQUIRED TEST_DATA) + + # apply standard-specific test properties + if(TARGET _json_test_interface__cpp_${cxx_standard}) + _json_test_apply_test_properties(${test_target} _json_test_interface__cpp_${cxx_standard}) + endif() + + # apply test-specific test properties + if(TARGET _json_test_interface_${test_name}) + _json_test_apply_test_properties(${test_target} _json_test_interface_${test_name}) + endif() + + # apply test- and standard-specific test properties + if(TARGET _json_test_interface_${test_name}_cpp_${cxx_standard}) + _json_test_apply_test_properties(${test_target} + _json_test_interface_${test_name}_cpp_${cxx_standard} + ) + endif() + + if(JSON_Valgrind) + add_test(NAME ${test_target}_valgrind + COMMAND ${memcheck_command} $ ${DOCTEST_TEST_FILTER} + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + ) + set_tests_properties(${test_target}_valgrind PROPERTIES + LABELS "valgrind" FIXTURES_REQUIRED TEST_DATA + ) + endif() +endfunction() + +############################################################################# +# json_test_add_test_for( +# +# [NAME ] +# MAIN
+# [CXX_STANDARDS ...] [FORCE]) +# +# Given a unit-foo.cpp, produces +# +# test-foo_cpp +# +# if C++ standard is supported by the compiler and the +# source file contains JSON_HAS_CPP_. +# Use NAME to override the filename-derived test name. +# Use FORCE to create the test regardless of the file containing +# JSON_HAS_CPP_. +# Test targets are linked against
. +# CXX_STANDARDS defaults to "11". +############################################################################# + +function(json_test_add_test_for file) + cmake_parse_arguments(args "FORCE" "MAIN;NAME" "CXX_STANDARDS" ${ARGN}) + + if("${args_MAIN}" STREQUAL "") + message(FATAL_ERROR "Required argument MAIN
missing.") + endif() + + if("${args_NAME}" STREQUAL "") + get_filename_component(file_basename ${file} NAME_WE) + string(REGEX REPLACE "unit-([^$]+)" "test-\\1" test_name ${file_basename}) + else() + set(test_name ${args_NAME}) + if(NOT test_name MATCHES "test-[^$]+") + message(FATAL_ERROR "Test name must start with 'test-'.") + endif() + endif() + + if("${args_CXX_STANDARDS}" STREQUAL "") + set(args_CXX_STANDARDS 11) + endif() + + file(READ ${file} file_content) + foreach(cxx_standard ${args_CXX_STANDARDS}) + if(NOT compiler_supports_cpp_${cxx_standard}) + continue() + endif() + + # add unconditionally if C++11 (default) or forced + if(NOT ("${cxx_standard}" STREQUAL 11 OR args_FORCE)) + string(FIND "${file_content}" JSON_HAS_CPP_${cxx_standard} has_cpp_found) + if(${has_cpp_found} EQUAL -1) + continue() + endif() + endif() + + _json_test_add_test(${test_name} ${file} ${args_MAIN} ${cxx_standard}) + endforeach() +endfunction() + +############################################################################# +# json_test_should_build_32bit_test( +# ) +# +# Check if the 32bit unit test should be built based on the value of +# and store the result in the variables and +# . +############################################################################# + +function(json_test_should_build_32bit_test build_32bit_var build_32bit_only_var input) + set(${build_32bit_only_var} OFF PARENT_SCOPE) + string(TOUPPER "${input}" ${build_32bit_var}) + if("${${build_32bit_var}}" STREQUAL AUTO) + # check if compiler is targeting 32bit by default + include(CheckTypeSize) + check_type_size("size_t" sizeof_size_t LANGUAGE CXX) + if(${sizeof_size_t} AND ${sizeof_size_t} EQUAL 4) + message(STATUS "Auto-enabling 32bit unit test.") + set(${build_32bit_var} ON) + else() + set(${build_32bit_var} OFF) + endif() + elseif("${${build_32bit_var}}" STREQUAL ONLY) + set(${build_32bit_only_var} ON PARENT_SCOPE) + endif() + + set(${build_32bit_var} "${${build_32bit_var}}" PARENT_SCOPE) +endfunction() diff --git a/lib/json/include/nlohmann-vt/adl_serializer.hpp b/lib/json/include/nlohmann-vt/adl_serializer.hpp index 6a67bb1177..225a552b9d 100644 --- a/lib/json/include/nlohmann-vt/adl_serializer.hpp +++ b/lib/json/include/nlohmann-vt/adl_serializer.hpp @@ -1,49 +1,55 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include +#include #include #include +#include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN -template +/// @sa https://json.nlohmann.me/api/adl_serializer/ +template struct adl_serializer { - /*! - @brief convert a JSON value to any value type - - This function is usually called by the `get()` function of the - @ref basic_json class (either explicit or via conversion operators). - - @param[in] j JSON value to read from - @param[in,out] val value to write to - */ - template - static auto from_json(BasicJsonType&& j, ValueType& val) noexcept( + /// @brief convert a JSON value to any value type + /// @sa https://json.nlohmann.me/api/adl_serializer/from_json/ + template + static auto from_json(BasicJsonType && j, TargetType& val) noexcept( noexcept(::nlohmann::from_json(std::forward(j), val))) -> decltype(::nlohmann::from_json(std::forward(j), val), void()) { ::nlohmann::from_json(std::forward(j), val); } - /*! - @brief convert any value type to a JSON value - - This function is usually called by the constructors of the @ref basic_json - class. + /// @brief convert a JSON value to any value type + /// @sa https://json.nlohmann.me/api/adl_serializer/from_json/ + template + static auto from_json(BasicJsonType && j) noexcept( + noexcept(::nlohmann::from_json(std::forward(j), detail::identity_tag {}))) + -> decltype(::nlohmann::from_json(std::forward(j), detail::identity_tag {})) + { + return ::nlohmann::from_json(std::forward(j), detail::identity_tag {}); + } - @param[in,out] j JSON value to write to - @param[in] val value to read from - */ - template - static auto to_json(BasicJsonType& j, ValueType&& val) noexcept( - noexcept(::nlohmann::to_json(j, std::forward(val)))) - -> decltype(::nlohmann::to_json(j, std::forward(val)), void()) + /// @brief convert any value type to a JSON value + /// @sa https://json.nlohmann.me/api/adl_serializer/to_json/ + template + static auto to_json(BasicJsonType& j, TargetType && val) noexcept( + noexcept(::nlohmann::to_json(j, std::forward(val)))) + -> decltype(::nlohmann::to_json(j, std::forward(val)), void()) { - ::nlohmann::to_json(j, std::forward(val)); + ::nlohmann::to_json(j, std::forward(val)); } }; -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/byte_container_with_subtype.hpp b/lib/json/include/nlohmann-vt/byte_container_with_subtype.hpp index 5d391b84ee..fe5cc71e82 100644 --- a/lib/json/include/nlohmann-vt/byte_container_with_subtype.hpp +++ b/lib/json/include/nlohmann-vt/byte_container_with_subtype.hpp @@ -1,53 +1,56 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once -#include // uint8_t +#include // uint8_t, uint64_t #include // tie #include // move -namespace nlohmann { inline namespace vt -{ - -/*! -@brief an internal type for a backed binary type - -This type extends the template parameter @a BinaryType provided to `basic_json` -with a subtype used by BSON and MessagePack. This type exists so that the user -does not have to specify a type themselves with a specific naming scheme in -order to override the binary type. +#include -@tparam BinaryType container to store bytes (`std::vector` by - default) +NLOHMANN_JSON_NAMESPACE_BEGIN -@since version 3.8.0 -*/ +/// @brief an internal type for a backed binary type +/// @sa https://json.nlohmann.me/api/byte_container_with_subtype/ template class byte_container_with_subtype : public BinaryType { public: - /// the type of the underlying container using container_type = BinaryType; + using subtype_type = std::uint64_t; + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/byte_container_with_subtype/ byte_container_with_subtype() noexcept(noexcept(container_type())) : container_type() {} + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/byte_container_with_subtype/ byte_container_with_subtype(const container_type& b) noexcept(noexcept(container_type(b))) : container_type(b) {} + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/byte_container_with_subtype/ byte_container_with_subtype(container_type&& b) noexcept(noexcept(container_type(std::move(b)))) : container_type(std::move(b)) {} - byte_container_with_subtype(const container_type& b, std::uint8_t subtype) noexcept(noexcept(container_type(b))) + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/byte_container_with_subtype/ + byte_container_with_subtype(const container_type& b, subtype_type subtype_) noexcept(noexcept(container_type(b))) : container_type(b) - , m_subtype(subtype) + , m_subtype(subtype_) , m_has_subtype(true) {} - byte_container_with_subtype(container_type&& b, std::uint8_t subtype) noexcept(noexcept(container_type(std::move(b)))) + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/byte_container_with_subtype/ + byte_container_with_subtype(container_type&& b, subtype_type subtype_) noexcept(noexcept(container_type(std::move(b)))) : container_type(std::move(b)) - , m_subtype(subtype) + , m_subtype(subtype_) , m_has_subtype(true) {} @@ -62,96 +65,30 @@ class byte_container_with_subtype : public BinaryType return !(rhs == *this); } - /*! - @brief sets the binary subtype - - Sets the binary subtype of the value, also flags a binary JSON value as - having a subtype, which has implications for serialization. - - @complexity Constant. - - @exceptionsafety No-throw guarantee: this member function never throws - exceptions. - - @sa @ref subtype() -- return the binary subtype - @sa @ref clear_subtype() -- clears the binary subtype - @sa @ref has_subtype() -- returns whether or not the binary value has a - subtype - - @since version 3.8.0 - */ - void set_subtype(std::uint8_t subtype) noexcept + /// @brief sets the binary subtype + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/set_subtype/ + void set_subtype(subtype_type subtype_) noexcept { - m_subtype = subtype; + m_subtype = subtype_; m_has_subtype = true; } - /*! - @brief return the binary subtype - - Returns the numerical subtype of the value if it has a subtype. If it does - not have a subtype, this function will return size_t(-1) as a sentinel - value. - - @return the numerical subtype of the binary value - - @complexity Constant. - - @exceptionsafety No-throw guarantee: this member function never throws - exceptions. - - @sa @ref set_subtype() -- sets the binary subtype - @sa @ref clear_subtype() -- clears the binary subtype - @sa @ref has_subtype() -- returns whether or not the binary value has a - subtype - - @since version 3.8.0 - */ - constexpr std::uint8_t subtype() const noexcept + /// @brief return the binary subtype + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/subtype/ + constexpr subtype_type subtype() const noexcept { - return m_subtype; + return m_has_subtype ? m_subtype : static_cast(-1); } - /*! - @brief return whether the value has a subtype - - @return whether the value has a subtype - - @complexity Constant. - - @exceptionsafety No-throw guarantee: this member function never throws - exceptions. - - @sa @ref subtype() -- return the binary subtype - @sa @ref set_subtype() -- sets the binary subtype - @sa @ref clear_subtype() -- clears the binary subtype - - @since version 3.8.0 - */ + /// @brief return whether the value has a subtype + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/has_subtype/ constexpr bool has_subtype() const noexcept { return m_has_subtype; } - /*! - @brief clears the binary subtype - - Clears the binary subtype and flags the value as not having a subtype, which - has implications for serialization; for instance MessagePack will prefer the - bin family over the ext family. - - @complexity Constant. - - @exceptionsafety No-throw guarantee: this member function never throws - exceptions. - - @sa @ref subtype() -- return the binary subtype - @sa @ref set_subtype() -- sets the binary subtype - @sa @ref has_subtype() -- returns whether or not the binary value has a - subtype - - @since version 3.8.0 - */ + /// @brief clears the binary subtype + /// @sa https://json.nlohmann.me/api/byte_container_with_subtype/clear_subtype/ void clear_subtype() noexcept { m_subtype = 0; @@ -159,8 +96,8 @@ class byte_container_with_subtype : public BinaryType } private: - std::uint8_t m_subtype = 0; + subtype_type m_subtype = 0; bool m_has_subtype = false; }; -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/abi_macros.hpp b/lib/json/include/nlohmann-vt/detail/abi_macros.hpp new file mode 100644 index 0000000000..dc328686dc --- /dev/null +++ b/lib/json/include/nlohmann-vt/detail/abi_macros.hpp @@ -0,0 +1,113 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + +#pragma once + +// This file contains all macro definitions affecting or depending on the ABI + +#ifndef JSON_SKIP_LIBRARY_VERSION_CHECK + #if defined(NLOHMANN_JSON_VERSION_MAJOR) && defined(NLOHMANN_JSON_VERSION_MINOR) && defined(NLOHMANN_JSON_VERSION_PATCH) + #if NLOHMANN_JSON_VERSION_MAJOR != 3 || NLOHMANN_JSON_VERSION_MINOR != 12 || NLOHMANN_JSON_VERSION_PATCH != 0 + #warning "Already included a different version of the library!" + #endif + #endif +#endif + +#define NLOHMANN_JSON_VERSION_MAJOR 3 // NOLINT(modernize-macro-to-enum) +#define NLOHMANN_JSON_VERSION_MINOR 12 // NOLINT(modernize-macro-to-enum) +#define NLOHMANN_JSON_VERSION_PATCH 0 // NOLINT(modernize-macro-to-enum) + +#ifndef JSON_DIAGNOSTICS + #define JSON_DIAGNOSTICS 0 +#endif + +#ifndef JSON_DIAGNOSTIC_POSITIONS + #define JSON_DIAGNOSTIC_POSITIONS 0 +#endif + +#ifndef JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON + #define JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON 0 +#endif + +#if JSON_DIAGNOSTICS + #define NLOHMANN_JSON_ABI_TAG_DIAGNOSTICS _diag +#else + #define NLOHMANN_JSON_ABI_TAG_DIAGNOSTICS +#endif + +#if JSON_DIAGNOSTIC_POSITIONS + #define NLOHMANN_JSON_ABI_TAG_DIAGNOSTIC_POSITIONS _dp +#else + #define NLOHMANN_JSON_ABI_TAG_DIAGNOSTIC_POSITIONS +#endif + +#if JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON + #define NLOHMANN_JSON_ABI_TAG_LEGACY_DISCARDED_VALUE_COMPARISON _ldvcmp +#else + #define NLOHMANN_JSON_ABI_TAG_LEGACY_DISCARDED_VALUE_COMPARISON +#endif + +#ifndef NLOHMANN_JSON_NAMESPACE_NO_VERSION + #define NLOHMANN_JSON_NAMESPACE_NO_VERSION 0 +#endif + +// Construct the namespace ABI tags component +#define NLOHMANN_JSON_ABI_TAGS_CONCAT_EX(a, b, c) json_abi ## a ## b ## c +#define NLOHMANN_JSON_ABI_TAGS_CONCAT(a, b, c) \ + NLOHMANN_JSON_ABI_TAGS_CONCAT_EX(a, b, c) + +#define NLOHMANN_JSON_ABI_TAGS \ + NLOHMANN_JSON_ABI_TAGS_CONCAT( \ + NLOHMANN_JSON_ABI_TAG_DIAGNOSTICS, \ + NLOHMANN_JSON_ABI_TAG_LEGACY_DISCARDED_VALUE_COMPARISON, \ + NLOHMANN_JSON_ABI_TAG_DIAGNOSTIC_POSITIONS) + +// Construct the namespace version component +#define NLOHMANN_JSON_NAMESPACE_VERSION_CONCAT_EX(major, minor, patch) \ + _v ## major ## _ ## minor ## _ ## patch +#define NLOHMANN_JSON_NAMESPACE_VERSION_CONCAT(major, minor, patch) \ + NLOHMANN_JSON_NAMESPACE_VERSION_CONCAT_EX(major, minor, patch) + +#if NLOHMANN_JSON_NAMESPACE_NO_VERSION +#define NLOHMANN_JSON_NAMESPACE_VERSION +#else +#define NLOHMANN_JSON_NAMESPACE_VERSION \ + NLOHMANN_JSON_NAMESPACE_VERSION_CONCAT(NLOHMANN_JSON_VERSION_MAJOR, \ + NLOHMANN_JSON_VERSION_MINOR, \ + NLOHMANN_JSON_VERSION_PATCH) +#endif + +// Combine namespace components +#define NLOHMANN_JSON_NAMESPACE_CONCAT_EX(a, b) a ## b +#define NLOHMANN_JSON_NAMESPACE_CONCAT(a, b) \ + NLOHMANN_JSON_NAMESPACE_CONCAT_EX(a, b) + +#ifndef NLOHMANN_JSON_NAMESPACE +#define NLOHMANN_JSON_NAMESPACE \ + nlohmann::NLOHMANN_JSON_NAMESPACE_CONCAT( \ + NLOHMANN_JSON_ABI_TAGS, \ + NLOHMANN_JSON_NAMESPACE_VERSION) +#endif + +#ifndef NLOHMANN_JSON_NAMESPACE_BEGIN +#define NLOHMANN_JSON_NAMESPACE_BEGIN \ + namespace nlohmann \ + { \ + inline namespace NLOHMANN_JSON_NAMESPACE_CONCAT( \ + NLOHMANN_JSON_ABI_TAGS, \ + NLOHMANN_JSON_NAMESPACE_VERSION) \ + { \ + inline namespace vt { +#endif + +#ifndef NLOHMANN_JSON_NAMESPACE_END +#define NLOHMANN_JSON_NAMESPACE_END \ + } /* namespace vt */ \ + } /* namespace (inline namespace) NOLINT(readability/namespace) */ \ + } // namespace nlohmann +#endif diff --git a/lib/json/include/nlohmann-vt/detail/conversions/from_json.hpp b/lib/json/include/nlohmann-vt/detail/conversions/from_json.hpp index 29f6b2287f..5cf001d9f7 100644 --- a/lib/json/include/nlohmann-vt/detail/conversions/from_json.hpp +++ b/lib/json/include/nlohmann-vt/detail/conversions/from_json.hpp @@ -1,3 +1,11 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // transform @@ -5,6 +13,9 @@ #include // forward_list #include // inserter, front_inserter, end #include // map +#ifdef JSON_HAS_CPP_17 + #include // optional +#endif #include // string #include // tuple, make_tuple #include // is_arithmetic, is_same, is_enum, underlying_type, is_convertible @@ -15,23 +26,44 @@ #include #include #include +#include +#include #include +#include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + template -void from_json(const BasicJsonType& j, typename std::nullptr_t& n) +inline void from_json(const BasicJsonType& j, typename std::nullptr_t& n) { if (JSON_HEDLEY_UNLIKELY(!j.is_null())) { - JSON_THROW(type_error::create(302, "type must be null, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be null, but is ", j.type_name()), &j)); } n = nullptr; } +#ifdef JSON_HAS_CPP_17 +#ifndef JSON_USE_IMPLICIT_CONVERSIONS +template +void from_json(const BasicJsonType& j, std::optional& opt) +{ + if (j.is_null()) + { + opt = std::nullopt; + } + else + { + opt.emplace(j.template get()); + } +} + +#endif // JSON_USE_IMPLICIT_CONVERSIONS +#endif // JSON_HAS_CPP_17 + // overloads for basic_json template parameters template < typename BasicJsonType, typename ArithmeticType, enable_if_t < std::is_arithmetic::value&& @@ -57,83 +89,92 @@ void get_arithmetic_value(const BasicJsonType& j, ArithmeticType& val) break; } + case value_t::null: + case value_t::object: + case value_t::array: + case value_t::string: + case value_t::boolean: + case value_t::binary: + case value_t::discarded: default: - JSON_THROW(type_error::create(302, "type must be number, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be number, but is ", j.type_name()), &j)); } } template -void from_json(const BasicJsonType& j, typename BasicJsonType::boolean_t& b) +inline void from_json(const BasicJsonType& j, typename BasicJsonType::boolean_t& b) { if (JSON_HEDLEY_UNLIKELY(!j.is_boolean())) { - JSON_THROW(type_error::create(302, "type must be boolean, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be boolean, but is ", j.type_name()), &j)); } b = *j.template get_ptr(); } template -void from_json(const BasicJsonType& j, typename BasicJsonType::string_t& s) +inline void from_json(const BasicJsonType& j, typename BasicJsonType::string_t& s) { if (JSON_HEDLEY_UNLIKELY(!j.is_string())) { - JSON_THROW(type_error::create(302, "type must be string, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be string, but is ", j.type_name()), &j)); } s = *j.template get_ptr(); } template < - typename BasicJsonType, typename ConstructibleStringType, + typename BasicJsonType, typename StringType, enable_if_t < - is_constructible_string_type::value&& - !std::is_same::value, - int > = 0 > -void from_json(const BasicJsonType& j, ConstructibleStringType& s) + std::is_assignable::value + && is_detected_exact::value + && !std::is_same::value + && !is_json_ref::value, int > = 0 > +inline void from_json(const BasicJsonType& j, StringType& s) { if (JSON_HEDLEY_UNLIKELY(!j.is_string())) { - JSON_THROW(type_error::create(302, "type must be string, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be string, but is ", j.type_name()), &j)); } s = *j.template get_ptr(); } template -void from_json(const BasicJsonType& j, typename BasicJsonType::number_float_t& val) +inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_float_t& val) { get_arithmetic_value(j, val); } template -void from_json(const BasicJsonType& j, typename BasicJsonType::number_unsigned_t& val) +inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_unsigned_t& val) { get_arithmetic_value(j, val); } template -void from_json(const BasicJsonType& j, typename BasicJsonType::number_integer_t& val) +inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_integer_t& val) { get_arithmetic_value(j, val); } +#if !JSON_DISABLE_ENUM_SERIALIZATION template::value, int> = 0> -void from_json(const BasicJsonType& j, EnumType& e) +inline void from_json(const BasicJsonType& j, EnumType& e) { typename std::underlying_type::type val; get_arithmetic_value(j, val); e = static_cast(val); } +#endif // JSON_DISABLE_ENUM_SERIALIZATION // forward_list doesn't have an insert method template::value, int> = 0> -void from_json(const BasicJsonType& j, std::forward_list& l) +inline void from_json(const BasicJsonType& j, std::forward_list& l) { if (JSON_HEDLEY_UNLIKELY(!j.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); } l.clear(); std::transform(j.rbegin(), j.rend(), @@ -146,11 +187,11 @@ void from_json(const BasicJsonType& j, std::forward_list& l) // valarray doesn't have an insert method template::value, int> = 0> -void from_json(const BasicJsonType& j, std::valarray& l) +inline void from_json(const BasicJsonType& j, std::valarray& l) { if (JSON_HEDLEY_UNLIKELY(!j.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); } l.resize(j.size()); std::transform(j.begin(), j.end(), std::begin(l), @@ -161,7 +202,7 @@ void from_json(const BasicJsonType& j, std::valarray& l) } template -auto from_json(const BasicJsonType& j, T (&arr)[N]) +auto from_json(const BasicJsonType& j, T (&arr)[N]) // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) -> decltype(j.template get(), void()) { for (std::size_t i = 0; i < N; ++i) @@ -170,8 +211,56 @@ auto from_json(const BasicJsonType& j, T (&arr)[N]) } } +template +auto from_json(const BasicJsonType& j, T (&arr)[N1][N2]) // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) +-> decltype(j.template get(), void()) +{ + for (std::size_t i1 = 0; i1 < N1; ++i1) + { + for (std::size_t i2 = 0; i2 < N2; ++i2) + { + arr[i1][i2] = j.at(i1).at(i2).template get(); + } + } +} + +template +auto from_json(const BasicJsonType& j, T (&arr)[N1][N2][N3]) // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) +-> decltype(j.template get(), void()) +{ + for (std::size_t i1 = 0; i1 < N1; ++i1) + { + for (std::size_t i2 = 0; i2 < N2; ++i2) + { + for (std::size_t i3 = 0; i3 < N3; ++i3) + { + arr[i1][i2][i3] = j.at(i1).at(i2).at(i3).template get(); + } + } + } +} + +template +auto from_json(const BasicJsonType& j, T (&arr)[N1][N2][N3][N4]) // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) +-> decltype(j.template get(), void()) +{ + for (std::size_t i1 = 0; i1 < N1; ++i1) + { + for (std::size_t i2 = 0; i2 < N2; ++i2) + { + for (std::size_t i3 = 0; i3 < N3; ++i3) + { + for (std::size_t i4 = 0; i4 < N4; ++i4) + { + arr[i1][i2][i3][i4] = j.at(i1).at(i2).at(i3).at(i4).template get(); + } + } + } + } +} + template -void from_json_array_impl(const BasicJsonType& j, typename BasicJsonType::array_t& arr, priority_tag<3> /*unused*/) +inline void from_json_array_impl(const BasicJsonType& j, typename BasicJsonType::array_t& arr, priority_tag<3> /*unused*/) { arr = *j.template get_ptr(); } @@ -187,7 +276,10 @@ auto from_json_array_impl(const BasicJsonType& j, std::array& arr, } } -template +template::value, + int> = 0> auto from_json_array_impl(const BasicJsonType& j, ConstructibleArrayType& arr, priority_tag<1> /*unused*/) -> decltype( arr.reserve(std::declval()), @@ -208,9 +300,12 @@ auto from_json_array_impl(const BasicJsonType& j, ConstructibleArrayType& arr, p arr = std::move(ret); } -template -void from_json_array_impl(const BasicJsonType& j, ConstructibleArrayType& arr, - priority_tag<0> /*unused*/) +template::value, + int> = 0> +inline void from_json_array_impl(const BasicJsonType& j, ConstructibleArrayType& arr, + priority_tag<0> /*unused*/) { using std::end; @@ -241,19 +336,37 @@ void()) { if (JSON_HEDLEY_UNLIKELY(!j.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + - std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); } from_json_array_impl(j, arr, priority_tag<3> {}); } +template < typename BasicJsonType, typename T, std::size_t... Idx > +std::array from_json_inplace_array_impl(BasicJsonType&& j, + identity_tag> /*unused*/, index_sequence /*unused*/) +{ + return { { std::forward(j).at(Idx).template get()... } }; +} + +template < typename BasicJsonType, typename T, std::size_t N > +auto from_json(BasicJsonType&& j, identity_tag> tag) +-> decltype(from_json_inplace_array_impl(std::forward(j), tag, make_index_sequence {})) +{ + if (JSON_HEDLEY_UNLIKELY(!j.is_array())) + { + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); + } + + return from_json_inplace_array_impl(std::forward(j), tag, make_index_sequence {}); +} + template -void from_json(const BasicJsonType& j, typename BasicJsonType::binary_t& bin) +inline void from_json(const BasicJsonType& j, typename BasicJsonType::binary_t& bin) { if (JSON_HEDLEY_UNLIKELY(!j.is_binary())) { - JSON_THROW(type_error::create(302, "type must be binary, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be binary, but is ", j.type_name()), &j)); } bin = *j.template get_ptr(); @@ -261,15 +374,15 @@ void from_json(const BasicJsonType& j, typename BasicJsonType::binary_t& bin) template::value, int> = 0> -void from_json(const BasicJsonType& j, ConstructibleObjectType& obj) +inline void from_json(const BasicJsonType& j, ConstructibleObjectType& obj) { if (JSON_HEDLEY_UNLIKELY(!j.is_object())) { - JSON_THROW(type_error::create(302, "type must be object, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be object, but is ", j.type_name()), &j)); } ConstructibleObjectType ret; - auto inner_object = j.template get_ptr(); + const auto* inner_object = j.template get_ptr(); using value_type = typename ConstructibleObjectType::value_type; std::transform( inner_object->begin(), inner_object->end(), @@ -293,7 +406,7 @@ template < typename BasicJsonType, typename ArithmeticType, !std::is_same::value&& !std::is_same::value, int > = 0 > -void from_json(const BasicJsonType& j, ArithmeticType& val) +inline void from_json(const BasicJsonType& j, ArithmeticType& val) { switch (static_cast(j)) { @@ -318,44 +431,81 @@ void from_json(const BasicJsonType& j, ArithmeticType& val) break; } + case value_t::null: + case value_t::object: + case value_t::array: + case value_t::string: + case value_t::binary: + case value_t::discarded: default: - JSON_THROW(type_error::create(302, "type must be number, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be number, but is ", j.type_name()), &j)); } } +template +std::tuple from_json_tuple_impl_base(BasicJsonType&& j, index_sequence /*unused*/) +{ + return std::make_tuple(std::forward(j).at(Idx).template get()...); +} + +template +std::tuple<> from_json_tuple_impl_base(BasicJsonType& /*unused*/, index_sequence<> /*unused*/) +{ + return {}; +} + +template < typename BasicJsonType, class A1, class A2 > +std::pair from_json_tuple_impl(BasicJsonType&& j, identity_tag> /*unused*/, priority_tag<0> /*unused*/) +{ + return {std::forward(j).at(0).template get(), + std::forward(j).at(1).template get()}; +} + template -void from_json(const BasicJsonType& j, std::pair& p) +inline void from_json_tuple_impl(BasicJsonType&& j, std::pair& p, priority_tag<1> /*unused*/) { - p = {j.at(0).template get(), j.at(1).template get()}; + p = from_json_tuple_impl(std::forward(j), identity_tag> {}, priority_tag<0> {}); } -template -void from_json_tuple_impl(const BasicJsonType& j, Tuple& t, index_sequence /*unused*/) +template +std::tuple from_json_tuple_impl(BasicJsonType&& j, identity_tag> /*unused*/, priority_tag<2> /*unused*/) { - t = std::make_tuple(j.at(Idx).template get::type>()...); + return from_json_tuple_impl_base(std::forward(j), index_sequence_for {}); } template -void from_json(const BasicJsonType& j, std::tuple& t) +inline void from_json_tuple_impl(BasicJsonType&& j, std::tuple& t, priority_tag<3> /*unused*/) { - from_json_tuple_impl(j, t, index_sequence_for {}); + t = from_json_tuple_impl_base(std::forward(j), index_sequence_for {}); +} + +template +auto from_json(BasicJsonType&& j, TupleRelated&& t) +-> decltype(from_json_tuple_impl(std::forward(j), std::forward(t), priority_tag<3> {})) +{ + if (JSON_HEDLEY_UNLIKELY(!j.is_array())) + { + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); + } + + return from_json_tuple_impl(std::forward(j), std::forward(t), priority_tag<3> {}); } template < typename BasicJsonType, typename Key, typename Value, typename Compare, typename Allocator, typename = enable_if_t < !std::is_constructible < typename BasicJsonType::string_t, Key >::value >> -void from_json(const BasicJsonType& j, std::map& m) +inline void from_json(const BasicJsonType& j, std::map& m) { if (JSON_HEDLEY_UNLIKELY(!j.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); } m.clear(); for (const auto& p : j) { if (JSON_HEDLEY_UNLIKELY(!p.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + std::string(p.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", p.type_name()), &j)); } m.emplace(p.at(0).template get(), p.at(1).template get()); } @@ -364,40 +514,64 @@ void from_json(const BasicJsonType& j, std::map& template < typename BasicJsonType, typename Key, typename Value, typename Hash, typename KeyEqual, typename Allocator, typename = enable_if_t < !std::is_constructible < typename BasicJsonType::string_t, Key >::value >> -void from_json(const BasicJsonType& j, std::unordered_map& m) +inline void from_json(const BasicJsonType& j, std::unordered_map& m) { if (JSON_HEDLEY_UNLIKELY(!j.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + std::string(j.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", j.type_name()), &j)); } m.clear(); for (const auto& p : j) { if (JSON_HEDLEY_UNLIKELY(!p.is_array())) { - JSON_THROW(type_error::create(302, "type must be array, but is " + std::string(p.type_name()))); + JSON_THROW(type_error::create(302, concat("type must be array, but is ", p.type_name()), &j)); } m.emplace(p.at(0).template get(), p.at(1).template get()); } } +#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM +template +inline void from_json(const BasicJsonType& j, std_fs::path& p) +{ + if (JSON_HEDLEY_UNLIKELY(!j.is_string())) + { + JSON_THROW(type_error::create(302, concat("type must be string, but is ", j.type_name()), &j)); + } + const auto& s = *j.template get_ptr(); +#ifdef JSON_HAS_CPP_20 + p = std_fs::path(std::u8string_view(reinterpret_cast(s.data()), s.size())); +#else + p = std_fs::u8path(s); // accepts UTF-8 encoded std::string in C++17, deprecated in C++20 +#endif +} +#endif + struct from_json_fn { template - auto operator()(const BasicJsonType& j, T& val) const - noexcept(noexcept(from_json(j, val))) - -> decltype(from_json(j, val), void()) + auto operator()(const BasicJsonType& j, T&& val) const + noexcept(noexcept(from_json(j, std::forward(val)))) + -> decltype(from_json(j, std::forward(val))) { - return from_json(j, val); + return from_json(j, std::forward(val)); } }; + } // namespace detail +#ifndef JSON_HAS_CPP_17 /// namespace to hold default `from_json` function /// to see why this is required: /// http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4381.html -namespace +namespace // NOLINT(cert-dcl59-cpp,fuchsia-header-anon-namespaces,google-build-namespaces) { -constexpr const auto& from_json = detail::static_const::value; -} // namespace -}} // namespace nlohmann::vt +#endif +JSON_INLINE_VARIABLE constexpr const auto& from_json = // NOLINT(misc-definitions-in-headers) + detail::static_const::value; +#ifndef JSON_HAS_CPP_17 +} // namespace +#endif + +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/conversions/to_chars.hpp b/lib/json/include/nlohmann-vt/detail/conversions/to_chars.hpp index 42e868ff51..9fd5c74bf8 100644 --- a/lib/json/include/nlohmann-vt/detail/conversions/to_chars.hpp +++ b/lib/json/include/nlohmann-vt/detail/conversions/to_chars.hpp @@ -1,3 +1,12 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2009 Florian Loitsch +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // array @@ -9,8 +18,7 @@ #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { @@ -200,7 +208,7 @@ boundaries compute_boundaries(FloatType value) using bits_type = typename std::conditional::type; - const std::uint64_t bits = reinterpret_bits(value); + const auto bits = static_cast(reinterpret_bits(value)); const std::uint64_t E = bits >> (kPrecision - 1); const std::uint64_t F = bits & (kHiddenBit - 1); @@ -231,10 +239,10 @@ boundaries compute_boundaries(FloatType value) // v- m- v m+ v+ const bool lower_boundary_is_closer = F == 0 && E > 1; - const diyfp m_plus = diyfp(2 * v.f + 1, v.e - 1); + const diyfp m_plus = diyfp((2 * v.f) + 1, v.e - 1); const diyfp m_minus = lower_boundary_is_closer - ? diyfp(4 * v.f - 1, v.e - 2) // (B) - : diyfp(2 * v.f - 1, v.e - 1); // (A) + ? diyfp((4 * v.f) - 1, v.e - 2) // (B) + : diyfp((2 * v.f) - 1, v.e - 1); // (A) // Determine the normalized w+ = m+. const diyfp w_plus = diyfp::normalize(m_plus); @@ -464,7 +472,7 @@ inline cached_power get_cached_power_for_binary_exponent(int e) JSON_ASSERT(e >= -1500); JSON_ASSERT(e <= 1500); const int f = kAlpha - e - 1; - const int k = (f * 78913) / (1 << 18) + static_cast(f > 0); + const int k = ((f * 78913) / (1 << 18)) + static_cast(f > 0); const int index = (-kCachedPowersMinDecExp + k + (kCachedPowersDecStep - 1)) / kCachedPowersDecStep; JSON_ASSERT(index >= 0); @@ -490,51 +498,49 @@ inline int find_largest_pow10(const std::uint32_t n, std::uint32_t& pow10) return 10; } // LCOV_EXCL_STOP - else if (n >= 100000000) + if (n >= 100000000) { pow10 = 100000000; return 9; } - else if (n >= 10000000) + if (n >= 10000000) { pow10 = 10000000; return 8; } - else if (n >= 1000000) + if (n >= 1000000) { pow10 = 1000000; return 7; } - else if (n >= 100000) + if (n >= 100000) { pow10 = 100000; return 6; } - else if (n >= 10000) + if (n >= 10000) { pow10 = 10000; return 5; } - else if (n >= 1000) + if (n >= 1000) { pow10 = 1000; return 4; } - else if (n >= 100) + if (n >= 100) { pow10 = 100; return 3; } - else if (n >= 10) + if (n >= 10) { pow10 = 10; return 2; } - else - { - pow10 = 1; - return 1; - } + + pow10 = 1; + return 1; } inline void grisu2_round(char* buf, int len, std::uint64_t dist, std::uint64_t delta, @@ -620,7 +626,7 @@ inline void grisu2_digit_gen(char* buffer, int& length, int& decimal_exponent, JSON_ASSERT(p1 > 0); - std::uint32_t pow10; + std::uint32_t pow10{}; const int k = find_largest_pow10(p1, pow10); // 10^(k-1) <= p1 < 10^k, pow10 = 10^(k-1) @@ -893,7 +899,7 @@ void grisu2(char* buf, int& len, int& decimal_exponent, FloatType value) // // The documentation for 'std::to_chars' (https://en.cppreference.com/w/cpp/utility/to_chars) // says "value is converted to a string as if by std::sprintf in the default ("C") locale" - // and since sprintf promotes float's to double's, I think this is exactly what 'std::to_chars' + // and since sprintf promotes floats to doubles, I think this is exactly what 'std::to_chars' // does. // On the other hand, the documentation for 'std::to_chars' requires that "parsing the // representation using the corresponding std::from_chars function recovers value exactly". That @@ -903,7 +909,7 @@ void grisu2(char* buf, int& len, int& decimal_exponent, FloatType value) // NB: If the neighbors are computed for single-precision numbers, there is a single float // (7.0385307e-26f) which can't be recovered using strtod. The resulting double precision // value is off by 1 ulp. -#if 0 +#if 0 // NOLINT(readability-avoid-unconditional-preprocessor-if) const boundaries w = compute_boundaries(static_cast(value)); #else const boundaries w = compute_boundaries(value); @@ -944,15 +950,15 @@ inline char* append_exponent(char* buf, int e) } else if (k < 100) { - *buf++ = static_cast('0' + k / 10); + *buf++ = static_cast('0' + (k / 10)); k %= 10; *buf++ = static_cast('0' + k); } else { - *buf++ = static_cast('0' + k / 100); + *buf++ = static_cast('0' + (k / 100)); k %= 100; - *buf++ = static_cast('0' + k / 10); + *buf++ = static_cast('0' + (k / 10)); k %= 10; *buf++ = static_cast('0' + k); } @@ -1041,7 +1047,7 @@ inline char* format_buffer(char* buf, int len, int decimal_exponent, return append_exponent(buf, n - 1); } -} // namespace dtoa_impl +} // namespace dtoa_impl /*! @brief generates a decimal representation of the floating-point number value in [first, last). @@ -1068,6 +1074,10 @@ char* to_chars(char* first, const char* last, FloatType value) *first++ = '-'; } +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wfloat-equal" +#endif if (value == 0) // +-0 { *first++ = '0'; @@ -1076,6 +1086,9 @@ char* to_chars(char* first, const char* last, FloatType value) *first++ = '0'; return first; } +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif JSON_ASSERT(last - first >= std::numeric_limits::max_digits10); @@ -1101,5 +1114,5 @@ char* to_chars(char* first, const char* last, FloatType value) return dtoa_impl::format_buffer(first, len, decimal_exponent, kMinExp, kMaxExp); } -} // namespace detail -}} // namespace nlohmann::vt +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/conversions/to_json.hpp b/lib/json/include/nlohmann-vt/detail/conversions/to_json.hpp index c01c1b03bd..8537c6496a 100644 --- a/lib/json/include/nlohmann-vt/detail/conversions/to_json.hpp +++ b/lib/json/include/nlohmann-vt/detail/conversions/to_json.hpp @@ -1,5 +1,18 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once +#include // JSON_HAS_CPP_17 +#ifdef JSON_HAS_CPP_17 + #include // optional +#endif + #include // copy #include // begin, end #include // string @@ -11,17 +24,25 @@ #include #include +#include #include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + ////////////////// // constructors // ////////////////// +/* + * Note all external_constructor<>::construct functions need to call + * j.m_data.m_value.destroy(j.m_data.m_type) to avoid a memory leak in case j contains an + * allocated value (e.g., a string). See bug issue + * https://github.com/nlohmann/json/issues/2865 for more information. + */ + template struct external_constructor; template<> @@ -30,8 +51,9 @@ struct external_constructor template static void construct(BasicJsonType& j, typename BasicJsonType::boolean_t b) noexcept { - j.m_type = value_t::boolean; - j.m_value = b; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::boolean; + j.m_data.m_value = b; j.assert_invariant(); } }; @@ -42,16 +64,18 @@ struct external_constructor template static void construct(BasicJsonType& j, const typename BasicJsonType::string_t& s) { - j.m_type = value_t::string; - j.m_value = s; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::string; + j.m_data.m_value = s; j.assert_invariant(); } template static void construct(BasicJsonType& j, typename BasicJsonType::string_t&& s) { - j.m_type = value_t::string; - j.m_value = std::move(s); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::string; + j.m_data.m_value = std::move(s); j.assert_invariant(); } @@ -60,8 +84,9 @@ struct external_constructor int > = 0 > static void construct(BasicJsonType& j, const CompatibleStringType& str) { - j.m_type = value_t::string; - j.m_value.string = j.template create(str); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::string; + j.m_data.m_value.string = j.template create(str); j.assert_invariant(); } }; @@ -72,18 +97,18 @@ struct external_constructor template static void construct(BasicJsonType& j, const typename BasicJsonType::binary_t& b) { - j.m_type = value_t::binary; - typename BasicJsonType::binary_t value{b}; - j.m_value = value; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::binary; + j.m_data.m_value = typename BasicJsonType::binary_t(b); j.assert_invariant(); } template static void construct(BasicJsonType& j, typename BasicJsonType::binary_t&& b) { - j.m_type = value_t::binary; - typename BasicJsonType::binary_t value{std::move(b)}; - j.m_value = value; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::binary; + j.m_data.m_value = typename BasicJsonType::binary_t(std::move(b)); j.assert_invariant(); } }; @@ -94,8 +119,9 @@ struct external_constructor template static void construct(BasicJsonType& j, typename BasicJsonType::number_float_t val) noexcept { - j.m_type = value_t::number_float; - j.m_value = val; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::number_float; + j.m_data.m_value = val; j.assert_invariant(); } }; @@ -106,8 +132,9 @@ struct external_constructor template static void construct(BasicJsonType& j, typename BasicJsonType::number_unsigned_t val) noexcept { - j.m_type = value_t::number_unsigned; - j.m_value = val; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::number_unsigned; + j.m_data.m_value = val; j.assert_invariant(); } }; @@ -118,8 +145,9 @@ struct external_constructor template static void construct(BasicJsonType& j, typename BasicJsonType::number_integer_t val) noexcept { - j.m_type = value_t::number_integer; - j.m_value = val; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::number_integer; + j.m_data.m_value = val; j.assert_invariant(); } }; @@ -130,16 +158,20 @@ struct external_constructor template static void construct(BasicJsonType& j, const typename BasicJsonType::array_t& arr) { - j.m_type = value_t::array; - j.m_value = arr; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::array; + j.m_data.m_value = arr; + j.set_parents(); j.assert_invariant(); } template static void construct(BasicJsonType& j, typename BasicJsonType::array_t&& arr) { - j.m_type = value_t::array; - j.m_value = std::move(arr); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::array; + j.m_data.m_value = std::move(arr); + j.set_parents(); j.assert_invariant(); } @@ -150,20 +182,25 @@ struct external_constructor { using std::begin; using std::end; - j.m_type = value_t::array; - j.m_value.array = j.template create(begin(arr), end(arr)); + + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::array; + j.m_data.m_value.array = j.template create(begin(arr), end(arr)); + j.set_parents(); j.assert_invariant(); } template static void construct(BasicJsonType& j, const std::vector& arr) { - j.m_type = value_t::array; - j.m_value = value_t::array; - j.m_value.array->reserve(arr.size()); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::array; + j.m_data.m_value = value_t::array; + j.m_data.m_value.array->reserve(arr.size()); for (const bool x : arr) { - j.m_value.array->push_back(x); + j.m_data.m_value.array->push_back(x); + j.set_parent(j.m_data.m_value.array->back()); } j.assert_invariant(); } @@ -172,13 +209,15 @@ struct external_constructor enable_if_t::value, int> = 0> static void construct(BasicJsonType& j, const std::valarray& arr) { - j.m_type = value_t::array; - j.m_value = value_t::array; - j.m_value.array->resize(arr.size()); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::array; + j.m_data.m_value = value_t::array; + j.m_data.m_value.array->resize(arr.size()); if (arr.size() > 0) { - std::copy(std::begin(arr), std::end(arr), j.m_value.array->begin()); + std::copy(std::begin(arr), std::end(arr), j.m_data.m_value.array->begin()); } + j.set_parents(); j.assert_invariant(); } }; @@ -189,16 +228,20 @@ struct external_constructor template static void construct(BasicJsonType& j, const typename BasicJsonType::object_t& obj) { - j.m_type = value_t::object; - j.m_value = obj; + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::object; + j.m_data.m_value = obj; + j.set_parents(); j.assert_invariant(); } template static void construct(BasicJsonType& j, typename BasicJsonType::object_t&& obj) { - j.m_type = value_t::object; - j.m_value = std::move(obj); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::object; + j.m_data.m_value = std::move(obj); + j.set_parents(); j.assert_invariant(); } @@ -209,8 +252,10 @@ struct external_constructor using std::begin; using std::end; - j.m_type = value_t::object; - j.m_value.object = j.template create(begin(obj), end(obj)); + j.m_data.m_value.destroy(j.m_data.m_type); + j.m_data.m_type = value_t::object; + j.m_data.m_value.object = j.template create(begin(obj), end(obj)); + j.set_parents(); j.assert_invariant(); } }; @@ -219,57 +264,89 @@ struct external_constructor // to_json // ///////////// +#ifdef JSON_HAS_CPP_17 +template::value, int> = 0> +void to_json(BasicJsonType& j, const std::optional& opt) +{ + if (opt.has_value()) + { + j = *opt; + } + else + { + j = nullptr; + } +} +#endif + template::value, int> = 0> -void to_json(BasicJsonType& j, T b) noexcept +inline void to_json(BasicJsonType& j, T b) noexcept { external_constructor::construct(j, b); } +template < typename BasicJsonType, typename BoolRef, + enable_if_t < + ((std::is_same::reference, BoolRef>::value + && !std::is_same ::reference, typename BasicJsonType::boolean_t&>::value) + || (std::is_same::const_reference, BoolRef>::value + && !std::is_same ::const_reference>, + typename BasicJsonType::boolean_t >::value)) + && std::is_convertible::value, int > = 0 > +inline void to_json(BasicJsonType& j, const BoolRef& b) noexcept +{ + external_constructor::construct(j, static_cast(b)); +} + template::value, int> = 0> -void to_json(BasicJsonType& j, const CompatibleString& s) +inline void to_json(BasicJsonType& j, const CompatibleString& s) { external_constructor::construct(j, s); } template -void to_json(BasicJsonType& j, typename BasicJsonType::string_t&& s) +inline void to_json(BasicJsonType& j, typename BasicJsonType::string_t&& s) { external_constructor::construct(j, std::move(s)); } template::value, int> = 0> -void to_json(BasicJsonType& j, FloatType val) noexcept +inline void to_json(BasicJsonType& j, FloatType val) noexcept { external_constructor::construct(j, static_cast(val)); } template::value, int> = 0> -void to_json(BasicJsonType& j, CompatibleNumberUnsignedType val) noexcept +inline void to_json(BasicJsonType& j, CompatibleNumberUnsignedType val) noexcept { external_constructor::construct(j, static_cast(val)); } template::value, int> = 0> -void to_json(BasicJsonType& j, CompatibleNumberIntegerType val) noexcept +inline void to_json(BasicJsonType& j, CompatibleNumberIntegerType val) noexcept { external_constructor::construct(j, static_cast(val)); } +#if !JSON_DISABLE_ENUM_SERIALIZATION template::value, int> = 0> -void to_json(BasicJsonType& j, EnumType e) noexcept +inline void to_json(BasicJsonType& j, EnumType e) noexcept { using underlying_type = typename std::underlying_type::type; - external_constructor::construct(j, static_cast(e)); + static constexpr value_t integral_value_t = std::is_unsigned::value ? value_t::number_unsigned : value_t::number_integer; + external_constructor::construct(j, static_cast(e)); } +#endif // JSON_DISABLE_ENUM_SERIALIZATION template -void to_json(BasicJsonType& j, const std::vector& e) +inline void to_json(BasicJsonType& j, const std::vector& e) { external_constructor::construct(j, e); } @@ -282,39 +359,39 @@ template < typename BasicJsonType, typename CompatibleArrayType, !std::is_same::value&& !is_basic_json::value, int > = 0 > -void to_json(BasicJsonType& j, const CompatibleArrayType& arr) +inline void to_json(BasicJsonType& j, const CompatibleArrayType& arr) { external_constructor::construct(j, arr); } template -void to_json(BasicJsonType& j, const typename BasicJsonType::binary_t& bin) +inline void to_json(BasicJsonType& j, const typename BasicJsonType::binary_t& bin) { external_constructor::construct(j, bin); } template::value, int> = 0> -void to_json(BasicJsonType& j, const std::valarray& arr) +inline void to_json(BasicJsonType& j, const std::valarray& arr) { external_constructor::construct(j, std::move(arr)); } template -void to_json(BasicJsonType& j, typename BasicJsonType::array_t&& arr) +inline void to_json(BasicJsonType& j, typename BasicJsonType::array_t&& arr) { external_constructor::construct(j, std::move(arr)); } template < typename BasicJsonType, typename CompatibleObjectType, enable_if_t < is_compatible_object_type::value&& !is_basic_json::value, int > = 0 > -void to_json(BasicJsonType& j, const CompatibleObjectType& obj) +inline void to_json(BasicJsonType& j, const CompatibleObjectType& obj) { external_constructor::construct(j, obj); } template -void to_json(BasicJsonType& j, typename BasicJsonType::object_t&& obj) +inline void to_json(BasicJsonType& j, typename BasicJsonType::object_t&& obj) { external_constructor::construct(j, std::move(obj)); } @@ -322,15 +399,15 @@ void to_json(BasicJsonType& j, typename BasicJsonType::object_t&& obj) template < typename BasicJsonType, typename T, std::size_t N, enable_if_t < !std::is_constructible::value, + const T(&)[N]>::value, // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) int > = 0 > -void to_json(BasicJsonType& j, const T(&arr)[N]) +inline void to_json(BasicJsonType& j, const T(&arr)[N]) // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) { external_constructor::construct(j, arr); } template < typename BasicJsonType, typename T1, typename T2, enable_if_t < std::is_constructible::value&& std::is_constructible::value, int > = 0 > -void to_json(BasicJsonType& j, const std::pair& p) +inline void to_json(BasicJsonType& j, const std::pair& p) { j = { p.first, p.second }; } @@ -338,23 +415,43 @@ void to_json(BasicJsonType& j, const std::pair& p) // for https://github.com/nlohmann/json/pull/1134 template>::value, int> = 0> -void to_json(BasicJsonType& j, const T& b) +inline void to_json(BasicJsonType& j, const T& b) { j = { {b.key(), b.value()} }; } template -void to_json_tuple_impl(BasicJsonType& j, const Tuple& t, index_sequence /*unused*/) +inline void to_json_tuple_impl(BasicJsonType& j, const Tuple& t, index_sequence /*unused*/) { j = { std::get(t)... }; } +template +inline void to_json_tuple_impl(BasicJsonType& j, const Tuple& /*unused*/, index_sequence<> /*unused*/) +{ + using array_t = typename BasicJsonType::array_t; + j = array_t(); +} + template::value, int > = 0> -void to_json(BasicJsonType& j, const T& t) +inline void to_json(BasicJsonType& j, const T& t) { to_json_tuple_impl(j, t, make_index_sequence::value> {}); } +#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM +template +inline void to_json(BasicJsonType& j, const std_fs::path& p) +{ +#ifdef JSON_HAS_CPP_20 + const std::u8string s = p.u8string(); + j = std::string(s.begin(), s.end()); +#else + j = p.u8string(); // returns std::string in C++17 +#endif +} +#endif + struct to_json_fn { template @@ -366,9 +463,17 @@ struct to_json_fn }; } // namespace detail +#ifndef JSON_HAS_CPP_17 /// namespace to hold default `to_json` function -namespace +/// to see why this is required: +/// http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4381.html +namespace // NOLINT(cert-dcl59-cpp,fuchsia-header-anon-namespaces,google-build-namespaces) { -constexpr const auto& to_json = detail::static_const::value; -} // namespace -}} // namespace nlohmann::vt +#endif +JSON_INLINE_VARIABLE constexpr const auto& to_json = // NOLINT(misc-definitions-in-headers) + detail::static_const::value; +#ifndef JSON_HAS_CPP_17 +} // namespace +#endif + +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/exceptions.hpp b/lib/json/include/nlohmann-vt/detail/exceptions.hpp index 94079011f8..b8309b5be4 100644 --- a/lib/json/include/nlohmann-vt/detail/exceptions.hpp +++ b/lib/json/include/nlohmann-vt/detail/exceptions.hpp @@ -1,120 +1,168 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once +#include // nullptr_t #include // exception +#if JSON_DIAGNOSTICS + #include // accumulate +#endif #include // runtime_error #include // to_string +#include // vector +#include +#include #include #include - -namespace nlohmann { inline namespace vt -{ +#include +#include +#include + +// With -Wweak-vtables, Clang will complain about the exception classes as they +// have no out-of-line virtual method definitions and their vtable will be +// emitted in every translation unit. This issue cannot be fixed with a +// header-only library as there is no implementation file to move these +// functions to. As a result, we suppress this warning here to avoid client +// code to stumble over this. See https://github.com/nlohmann/json/issues/4087 +// for a discussion. +#if defined(__clang__) + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wweak-vtables" +#endif + +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + //////////////// // exceptions // //////////////// -/*! -@brief general exception of the @ref basic_json class - -This class is an extension of `std::exception` objects with a member @a id for -exception ids. It is used as the base class for all exceptions thrown by the -@ref basic_json class. This class can hence be used as "wildcard" to catch -exceptions. - -Subclasses: -- @ref parse_error for exceptions indicating a parse error -- @ref invalid_iterator for exceptions indicating errors with iterators -- @ref type_error for exceptions indicating executing a member function with - a wrong type -- @ref out_of_range for exceptions indicating access out of the defined range -- @ref other_error for exceptions indicating other library errors - -@internal -@note To have nothrow-copy-constructible exceptions, we internally use - `std::runtime_error` which can cope with arbitrary-length error messages. - Intermediate strings are built with static functions and then passed to - the actual constructor. -@endinternal - -@liveexample{The following code shows how arbitrary library exceptions can be -caught.,exception} - -@since version 3.0.0 -*/ +/// @brief general exception of the @ref basic_json class +/// @sa https://json.nlohmann.me/api/basic_json/exception/ class exception : public std::exception { public: /// returns the explanatory string - JSON_HEDLEY_RETURNS_NON_NULL const char* what() const noexcept override { return m.what(); } /// the id of the exception - const int id; + const int id; // NOLINT(cppcoreguidelines-non-private-member-variables-in-classes) protected: JSON_HEDLEY_NON_NULL(3) - exception(int id_, const char* what_arg) : id(id_), m(what_arg) {} + exception(int id_, const char* what_arg) : id(id_), m(what_arg) {} // NOLINT(bugprone-throw-keyword-missing) static std::string name(const std::string& ename, int id_) { - return "[json.exception." + ename + "." + std::to_string(id_) + "] "; + return concat("[json.exception.", ename, '.', std::to_string(id_), "] "); + } + + static std::string diagnostics(std::nullptr_t /*leaf_element*/) + { + return ""; + } + + template + static std::string diagnostics(const BasicJsonType* leaf_element) + { +#if JSON_DIAGNOSTICS + std::vector tokens; + for (const auto* current = leaf_element; current != nullptr && current->m_parent != nullptr; current = current->m_parent) + { + switch (current->m_parent->type()) + { + case value_t::array: + { + for (std::size_t i = 0; i < current->m_parent->m_data.m_value.array->size(); ++i) + { + if (¤t->m_parent->m_data.m_value.array->operator[](i) == current) + { + tokens.emplace_back(std::to_string(i)); + break; + } + } + break; + } + + case value_t::object: + { + for (const auto& element : *current->m_parent->m_data.m_value.object) + { + if (&element.second == current) + { + tokens.emplace_back(element.first.c_str()); + break; + } + } + break; + } + + case value_t::null: // LCOV_EXCL_LINE + case value_t::string: // LCOV_EXCL_LINE + case value_t::boolean: // LCOV_EXCL_LINE + case value_t::number_integer: // LCOV_EXCL_LINE + case value_t::number_unsigned: // LCOV_EXCL_LINE + case value_t::number_float: // LCOV_EXCL_LINE + case value_t::binary: // LCOV_EXCL_LINE + case value_t::discarded: // LCOV_EXCL_LINE + default: // LCOV_EXCL_LINE + break; // LCOV_EXCL_LINE + } + } + + if (tokens.empty()) + { + return ""; + } + + auto str = std::accumulate(tokens.rbegin(), tokens.rend(), std::string{}, + [](const std::string & a, const std::string & b) + { + return concat(a, '/', detail::escape(b)); + }); + + return concat('(', str, ") ", get_byte_positions(leaf_element)); +#else + return get_byte_positions(leaf_element); +#endif } private: /// an exception object as storage for error messages std::runtime_error m; +#if JSON_DIAGNOSTIC_POSITIONS + template + static std::string get_byte_positions(const BasicJsonType* leaf_element) + { + if ((leaf_element->start_pos() != std::string::npos) && (leaf_element->end_pos() != std::string::npos)) + { + return concat("(bytes ", std::to_string(leaf_element->start_pos()), "-", std::to_string(leaf_element->end_pos()), ") "); + } + return ""; + } +#else + template + static std::string get_byte_positions(const BasicJsonType* leaf_element) + { + static_cast(leaf_element); + return ""; + } +#endif }; -/*! -@brief exception indicating a parse error - -This exception is thrown by the library when a parse error occurs. Parse errors -can occur during the deserialization of JSON text, CBOR, MessagePack, as well -as when using JSON Patch. - -Member @a byte holds the byte index of the last read character in the input -file. - -Exceptions have ids 1xx. - -name / id | example message | description ------------------------------- | --------------- | ------------------------- -json.exception.parse_error.101 | parse error at 2: unexpected end of input; expected string literal | This error indicates a syntax error while deserializing a JSON text. The error message describes that an unexpected token (character) was encountered, and the member @a byte indicates the error position. -json.exception.parse_error.102 | parse error at 14: missing or wrong low surrogate | JSON uses the `\uxxxx` format to describe Unicode characters. Code points above above 0xFFFF are split into two `\uxxxx` entries ("surrogate pairs"). This error indicates that the surrogate pair is incomplete or contains an invalid code point. -json.exception.parse_error.103 | parse error: code points above 0x10FFFF are invalid | Unicode supports code points up to 0x10FFFF. Code points above 0x10FFFF are invalid. -json.exception.parse_error.104 | parse error: JSON patch must be an array of objects | [RFC 6902](https://tools.ietf.org/html/rfc6902) requires a JSON Patch document to be a JSON document that represents an array of objects. -json.exception.parse_error.105 | parse error: operation must have string member 'op' | An operation of a JSON Patch document must contain exactly one "op" member, whose value indicates the operation to perform. Its value must be one of "add", "remove", "replace", "move", "copy", or "test"; other values are errors. -json.exception.parse_error.106 | parse error: array index '01' must not begin with '0' | An array index in a JSON Pointer ([RFC 6901](https://tools.ietf.org/html/rfc6901)) may be `0` or any number without a leading `0`. -json.exception.parse_error.107 | parse error: JSON pointer must be empty or begin with '/' - was: 'foo' | A JSON Pointer must be a Unicode string containing a sequence of zero or more reference tokens, each prefixed by a `/` character. -json.exception.parse_error.108 | parse error: escape character '~' must be followed with '0' or '1' | In a JSON Pointer, only `~0` and `~1` are valid escape sequences. -json.exception.parse_error.109 | parse error: array index 'one' is not a number | A JSON Pointer array index must be a number. -json.exception.parse_error.110 | parse error at 1: cannot read 2 bytes from vector | When parsing CBOR or MessagePack, the byte vector ends before the complete value has been read. -json.exception.parse_error.112 | parse error at 1: error reading CBOR; last byte: 0xF8 | Not all types of CBOR or MessagePack are supported. This exception occurs if an unsupported byte was read. -json.exception.parse_error.113 | parse error at 2: expected a CBOR string; last byte: 0x98 | While parsing a map key, a value that is not a string has been read. -json.exception.parse_error.114 | parse error: Unsupported BSON record type 0x0F | The parsing of the corresponding BSON record type is not implemented (yet). -json.exception.parse_error.115 | parse error at byte 5: syntax error while parsing UBJSON high-precision number: invalid number text: 1A | A UBJSON high-precision number could not be parsed. - -@note For an input with n bytes, 1 is the index of the first character and n+1 - is the index of the terminating null byte or the end of file. This also - holds true when reading a byte vector (CBOR or MessagePack). - -@liveexample{The following code shows how a `parse_error` exception can be -caught.,parse_error} - -@sa - @ref exception for the base class of the library exceptions -@sa - @ref invalid_iterator for exceptions indicating errors with iterators -@sa - @ref type_error for exceptions indicating executing a member function with - a wrong type -@sa - @ref out_of_range for exceptions indicating access out of the defined range -@sa - @ref other_error for exceptions indicating other library errors - -@since version 3.0.0 -*/ +/// @brief exception indicating a parse error +/// @sa https://json.nlohmann.me/api/basic_json/parse_error/ class parse_error : public exception { public: @@ -127,19 +175,21 @@ class parse_error : public exception @param[in] what_arg the explanatory string @return parse_error object */ - static parse_error create(int id_, const position_t& pos, const std::string& what_arg) + template::value, int> = 0> + static parse_error create(int id_, const position_t& pos, const std::string& what_arg, BasicJsonContext context) { - std::string w = exception::name("parse_error", id_) + "parse error" + - position_string(pos) + ": " + what_arg; - return parse_error(id_, pos.chars_read_total, w.c_str()); + const std::string w = concat(exception::name("parse_error", id_), "parse error", + position_string(pos), ": ", exception::diagnostics(context), what_arg); + return {id_, pos.chars_read_total, w.c_str()}; } - static parse_error create(int id_, std::size_t byte_, const std::string& what_arg) + template::value, int> = 0> + static parse_error create(int id_, std::size_t byte_, const std::string& what_arg, BasicJsonContext context) { - std::string w = exception::name("parse_error", id_) + "parse error" + - (byte_ != 0 ? (" at byte " + std::to_string(byte_)) : "") + - ": " + what_arg; - return parse_error(id_, byte_, w.c_str()); + const std::string w = concat(exception::name("parse_error", id_), "parse error", + (byte_ != 0 ? (concat(" at byte ", std::to_string(byte_))) : ""), + ": ", exception::diagnostics(context), what_arg); + return {id_, byte_, w.c_str()}; } /*! @@ -159,55 +209,21 @@ class parse_error : public exception static std::string position_string(const position_t& pos) { - return " at line " + std::to_string(pos.lines_read + 1) + - ", column " + std::to_string(pos.chars_read_current_line); + return concat(" at line ", std::to_string(pos.lines_read + 1), + ", column ", std::to_string(pos.chars_read_current_line)); } }; -/*! -@brief exception indicating errors with iterators - -This exception is thrown if iterators passed to a library function do not match -the expected semantics. - -Exceptions have ids 2xx. - -name / id | example message | description ------------------------------------ | --------------- | ------------------------- -json.exception.invalid_iterator.201 | iterators are not compatible | The iterators passed to constructor @ref basic_json(InputIT first, InputIT last) are not compatible, meaning they do not belong to the same container. Therefore, the range (@a first, @a last) is invalid. -json.exception.invalid_iterator.202 | iterator does not fit current value | In an erase or insert function, the passed iterator @a pos does not belong to the JSON value for which the function was called. It hence does not define a valid position for the deletion/insertion. -json.exception.invalid_iterator.203 | iterators do not fit current value | Either iterator passed to function @ref erase(IteratorType first, IteratorType last) does not belong to the JSON value from which values shall be erased. It hence does not define a valid range to delete values from. -json.exception.invalid_iterator.204 | iterators out of range | When an iterator range for a primitive type (number, boolean, or string) is passed to a constructor or an erase function, this range has to be exactly (@ref begin(), @ref end()), because this is the only way the single stored value is expressed. All other ranges are invalid. -json.exception.invalid_iterator.205 | iterator out of range | When an iterator for a primitive type (number, boolean, or string) is passed to an erase function, the iterator has to be the @ref begin() iterator, because it is the only way to address the stored value. All other iterators are invalid. -json.exception.invalid_iterator.206 | cannot construct with iterators from null | The iterators passed to constructor @ref basic_json(InputIT first, InputIT last) belong to a JSON null value and hence to not define a valid range. -json.exception.invalid_iterator.207 | cannot use key() for non-object iterators | The key() member function can only be used on iterators belonging to a JSON object, because other types do not have a concept of a key. -json.exception.invalid_iterator.208 | cannot use operator[] for object iterators | The operator[] to specify a concrete offset cannot be used on iterators belonging to a JSON object, because JSON objects are unordered. -json.exception.invalid_iterator.209 | cannot use offsets with object iterators | The offset operators (+, -, +=, -=) cannot be used on iterators belonging to a JSON object, because JSON objects are unordered. -json.exception.invalid_iterator.210 | iterators do not fit | The iterator range passed to the insert function are not compatible, meaning they do not belong to the same container. Therefore, the range (@a first, @a last) is invalid. -json.exception.invalid_iterator.211 | passed iterators may not belong to container | The iterator range passed to the insert function must not be a subrange of the container to insert to. -json.exception.invalid_iterator.212 | cannot compare iterators of different containers | When two iterators are compared, they must belong to the same container. -json.exception.invalid_iterator.213 | cannot compare order of object iterators | The order of object iterators cannot be compared, because JSON objects are unordered. -json.exception.invalid_iterator.214 | cannot get value | Cannot get value for iterator: Either the iterator belongs to a null value or it is an iterator to a primitive type (number, boolean, or string), but the iterator is different to @ref begin(). - -@liveexample{The following code shows how an `invalid_iterator` exception can be -caught.,invalid_iterator} - -@sa - @ref exception for the base class of the library exceptions -@sa - @ref parse_error for exceptions indicating a parse error -@sa - @ref type_error for exceptions indicating executing a member function with - a wrong type -@sa - @ref out_of_range for exceptions indicating access out of the defined range -@sa - @ref other_error for exceptions indicating other library errors - -@since version 3.0.0 -*/ +/// @brief exception indicating errors with iterators +/// @sa https://json.nlohmann.me/api/basic_json/invalid_iterator/ class invalid_iterator : public exception { public: - static invalid_iterator create(int id_, const std::string& what_arg) + template::value, int> = 0> + static invalid_iterator create(int id_, const std::string& what_arg, BasicJsonContext context) { - std::string w = exception::name("invalid_iterator", id_) + what_arg; - return invalid_iterator(id_, w.c_str()); + const std::string w = concat(exception::name("invalid_iterator", id_), exception::diagnostics(context), what_arg); + return {id_, w.c_str()}; } private: @@ -216,52 +232,16 @@ class invalid_iterator : public exception : exception(id_, what_arg) {} }; -/*! -@brief exception indicating executing a member function with a wrong type - -This exception is thrown in case of a type error; that is, a library function is -executed on a JSON value whose type does not match the expected semantics. - -Exceptions have ids 3xx. - -name / id | example message | description ------------------------------ | --------------- | ------------------------- -json.exception.type_error.301 | cannot create object from initializer list | To create an object from an initializer list, the initializer list must consist only of a list of pairs whose first element is a string. When this constraint is violated, an array is created instead. -json.exception.type_error.302 | type must be object, but is array | During implicit or explicit value conversion, the JSON type must be compatible to the target type. For instance, a JSON string can only be converted into string types, but not into numbers or boolean types. -json.exception.type_error.303 | incompatible ReferenceType for get_ref, actual type is object | To retrieve a reference to a value stored in a @ref basic_json object with @ref get_ref, the type of the reference must match the value type. For instance, for a JSON array, the @a ReferenceType must be @ref array_t &. -json.exception.type_error.304 | cannot use at() with string | The @ref at() member functions can only be executed for certain JSON types. -json.exception.type_error.305 | cannot use operator[] with string | The @ref operator[] member functions can only be executed for certain JSON types. -json.exception.type_error.306 | cannot use value() with string | The @ref value() member functions can only be executed for certain JSON types. -json.exception.type_error.307 | cannot use erase() with string | The @ref erase() member functions can only be executed for certain JSON types. -json.exception.type_error.308 | cannot use push_back() with string | The @ref push_back() and @ref operator+= member functions can only be executed for certain JSON types. -json.exception.type_error.309 | cannot use insert() with | The @ref insert() member functions can only be executed for certain JSON types. -json.exception.type_error.310 | cannot use swap() with number | The @ref swap() member functions can only be executed for certain JSON types. -json.exception.type_error.311 | cannot use emplace_back() with string | The @ref emplace_back() member function can only be executed for certain JSON types. -json.exception.type_error.312 | cannot use update() with string | The @ref update() member functions can only be executed for certain JSON types. -json.exception.type_error.313 | invalid value to unflatten | The @ref unflatten function converts an object whose keys are JSON Pointers back into an arbitrary nested JSON value. The JSON Pointers must not overlap, because then the resulting value would not be well defined. -json.exception.type_error.314 | only objects can be unflattened | The @ref unflatten function only works for an object whose keys are JSON Pointers. -json.exception.type_error.315 | values in object must be primitive | The @ref unflatten function only works for an object whose keys are JSON Pointers and whose values are primitive. -json.exception.type_error.316 | invalid UTF-8 byte at index 10: 0x7E | The @ref dump function only works with UTF-8 encoded strings; that is, if you assign a `std::string` to a JSON value, make sure it is UTF-8 encoded. | -json.exception.type_error.317 | JSON value cannot be serialized to requested format | The dynamic type of the object cannot be represented in the requested serialization format (e.g. a raw `true` or `null` JSON object cannot be serialized to BSON) | - -@liveexample{The following code shows how a `type_error` exception can be -caught.,type_error} - -@sa - @ref exception for the base class of the library exceptions -@sa - @ref parse_error for exceptions indicating a parse error -@sa - @ref invalid_iterator for exceptions indicating errors with iterators -@sa - @ref out_of_range for exceptions indicating access out of the defined range -@sa - @ref other_error for exceptions indicating other library errors - -@since version 3.0.0 -*/ +/// @brief exception indicating executing a member function with a wrong type +/// @sa https://json.nlohmann.me/api/basic_json/type_error/ class type_error : public exception { public: - static type_error create(int id_, const std::string& what_arg) + template::value, int> = 0> + static type_error create(int id_, const std::string& what_arg, BasicJsonContext context) { - std::string w = exception::name("type_error", id_) + what_arg; - return type_error(id_, w.c_str()); + const std::string w = concat(exception::name("type_error", id_), exception::diagnostics(context), what_arg); + return {id_, w.c_str()}; } private: @@ -269,46 +249,16 @@ class type_error : public exception type_error(int id_, const char* what_arg) : exception(id_, what_arg) {} }; -/*! -@brief exception indicating access out of the defined range - -This exception is thrown in case a library function is called on an input -parameter that exceeds the expected range, for instance in case of array -indices or nonexisting object keys. - -Exceptions have ids 4xx. - -name / id | example message | description -------------------------------- | --------------- | ------------------------- -json.exception.out_of_range.401 | array index 3 is out of range | The provided array index @a i is larger than @a size-1. -json.exception.out_of_range.402 | array index '-' (3) is out of range | The special array index `-` in a JSON Pointer never describes a valid element of the array, but the index past the end. That is, it can only be used to add elements at this position, but not to read it. -json.exception.out_of_range.403 | key 'foo' not found | The provided key was not found in the JSON object. -json.exception.out_of_range.404 | unresolved reference token 'foo' | A reference token in a JSON Pointer could not be resolved. -json.exception.out_of_range.405 | JSON pointer has no parent | The JSON Patch operations 'remove' and 'add' can not be applied to the root element of the JSON value. -json.exception.out_of_range.406 | number overflow parsing '10E1000' | A parsed number could not be stored as without changing it to NaN or INF. -json.exception.out_of_range.407 | number overflow serializing '9223372036854775808' | UBJSON and BSON only support integer numbers up to 9223372036854775807. (until version 3.8.0) | -json.exception.out_of_range.408 | excessive array size: 8658170730974374167 | The size (following `#`) of an UBJSON array or object exceeds the maximal capacity. | -json.exception.out_of_range.409 | BSON key cannot contain code point U+0000 (at byte 2) | Key identifiers to be serialized to BSON cannot contain code point U+0000, since the key is stored as zero-terminated c-string | - -@liveexample{The following code shows how an `out_of_range` exception can be -caught.,out_of_range} - -@sa - @ref exception for the base class of the library exceptions -@sa - @ref parse_error for exceptions indicating a parse error -@sa - @ref invalid_iterator for exceptions indicating errors with iterators -@sa - @ref type_error for exceptions indicating executing a member function with - a wrong type -@sa - @ref other_error for exceptions indicating other library errors - -@since version 3.0.0 -*/ +/// @brief exception indicating access out of the defined range +/// @sa https://json.nlohmann.me/api/basic_json/out_of_range/ class out_of_range : public exception { public: - static out_of_range create(int id_, const std::string& what_arg) + template::value, int> = 0> + static out_of_range create(int id_, const std::string& what_arg, BasicJsonContext context) { - std::string w = exception::name("out_of_range", id_) + what_arg; - return out_of_range(id_, w.c_str()); + const std::string w = concat(exception::name("out_of_range", id_), exception::diagnostics(context), what_arg); + return {id_, w.c_str()}; } private: @@ -316,42 +266,26 @@ class out_of_range : public exception out_of_range(int id_, const char* what_arg) : exception(id_, what_arg) {} }; -/*! -@brief exception indicating other library errors - -This exception is thrown in case of errors that cannot be classified with the -other exception types. - -Exceptions have ids 5xx. - -name / id | example message | description ------------------------------- | --------------- | ------------------------- -json.exception.other_error.501 | unsuccessful: {"op":"test","path":"/baz", "value":"bar"} | A JSON Patch operation 'test' failed. The unsuccessful operation is also printed. - -@sa - @ref exception for the base class of the library exceptions -@sa - @ref parse_error for exceptions indicating a parse error -@sa - @ref invalid_iterator for exceptions indicating errors with iterators -@sa - @ref type_error for exceptions indicating executing a member function with - a wrong type -@sa - @ref out_of_range for exceptions indicating access out of the defined range - -@liveexample{The following code shows how an `other_error` exception can be -caught.,other_error} - -@since version 3.0.0 -*/ +/// @brief exception indicating other library errors +/// @sa https://json.nlohmann.me/api/basic_json/other_error/ class other_error : public exception { public: - static other_error create(int id_, const std::string& what_arg) + template::value, int> = 0> + static other_error create(int id_, const std::string& what_arg, BasicJsonContext context) { - std::string w = exception::name("other_error", id_) + what_arg; - return other_error(id_, w.c_str()); + const std::string w = concat(exception::name("other_error", id_), exception::diagnostics(context), what_arg); + return {id_, w.c_str()}; } private: JSON_HEDLEY_NON_NULL(3) other_error(int id_, const char* what_arg) : exception(id_, what_arg) {} }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END + +#if defined(__clang__) + #pragma clang diagnostic pop +#endif diff --git a/lib/json/include/nlohmann-vt/detail/hash.hpp b/lib/json/include/nlohmann-vt/detail/hash.hpp index a7011fe445..59de95b49e 100644 --- a/lib/json/include/nlohmann-vt/detail/hash.hpp +++ b/lib/json/include/nlohmann-vt/detail/hash.hpp @@ -1,10 +1,21 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once -#include // size_t, uint8_t +#include // uint8_t +#include // size_t #include // hash -namespace nlohmann { inline namespace vt -{ +#include +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { @@ -83,24 +94,24 @@ std::size_t hash(const BasicJsonType& j) return combine(type, h); } - case nlohmann::detail::value_t::number_unsigned: + case BasicJsonType::value_t::number_unsigned: { const auto h = std::hash {}(j.template get()); return combine(type, h); } - case nlohmann::detail::value_t::number_float: + case BasicJsonType::value_t::number_float: { const auto h = std::hash {}(j.template get()); return combine(type, h); } - case nlohmann::detail::value_t::binary: + case BasicJsonType::value_t::binary: { auto seed = combine(type, j.get_binary().size()); const auto h = std::hash {}(j.get_binary().has_subtype()); seed = combine(seed, h); - seed = combine(seed, j.get_binary().subtype()); + seed = combine(seed, static_cast(j.get_binary().subtype())); for (const auto byte : j.get_binary()) { seed = combine(seed, std::hash {}(byte)); @@ -108,12 +119,11 @@ std::size_t hash(const BasicJsonType& j) return seed; } - default: // LCOV_EXCL_LINE - JSON_ASSERT(false); // LCOV_EXCL_LINE + default: // LCOV_EXCL_LINE + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE + return 0; // LCOV_EXCL_LINE } - - return 0; } } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/input/binary_reader.hpp b/lib/json/include/nlohmann-vt/detail/input/binary_reader.hpp index 72eb198fdf..75ebaa8799 100644 --- a/lib/json/include/nlohmann-vt/detail/input/binary_reader.hpp +++ b/lib/json/include/nlohmann-vt/detail/input/binary_reader.hpp @@ -1,3 +1,11 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // generate_n @@ -11,6 +19,10 @@ #include // numeric_limits #include // char_traits, string #include // make_pair, move +#include // vector +#ifdef __cpp_lib_byteswap + #include //byteswap +#endif #include #include @@ -18,18 +30,20 @@ #include #include #include +#include +#include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { /// how to treat CBOR tags enum class cbor_tag_handler_t { - error, ///< throw a parse_error exception in case of a tag - ignore ///< ignore tags + error, ///< throw a parse_error exception in case of a tag + ignore, ///< ignore tags + store ///< store tags as binary type }; /*! @@ -39,12 +53,11 @@ enum class cbor_tag_handler_t @note from https://stackoverflow.com/a/1001328/266378 */ -static inline bool little_endianess(int num = 1) noexcept +static inline bool little_endianness(int num = 1) noexcept { return *reinterpret_cast(&num) == 1; } - /////////////////// // binary reader // /////////////////// @@ -52,7 +65,7 @@ static inline bool little_endianess(int num = 1) noexcept /*! @brief deserialization of CBOR, MessagePack, and UBJSON values */ -template> +template> class binary_reader { using number_integer_t = typename BasicJsonType::number_integer_t; @@ -62,7 +75,7 @@ class binary_reader using binary_t = typename BasicJsonType::binary_t; using json_sax_t = SAX; using char_type = typename InputAdapterType::char_type; - using char_int_type = typename std::char_traits::int_type; + using char_int_type = typename char_traits::int_type; public: /*! @@ -70,16 +83,16 @@ class binary_reader @param[in] adapter input adapter to read from */ - explicit binary_reader(InputAdapterType&& adapter) : ia(std::move(adapter)) + explicit binary_reader(InputAdapterType&& adapter, const input_format_t format = input_format_t::json) noexcept : ia(std::move(adapter)), input_format(format) { (void)detail::is_sax_static_asserts {}; } // make class move-only binary_reader(const binary_reader&) = delete; - binary_reader(binary_reader&&) = default; + binary_reader(binary_reader&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) binary_reader& operator=(const binary_reader&) = delete; - binary_reader& operator=(binary_reader&&) = default; + binary_reader& operator=(binary_reader&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) ~binary_reader() = default; /*! @@ -88,7 +101,7 @@ class binary_reader @param[in] strict whether to expect the input to be consumed completed @param[in] tag_handler how to treat CBOR tags - @return + @return whether parsing was successful */ JSON_HEDLEY_NON_NULL(3) bool sax_parse(const input_format_t format, @@ -114,17 +127,19 @@ class binary_reader break; case input_format_t::ubjson: + case input_format_t::bjdata: result = parse_ubjson_internal(); break; + case input_format_t::json: // LCOV_EXCL_LINE default: // LCOV_EXCL_LINE - JSON_ASSERT(false); // LCOV_EXCL_LINE + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE } // strict mode: next byte must be EOF if (result && strict) { - if (format == input_format_t::ubjson) + if (input_format == input_format_t::ubjson || input_format == input_format_t::bjdata) { get_ignore_noop(); } @@ -133,10 +148,10 @@ class binary_reader get(); } - if (JSON_HEDLEY_UNLIKELY(current != std::char_traits::eof())) + if (JSON_HEDLEY_UNLIKELY(current != char_traits::eof())) { - return sax->parse_error(chars_read, get_token_string(), - parse_error::create(110, chars_read, exception_message(format, "expected end of input; last byte: 0x" + get_token_string(), "value"))); + return sax->parse_error(chars_read, get_token_string(), parse_error::create(110, chars_read, + exception_message(input_format, concat("expected end of input; last byte: 0x", get_token_string()), "value"), nullptr)); } } @@ -157,7 +172,7 @@ class binary_reader std::int32_t document_size{}; get_number(input_format_t::bson, document_size); - if (JSON_HEDLEY_UNLIKELY(!sax->start_object(std::size_t(-1)))) + if (JSON_HEDLEY_UNLIKELY(!sax->start_object(detail::unknown_size()))) { return false; } @@ -172,7 +187,7 @@ class binary_reader /*! @brief Parses a C-style string from the BSON input. - @param[in, out] result A reference to the string variable where the read + @param[in,out] result A reference to the string variable where the read string is to be stored. @return `true` if the \x00-byte indicating the end of the string was encountered before the EOF; false` indicates an unexpected EOF. @@ -200,7 +215,7 @@ class binary_reader input. @param[in] len The length (including the zero-byte at the end) of the string to be read. - @param[in, out] result A reference to the string variable where the read + @param[in,out] result A reference to the string variable where the read string is to be stored. @tparam NumberType The type of the length @a len @pre len >= 1 @@ -212,16 +227,17 @@ class binary_reader if (JSON_HEDLEY_UNLIKELY(len < 1)) { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::bson, "string length must be at least 1, is " + std::to_string(len), "string"))); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format_t::bson, concat("string length must be at least 1, is ", std::to_string(len)), "string"), nullptr)); } - return get_string(input_format_t::bson, len - static_cast(1), result) && get() != std::char_traits::eof(); + return get_string(input_format_t::bson, len - static_cast(1), result) && get() != char_traits::eof(); } /*! @brief Parses a byte array input of length @a len from the BSON input. @param[in] len The length of the byte array to be read. - @param[in, out] result A reference to the binary variable where the read + @param[in,out] result A reference to the binary variable where the read array is to be stored. @tparam NumberType The type of the length @a len @pre len >= 0 @@ -233,7 +249,8 @@ class binary_reader if (JSON_HEDLEY_UNLIKELY(len < 0)) { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::bson, "byte array length cannot be negative, is " + std::to_string(len), "binary"))); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format_t::bson, concat("byte array length cannot be negative, is ", std::to_string(len)), "binary"), nullptr)); } // All BSON binary values have a subtype @@ -311,11 +328,19 @@ class binary_reader return get_number(input_format_t::bson, value) && sax->number_integer(value); } + case 0x11: // uint64 + { + std::uint64_t value{}; + return get_number(input_format_t::bson, value) && sax->number_unsigned(value); + } + default: // anything else not supported (yet) { std::array cr{{}}; - (std::snprintf)(cr.data(), cr.size(), "%.2hhX", static_cast(element_type)); - return sax->parse_error(element_type_parse_position, std::string(cr.data()), parse_error::create(114, element_type_parse_position, "Unsupported BSON record type 0x" + std::string(cr.data()))); + static_cast((std::snprintf)(cr.data(), cr.size(), "%.2hhX", static_cast(element_type))); // NOLINT(cppcoreguidelines-pro-type-vararg,hicpp-vararg) + const std::string cr_str{cr.data()}; + return sax->parse_error(element_type_parse_position, cr_str, + parse_error::create(114, element_type_parse_position, concat("Unsupported BSON record type 0x", cr_str), nullptr)); } } } @@ -375,7 +400,7 @@ class binary_reader std::int32_t document_size{}; get_number(input_format_t::bson, document_size); - if (JSON_HEDLEY_UNLIKELY(!sax->start_array(std::size_t(-1)))) + if (JSON_HEDLEY_UNLIKELY(!sax->start_array(detail::unknown_size()))) { return false; } @@ -406,7 +431,7 @@ class binary_reader switch (get_char ? get() : current) { // EOF - case std::char_traits::eof(): + case char_traits::eof(): return unexpect_eof(input_format_t::cbor, "value"); // Integer 0x00..0x17 (0..23) @@ -607,7 +632,8 @@ class binary_reader case 0x95: case 0x96: case 0x97: - return get_cbor_array(static_cast(static_cast(current) & 0x1Fu), tag_handler); + return get_cbor_array( + conditional_static_cast(static_cast(current) & 0x1Fu), tag_handler); case 0x98: // array (one-byte uint8_t for n follows) { @@ -624,17 +650,17 @@ class binary_reader case 0x9A: // array (four-byte uint32_t for n follow) { std::uint32_t len{}; - return get_number(input_format_t::cbor, len) && get_cbor_array(static_cast(len), tag_handler); + return get_number(input_format_t::cbor, len) && get_cbor_array(conditional_static_cast(len), tag_handler); } case 0x9B: // array (eight-byte uint64_t for n follow) { std::uint64_t len{}; - return get_number(input_format_t::cbor, len) && get_cbor_array(static_cast(len), tag_handler); + return get_number(input_format_t::cbor, len) && get_cbor_array(conditional_static_cast(len), tag_handler); } case 0x9F: // array (indefinite length) - return get_cbor_array(std::size_t(-1), tag_handler); + return get_cbor_array(detail::unknown_size(), tag_handler); // map (0x00..0x17 pairs of data items follow) case 0xA0: @@ -661,7 +687,7 @@ class binary_reader case 0xB5: case 0xB6: case 0xB7: - return get_cbor_object(static_cast(static_cast(current) & 0x1Fu), tag_handler); + return get_cbor_object(conditional_static_cast(static_cast(current) & 0x1Fu), tag_handler); case 0xB8: // map (one-byte uint8_t for n follows) { @@ -678,17 +704,17 @@ class binary_reader case 0xBA: // map (four-byte uint32_t for n follow) { std::uint32_t len{}; - return get_number(input_format_t::cbor, len) && get_cbor_object(static_cast(len), tag_handler); + return get_number(input_format_t::cbor, len) && get_cbor_object(conditional_static_cast(len), tag_handler); } case 0xBB: // map (eight-byte uint64_t for n follow) { std::uint64_t len{}; - return get_number(input_format_t::cbor, len) && get_cbor_object(static_cast(len), tag_handler); + return get_number(input_format_t::cbor, len) && get_cbor_object(conditional_static_cast(len), tag_handler); } case 0xBF: // map (indefinite length) - return get_cbor_object(std::size_t(-1), tag_handler); + return get_cbor_object(detail::unknown_size(), tag_handler); case 0xC6: // tagged item case 0xC7: @@ -715,35 +741,37 @@ class binary_reader case cbor_tag_handler_t::error: { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::cbor, "invalid byte: 0x" + last_token, "value"))); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format_t::cbor, concat("invalid byte: 0x", last_token), "value"), nullptr)); } case cbor_tag_handler_t::ignore: { + // ignore binary subtype switch (current) { case 0xD8: { - std::uint8_t len{}; - get_number(input_format_t::cbor, len); + std::uint8_t subtype_to_ignore{}; + get_number(input_format_t::cbor, subtype_to_ignore); break; } case 0xD9: { - std::uint16_t len{}; - get_number(input_format_t::cbor, len); + std::uint16_t subtype_to_ignore{}; + get_number(input_format_t::cbor, subtype_to_ignore); break; } case 0xDA: { - std::uint32_t len{}; - get_number(input_format_t::cbor, len); + std::uint32_t subtype_to_ignore{}; + get_number(input_format_t::cbor, subtype_to_ignore); break; } case 0xDB: { - std::uint64_t len{}; - get_number(input_format_t::cbor, len); + std::uint64_t subtype_to_ignore{}; + get_number(input_format_t::cbor, subtype_to_ignore); break; } default: @@ -752,8 +780,50 @@ class binary_reader return parse_cbor_internal(true, tag_handler); } - default: // LCOV_EXCL_LINE - JSON_ASSERT(false); // LCOV_EXCL_LINE + case cbor_tag_handler_t::store: + { + binary_t b; + // use binary subtype and store in binary container + switch (current) + { + case 0xD8: + { + std::uint8_t subtype{}; + get_number(input_format_t::cbor, subtype); + b.set_subtype(detail::conditional_static_cast(subtype)); + break; + } + case 0xD9: + { + std::uint16_t subtype{}; + get_number(input_format_t::cbor, subtype); + b.set_subtype(detail::conditional_static_cast(subtype)); + break; + } + case 0xDA: + { + std::uint32_t subtype{}; + get_number(input_format_t::cbor, subtype); + b.set_subtype(detail::conditional_static_cast(subtype)); + break; + } + case 0xDB: + { + std::uint64_t subtype{}; + get_number(input_format_t::cbor, subtype); + b.set_subtype(detail::conditional_static_cast(subtype)); + break; + } + default: + return parse_cbor_internal(true, tag_handler); + } + get(); + return get_cbor_binary(b) && sax->binary(b); + } + + default: // LCOV_EXCL_LINE + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE + return false; // LCOV_EXCL_LINE } } @@ -829,7 +899,8 @@ class binary_reader default: // anything else (0xFF is handled inside the other types) { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::cbor, "invalid byte: 0x" + last_token, "value"))); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format_t::cbor, concat("invalid byte: 0x", last_token), "value"), nullptr)); } } } @@ -924,7 +995,8 @@ class binary_reader default: { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format_t::cbor, "expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0x" + last_token, "string"))); + return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, + exception_message(input_format_t::cbor, concat("expected length specification (0x60-0x7B) or indefinite string type (0x7F); last byte: 0x", last_token), "string"), nullptr)); } } } @@ -1023,13 +1095,14 @@ class binary_reader default: { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format_t::cbor, "expected length specification (0x40-0x5B) or indefinite binary array type (0x5F); last byte: 0x" + last_token, "binary"))); + return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, + exception_message(input_format_t::cbor, concat("expected length specification (0x40-0x5B) or indefinite binary array type (0x5F); last byte: 0x", last_token), "binary"), nullptr)); } } } /*! - @param[in] len the length of the array or std::size_t(-1) for an + @param[in] len the length of the array or detail::unknown_size() for an array of indefinite size @param[in] tag_handler how CBOR tags should be treated @return whether array creation completed @@ -1042,7 +1115,7 @@ class binary_reader return false; } - if (len != std::size_t(-1)) + if (len != detail::unknown_size()) { for (std::size_t i = 0; i < len; ++i) { @@ -1067,7 +1140,7 @@ class binary_reader } /*! - @param[in] len the length of the object or std::size_t(-1) for an + @param[in] len the length of the object or detail::unknown_size() for an object of indefinite size @param[in] tag_handler how CBOR tags should be treated @return whether object creation completed @@ -1080,38 +1153,41 @@ class binary_reader return false; } - string_t key; - if (len != std::size_t(-1)) + if (len != 0) { - for (std::size_t i = 0; i < len; ++i) + string_t key; + if (len != detail::unknown_size()) { - get(); - if (JSON_HEDLEY_UNLIKELY(!get_cbor_string(key) || !sax->key(key))) + for (std::size_t i = 0; i < len; ++i) { - return false; - } + get(); + if (JSON_HEDLEY_UNLIKELY(!get_cbor_string(key) || !sax->key(key))) + { + return false; + } - if (JSON_HEDLEY_UNLIKELY(!parse_cbor_internal(true, tag_handler))) - { - return false; + if (JSON_HEDLEY_UNLIKELY(!parse_cbor_internal(true, tag_handler))) + { + return false; + } + key.clear(); } - key.clear(); } - } - else - { - while (get() != 0xFF) + else { - if (JSON_HEDLEY_UNLIKELY(!get_cbor_string(key) || !sax->key(key))) + while (get() != 0xFF) { - return false; - } + if (JSON_HEDLEY_UNLIKELY(!get_cbor_string(key) || !sax->key(key))) + { + return false; + } - if (JSON_HEDLEY_UNLIKELY(!parse_cbor_internal(true, tag_handler))) - { - return false; + if (JSON_HEDLEY_UNLIKELY(!parse_cbor_internal(true, tag_handler))) + { + return false; + } + key.clear(); } - key.clear(); } } @@ -1130,7 +1206,7 @@ class binary_reader switch (get()) { // EOF - case std::char_traits::eof(): + case char_traits::eof(): return unexpect_eof(input_format_t::msgpack, "value"); // positive fixint @@ -1281,7 +1357,7 @@ class binary_reader case 0x8D: case 0x8E: case 0x8F: - return get_msgpack_object(static_cast(static_cast(current) & 0x0Fu)); + return get_msgpack_object(conditional_static_cast(static_cast(current) & 0x0Fu)); // fixarray case 0x90: @@ -1300,7 +1376,7 @@ class binary_reader case 0x9D: case 0x9E: case 0x9F: - return get_msgpack_array(static_cast(static_cast(current) & 0x0Fu)); + return get_msgpack_array(conditional_static_cast(static_cast(current) & 0x0Fu)); // fixstr case 0xA0: @@ -1437,7 +1513,7 @@ class binary_reader case 0xDD: // array 32 { std::uint32_t len{}; - return get_number(input_format_t::msgpack, len) && get_msgpack_array(static_cast(len)); + return get_number(input_format_t::msgpack, len) && get_msgpack_array(conditional_static_cast(len)); } case 0xDE: // map 16 @@ -1449,7 +1525,7 @@ class binary_reader case 0xDF: // map 32 { std::uint32_t len{}; - return get_number(input_format_t::msgpack, len) && get_msgpack_object(static_cast(len)); + return get_number(input_format_t::msgpack, len) && get_msgpack_object(conditional_static_cast(len)); } // negative fixint @@ -1490,7 +1566,8 @@ class binary_reader default: // anything else { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::msgpack, "invalid byte: 0x" + last_token, "value"))); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format_t::msgpack, concat("invalid byte: 0x", last_token), "value"), nullptr)); } } } @@ -1572,7 +1649,8 @@ class binary_reader default: { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format_t::msgpack, "expected length specification (0xA0-0xBF, 0xD9-0xDB); last byte: 0x" + last_token, "string"))); + return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, + exception_message(input_format_t::msgpack, concat("expected length specification (0xA0-0xBF, 0xD9-0xDB); last byte: 0x", last_token), "string"), nullptr)); } } } @@ -1783,7 +1861,7 @@ class binary_reader get(); // TODO(niels): may we ignore N here? } - if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::ubjson, "value"))) + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "value"))) { return false; } @@ -1793,51 +1871,162 @@ class binary_reader case 'U': { std::uint8_t len{}; - return get_number(input_format_t::ubjson, len) && get_string(input_format_t::ubjson, len, result); + return get_number(input_format, len) && get_string(input_format, len, result); } case 'i': { std::int8_t len{}; - return get_number(input_format_t::ubjson, len) && get_string(input_format_t::ubjson, len, result); + return get_number(input_format, len) && get_string(input_format, len, result); } case 'I': { std::int16_t len{}; - return get_number(input_format_t::ubjson, len) && get_string(input_format_t::ubjson, len, result); + return get_number(input_format, len) && get_string(input_format, len, result); } case 'l': { std::int32_t len{}; - return get_number(input_format_t::ubjson, len) && get_string(input_format_t::ubjson, len, result); + return get_number(input_format, len) && get_string(input_format, len, result); } case 'L': { std::int64_t len{}; - return get_number(input_format_t::ubjson, len) && get_string(input_format_t::ubjson, len, result); + return get_number(input_format, len) && get_string(input_format, len, result); + } + + case 'u': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint16_t len{}; + return get_number(input_format, len) && get_string(input_format, len, result); + } + + case 'm': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint32_t len{}; + return get_number(input_format, len) && get_string(input_format, len, result); + } + + case 'M': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint64_t len{}; + return get_number(input_format, len) && get_string(input_format, len, result); } default: - auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format_t::ubjson, "expected length type specification (U, i, I, l, L); last byte: 0x" + last_token, "string"))); + break; + } + auto last_token = get_token_string(); + std::string message; + + if (input_format != input_format_t::bjdata) + { + message = "expected length type specification (U, i, I, l, L); last byte: 0x" + last_token; + } + else + { + message = "expected length type specification (U, i, u, I, m, l, M, L); last byte: 0x" + last_token; } + return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format, message, "string"), nullptr)); + } + + /*! + @param[out] dim an integer vector storing the ND array dimensions + @return whether reading ND array size vector is successful + */ + bool get_ubjson_ndarray_size(std::vector& dim) + { + std::pair size_and_type; + size_t dimlen = 0; + bool no_ndarray = true; + + if (JSON_HEDLEY_UNLIKELY(!get_ubjson_size_type(size_and_type, no_ndarray))) + { + return false; + } + + if (size_and_type.first != npos) + { + if (size_and_type.second != 0) + { + if (size_and_type.second != 'N') + { + for (std::size_t i = 0; i < size_and_type.first; ++i) + { + if (JSON_HEDLEY_UNLIKELY(!get_ubjson_size_value(dimlen, no_ndarray, size_and_type.second))) + { + return false; + } + dim.push_back(dimlen); + } + } + } + else + { + for (std::size_t i = 0; i < size_and_type.first; ++i) + { + if (JSON_HEDLEY_UNLIKELY(!get_ubjson_size_value(dimlen, no_ndarray))) + { + return false; + } + dim.push_back(dimlen); + } + } + } + else + { + while (current != ']') + { + if (JSON_HEDLEY_UNLIKELY(!get_ubjson_size_value(dimlen, no_ndarray, current))) + { + return false; + } + dim.push_back(dimlen); + get_ignore_noop(); + } + } + return true; } /*! @param[out] result determined size + @param[in,out] is_ndarray for input, `true` means already inside an ndarray vector + or ndarray dimension is not allowed; `false` means ndarray + is allowed; for output, `true` means an ndarray is found; + is_ndarray can only return `true` when its initial value + is `false` + @param[in] prefix type marker if already read, otherwise set to 0 + @return whether size determination completed */ - bool get_ubjson_size_value(std::size_t& result) + bool get_ubjson_size_value(std::size_t& result, bool& is_ndarray, char_int_type prefix = 0) { - switch (get_ignore_noop()) + if (prefix == 0) + { + prefix = get_ignore_noop(); + } + + switch (prefix) { case 'U': { std::uint8_t number{}; - if (JSON_HEDLEY_UNLIKELY(!get_number(input_format_t::ubjson, number))) + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) { return false; } @@ -1848,21 +2037,31 @@ class binary_reader case 'i': { std::int8_t number{}; - if (JSON_HEDLEY_UNLIKELY(!get_number(input_format_t::ubjson, number))) + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) { return false; } - result = static_cast(number); + if (number < 0) + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(113, chars_read, + exception_message(input_format, "count in an optimized container must be positive", "size"), nullptr)); + } + result = static_cast(number); // NOLINT(bugprone-signed-char-misuse,cert-str34-c): number is not a char return true; } case 'I': { std::int16_t number{}; - if (JSON_HEDLEY_UNLIKELY(!get_number(input_format_t::ubjson, number))) + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) { return false; } + if (number < 0) + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(113, chars_read, + exception_message(input_format, "count in an optimized container must be positive", "size"), nullptr)); + } result = static_cast(number); return true; } @@ -1870,10 +2069,15 @@ class binary_reader case 'l': { std::int32_t number{}; - if (JSON_HEDLEY_UNLIKELY(!get_number(input_format_t::ubjson, number))) + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) { return false; } + if (number < 0) + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(113, chars_read, + exception_message(input_format, "count in an optimized container must be positive", "size"), nullptr)); + } result = static_cast(number); return true; } @@ -1881,20 +2085,145 @@ class binary_reader case 'L': { std::int64_t number{}; - if (JSON_HEDLEY_UNLIKELY(!get_number(input_format_t::ubjson, number))) + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) { return false; } + if (number < 0) + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(113, chars_read, + exception_message(input_format, "count in an optimized container must be positive", "size"), nullptr)); + } + if (!value_in_range_of(number)) + { + return sax->parse_error(chars_read, get_token_string(), out_of_range::create(408, + exception_message(input_format, "integer value overflow", "size"), nullptr)); + } result = static_cast(number); return true; } - default: + case 'u': { - auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format_t::ubjson, "expected length type specification (U, i, I, l, L) after '#'; last byte: 0x" + last_token, "size"))); + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint16_t number{}; + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) + { + return false; + } + result = static_cast(number); + return true; + } + + case 'm': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint32_t number{}; + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) + { + return false; + } + result = conditional_static_cast(number); + return true; + } + + case 'M': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint64_t number{}; + if (JSON_HEDLEY_UNLIKELY(!get_number(input_format, number))) + { + return false; + } + if (!value_in_range_of(number)) + { + return sax->parse_error(chars_read, get_token_string(), out_of_range::create(408, + exception_message(input_format, "integer value overflow", "size"), nullptr)); + } + result = detail::conditional_static_cast(number); + return true; + } + + case '[': + { + if (input_format != input_format_t::bjdata) + { + break; + } + if (is_ndarray) // ndarray dimensional vector can only contain integers, and can not embed another array + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(113, chars_read, exception_message(input_format, "ndarray dimensional vector is not allowed", "size"), nullptr)); + } + std::vector dim; + if (JSON_HEDLEY_UNLIKELY(!get_ubjson_ndarray_size(dim))) + { + return false; + } + if (dim.size() == 1 || (dim.size() == 2 && dim.at(0) == 1)) // return normal array size if 1D row vector + { + result = dim.at(dim.size() - 1); + return true; + } + if (!dim.empty()) // if ndarray, convert to an object in JData annotated array format + { + for (auto i : dim) // test if any dimension in an ndarray is 0, if so, return a 1D empty container + { + if ( i == 0 ) + { + result = 0; + return true; + } + } + + string_t key = "_ArraySize_"; + if (JSON_HEDLEY_UNLIKELY(!sax->start_object(3) || !sax->key(key) || !sax->start_array(dim.size()))) + { + return false; + } + result = 1; + for (auto i : dim) + { + result *= i; + if (result == 0 || result == npos) // because dim elements shall not have zeros, result = 0 means overflow happened; it also can't be npos as it is used to initialize size in get_ubjson_size_type() + { + return sax->parse_error(chars_read, get_token_string(), out_of_range::create(408, exception_message(input_format, "excessive ndarray size caused overflow", "size"), nullptr)); + } + if (JSON_HEDLEY_UNLIKELY(!sax->number_unsigned(static_cast(i)))) + { + return false; + } + } + is_ndarray = true; + return sax->end_array(); + } + result = 0; + return true; } + + default: + break; + } + auto last_token = get_token_string(); + std::string message; + + if (input_format != input_format_t::bjdata) + { + message = "expected length type specification (U, i, I, l, L) after '#'; last byte: 0x" + last_token; + } + else + { + message = "expected length type specification (U, i, u, I, m, l, M, L) after '#'; last byte: 0x" + last_token; } + return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format, message, "size"), nullptr)); } /*! @@ -1904,20 +2233,30 @@ class binary_reader for a more compact representation. @param[out] result pair of the size and the type + @param[in] inside_ndarray whether the parser is parsing an ND array dimensional vector @return whether pair creation completed */ - bool get_ubjson_size_type(std::pair& result) + bool get_ubjson_size_type(std::pair& result, bool inside_ndarray = false) { - result.first = string_t::npos; // size + result.first = npos; // size result.second = 0; // type + bool is_ndarray = false; get_ignore_noop(); if (current == '$') { result.second = get(); // must not ignore 'N', because 'N' maybe the type - if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::ubjson, "type"))) + if (input_format == input_format_t::bjdata + && JSON_HEDLEY_UNLIKELY(std::binary_search(bjd_optimized_type_markers.begin(), bjd_optimized_type_markers.end(), result.second))) + { + auto last_token = get_token_string(); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format, concat("marker 0x", last_token, " is not a permitted optimized array type"), "type"), nullptr)); + } + + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "type"))) { return false; } @@ -1925,20 +2264,37 @@ class binary_reader get_ignore_noop(); if (JSON_HEDLEY_UNLIKELY(current != '#')) { - if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::ubjson, "value"))) + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "value"))) { return false; } auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::ubjson, "expected '#' after type information; last byte: 0x" + last_token, "size"))); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format, concat("expected '#' after type information; last byte: 0x", last_token), "size"), nullptr)); } - return get_ubjson_size_value(result.first); + const bool is_error = get_ubjson_size_value(result.first, is_ndarray); + if (input_format == input_format_t::bjdata && is_ndarray) + { + if (inside_ndarray) + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(112, chars_read, + exception_message(input_format, "ndarray can not be recursive", "size"), nullptr)); + } + result.second |= (1 << 8); // use bit 8 to indicate ndarray, all UBJSON and BJData markers should be ASCII letters + } + return is_error; } if (current == '#') { - return get_ubjson_size_value(result.first); + const bool is_error = get_ubjson_size_value(result.first, is_ndarray); + if (input_format == input_format_t::bjdata && is_ndarray) + { + return sax->parse_error(chars_read, get_token_string(), parse_error::create(112, chars_read, + exception_message(input_format, "ndarray requires both type and size", "size"), nullptr)); + } + return is_error; } return true; @@ -1952,8 +2308,8 @@ class binary_reader { switch (prefix) { - case std::char_traits::eof(): // EOF - return unexpect_eof(input_format_t::ubjson, "value"); + case char_traits::eof(): // EOF + return unexpect_eof(input_format, "value"); case 'T': // true return sax->boolean(true); @@ -1963,46 +2319,138 @@ class binary_reader case 'Z': // null return sax->null(); + case 'B': // byte + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint8_t number{}; + return get_number(input_format, number) && sax->number_unsigned(number); + } + case 'U': { std::uint8_t number{}; - return get_number(input_format_t::ubjson, number) && sax->number_unsigned(number); + return get_number(input_format, number) && sax->number_unsigned(number); } case 'i': { std::int8_t number{}; - return get_number(input_format_t::ubjson, number) && sax->number_integer(number); + return get_number(input_format, number) && sax->number_integer(number); } case 'I': { std::int16_t number{}; - return get_number(input_format_t::ubjson, number) && sax->number_integer(number); + return get_number(input_format, number) && sax->number_integer(number); } case 'l': { std::int32_t number{}; - return get_number(input_format_t::ubjson, number) && sax->number_integer(number); + return get_number(input_format, number) && sax->number_integer(number); } case 'L': { std::int64_t number{}; - return get_number(input_format_t::ubjson, number) && sax->number_integer(number); + return get_number(input_format, number) && sax->number_integer(number); + } + + case 'u': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint16_t number{}; + return get_number(input_format, number) && sax->number_unsigned(number); + } + + case 'm': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint32_t number{}; + return get_number(input_format, number) && sax->number_unsigned(number); + } + + case 'M': + { + if (input_format != input_format_t::bjdata) + { + break; + } + std::uint64_t number{}; + return get_number(input_format, number) && sax->number_unsigned(number); + } + + case 'h': + { + if (input_format != input_format_t::bjdata) + { + break; + } + const auto byte1_raw = get(); + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "number"))) + { + return false; + } + const auto byte2_raw = get(); + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "number"))) + { + return false; + } + + const auto byte1 = static_cast(byte1_raw); + const auto byte2 = static_cast(byte2_raw); + + // code from RFC 7049, Appendix D, Figure 3: + // As half-precision floating-point numbers were only added + // to IEEE 754 in 2008, today's programming platforms often + // still only have limited support for them. It is very + // easy to include at least decoding support for them even + // without such support. An example of a small decoder for + // half-precision floating-point numbers in the C language + // is shown in Fig. 3. + const auto half = static_cast((byte2 << 8u) + byte1); + const double val = [&half] + { + const int exp = (half >> 10u) & 0x1Fu; + const unsigned int mant = half & 0x3FFu; + JSON_ASSERT(0 <= exp&& exp <= 32); + JSON_ASSERT(mant <= 1024); + switch (exp) + { + case 0: + return std::ldexp(mant, -24); + case 31: + return (mant == 0) + ? std::numeric_limits::infinity() + : std::numeric_limits::quiet_NaN(); + default: + return std::ldexp(mant + 1024, exp - 25); + } + }(); + return sax->number_float((half & 0x8000u) != 0 + ? static_cast(-val) + : static_cast(val), ""); } case 'd': { float number{}; - return get_number(input_format_t::ubjson, number) && sax->number_float(static_cast(number), ""); + return get_number(input_format, number) && sax->number_float(static_cast(number), ""); } case 'D': { double number{}; - return get_number(input_format_t::ubjson, number) && sax->number_float(static_cast(number), ""); + return get_number(input_format, number) && sax->number_float(static_cast(number), ""); } case 'H': @@ -2013,14 +2461,15 @@ class binary_reader case 'C': // char { get(); - if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::ubjson, "char"))) + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "char"))) { return false; } if (JSON_HEDLEY_UNLIKELY(current > 127)) { auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, exception_message(input_format_t::ubjson, "byte after 'C' must be in range 0x00..0x7F; last byte: 0x" + last_token, "char"))); + return sax->parse_error(chars_read, last_token, parse_error::create(113, chars_read, + exception_message(input_format, concat("byte after 'C' must be in range 0x00..0x7F; last byte: 0x", last_token), "char"), nullptr)); } string_t s(1, static_cast(current)); return sax->string(s); @@ -2039,11 +2488,10 @@ class binary_reader return get_ubjson_object(); default: // anything else - { - auto last_token = get_token_string(); - return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format_t::ubjson, "invalid byte: 0x" + last_token, "value"))); - } + break; } + auto last_token = get_token_string(); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, exception_message(input_format, "invalid byte: 0x" + last_token, "value"), nullptr)); } /*! @@ -2057,7 +2505,60 @@ class binary_reader return false; } - if (size_and_type.first != string_t::npos) + // if bit-8 of size_and_type.second is set to 1, encode bjdata ndarray as an object in JData annotated array format (https://github.com/NeuroJSON/jdata): + // {"_ArrayType_" : "typeid", "_ArraySize_" : [n1, n2, ...], "_ArrayData_" : [v1, v2, ...]} + + if (input_format == input_format_t::bjdata && size_and_type.first != npos && (size_and_type.second & (1 << 8)) != 0) + { + size_and_type.second &= ~(static_cast(1) << 8); // use bit 8 to indicate ndarray, here we remove the bit to restore the type marker + auto it = std::lower_bound(bjd_types_map.begin(), bjd_types_map.end(), size_and_type.second, [](const bjd_type & p, char_int_type t) + { + return p.first < t; + }); + string_t key = "_ArrayType_"; + if (JSON_HEDLEY_UNLIKELY(it == bjd_types_map.end() || it->first != size_and_type.second)) + { + auto last_token = get_token_string(); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format, "invalid byte: 0x" + last_token, "type"), nullptr)); + } + + string_t type = it->second; // sax->string() takes a reference + if (JSON_HEDLEY_UNLIKELY(!sax->key(key) || !sax->string(type))) + { + return false; + } + + if (size_and_type.second == 'C' || size_and_type.second == 'B') + { + size_and_type.second = 'U'; + } + + key = "_ArrayData_"; + if (JSON_HEDLEY_UNLIKELY(!sax->key(key) || !sax->start_array(size_and_type.first) )) + { + return false; + } + + for (std::size_t i = 0; i < size_and_type.first; ++i) + { + if (JSON_HEDLEY_UNLIKELY(!get_ubjson_value(size_and_type.second))) + { + return false; + } + } + + return (sax->end_array() && sax->end_object()); + } + + // If BJData type marker is 'B' decode as binary + if (input_format == input_format_t::bjdata && size_and_type.first != npos && size_and_type.second == 'B') + { + binary_t result; + return get_binary(input_format, size_and_type.first, result) && sax->binary(result); + } + + if (size_and_type.first != npos) { if (JSON_HEDLEY_UNLIKELY(!sax->start_array(size_and_type.first))) { @@ -2090,7 +2591,7 @@ class binary_reader } else { - if (JSON_HEDLEY_UNLIKELY(!sax->start_array(std::size_t(-1)))) + if (JSON_HEDLEY_UNLIKELY(!sax->start_array(detail::unknown_size()))) { return false; } @@ -2119,8 +2620,16 @@ class binary_reader return false; } + // do not accept ND-array size in objects in BJData + if (input_format == input_format_t::bjdata && size_and_type.first != npos && (size_and_type.second & (1 << 8)) != 0) + { + auto last_token = get_token_string(); + return sax->parse_error(chars_read, last_token, parse_error::create(112, chars_read, + exception_message(input_format, "BJData object does not support ND-array size in optimized format", "object"), nullptr)); + } + string_t key; - if (size_and_type.first != string_t::npos) + if (size_and_type.first != npos) { if (JSON_HEDLEY_UNLIKELY(!sax->start_object(size_and_type.first))) { @@ -2160,7 +2669,7 @@ class binary_reader } else { - if (JSON_HEDLEY_UNLIKELY(!sax->start_object(std::size_t(-1)))) + if (JSON_HEDLEY_UNLIKELY(!sax->start_object(detail::unknown_size()))) { return false; } @@ -2190,7 +2699,8 @@ class binary_reader { // get size of following number string std::size_t size{}; - auto res = get_ubjson_size_value(size); + bool no_ndarray = true; + auto res = get_ubjson_size_value(size, no_ndarray); if (JSON_HEDLEY_UNLIKELY(!res)) { return res; @@ -2201,7 +2711,7 @@ class binary_reader for (std::size_t i = 0; i < size; ++i) { get(); - if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format_t::ubjson, "number"))) + if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(input_format, "number"))) { return false; } @@ -2209,8 +2719,8 @@ class binary_reader } // parse number string - auto number_ia = detail::input_adapter(std::forward(number_vector)); - auto number_lexer = detail::lexer(std::move(number_ia), false); + using ia_type = decltype(detail::input_adapter(number_vector)); + auto number_lexer = detail::lexer(detail::input_adapter(number_vector), false); const auto result_number = number_lexer.scan(); const auto number_string = number_lexer.get_token_string(); const auto result_remainder = number_lexer.scan(); @@ -2219,7 +2729,8 @@ class binary_reader if (JSON_HEDLEY_UNLIKELY(result_remainder != token_type::end_of_input)) { - return sax->parse_error(chars_read, number_string, parse_error::create(115, chars_read, exception_message(input_format_t::ubjson, "invalid number text: " + number_lexer.get_token_string(), "high-precision number"))); + return sax->parse_error(chars_read, number_string, parse_error::create(115, chars_read, + exception_message(input_format, concat("invalid number text: ", number_lexer.get_token_string()), "high-precision number"), nullptr)); } switch (result_number) @@ -2230,8 +2741,23 @@ class binary_reader return sax->number_unsigned(number_lexer.get_number_unsigned()); case token_type::value_float: return sax->number_float(number_lexer.get_number_float(), std::move(number_string)); + case token_type::uninitialized: + case token_type::literal_true: + case token_type::literal_false: + case token_type::literal_null: + case token_type::value_string: + case token_type::begin_array: + case token_type::begin_object: + case token_type::end_array: + case token_type::end_object: + case token_type::name_separator: + case token_type::value_separator: + case token_type::parse_error: + case token_type::end_of_input: + case token_type::literal_or_value: default: - return sax->parse_error(chars_read, number_string, parse_error::create(115, chars_read, exception_message(input_format_t::ubjson, "invalid number text: " + number_lexer.get_token_string(), "high-precision number"))); + return sax->parse_error(chars_read, number_string, parse_error::create(115, chars_read, + exception_message(input_format, concat("invalid number text: ", number_lexer.get_token_string()), "high-precision number"), nullptr)); } } @@ -2244,7 +2770,7 @@ class binary_reader This function provides the interface to the used input adapter. It does not throw in case the input reached EOF, but returns a -'ve valued - `std::char_traits::eof()` in that case. + `char_traits::eof()` in that case. @return character read from the input */ @@ -2254,6 +2780,29 @@ class binary_reader return current = ia.get_character(); } + /*! + @brief get_to read into a primitive type + + This function provides the interface to the used input adapter. It does + not throw in case the input reached EOF, but returns false instead + + @return bool, whether the read was successful + */ + template + bool get_to(T& dest, const input_format_t format, const char* context) + { + auto new_chars_read = ia.get_elements(&dest); + chars_read += new_chars_read; + if (JSON_HEDLEY_UNLIKELY(new_chars_read < sizeof(T))) + { + // in case of failure, advance position by 1 to report failing location + ++chars_read; + sax->parse_error(chars_read, "", parse_error::create(110, chars_read, exception_message(format, "unexpected end of input", context), nullptr)); + return false; + } + return true; + } + /*! @return character read from the input after ignoring all 'N' entries */ @@ -2268,6 +2817,28 @@ class binary_reader return current; } + template + static void byte_swap(NumberType& number) + { + constexpr std::size_t sz = sizeof(number); +#ifdef __cpp_lib_byteswap + if constexpr (sz == 1) + { + return; + } + if constexpr(std::is_integral_v) + { + number = std::byteswap(number); + return; + } +#endif + auto* ptr = reinterpret_cast(&number); + for (std::size_t i = 0; i < sz / 2; ++i) + { + std::swap(ptr[i], ptr[sz - i - 1]); + } + } + /* @brief read a number from the input @@ -2277,36 +2848,25 @@ class binary_reader @return whether conversion completed - @note This function needs to respect the system's endianess, because + @note This function needs to respect the system's endianness, because bytes in CBOR, MessagePack, and UBJSON are stored in network order (big endian) and therefore need reordering on little endian systems. + On the other hand, BSON and BJData use little endian and should reorder + on big endian systems. */ template bool get_number(const input_format_t format, NumberType& result) { - // step 1: read input into array with system's byte order - std::array vec; - for (std::size_t i = 0; i < sizeof(NumberType); ++i) - { - get(); - if (JSON_HEDLEY_UNLIKELY(!unexpect_eof(format, "number"))) - { - return false; - } + // read in the original format - // reverse byte order prior to conversion if necessary - if (is_little_endian != InputIsLittleEndian) - { - vec[sizeof(NumberType) - i - 1] = static_cast(current); - } - else - { - vec[i] = static_cast(current); // LCOV_EXCL_LINE - } + if (JSON_HEDLEY_UNLIKELY(!get_to(result, format, "number"))) + { + return false; + } + if (is_little_endian != (InputIsLittleEndian || format == input_format_t::bjdata)) + { + byte_swap(result); } - - // step 2: convert array into number of type T and return - std::memcpy(&result, vec.data(), sizeof(NumberType)); return true; } @@ -2339,7 +2899,7 @@ class binary_reader break; } result.push_back(static_cast(current)); - }; + } return success; } @@ -2384,10 +2944,10 @@ class binary_reader JSON_HEDLEY_NON_NULL(3) bool unexpect_eof(const input_format_t format, const char* context) const { - if (JSON_HEDLEY_UNLIKELY(current == std::char_traits::eof())) + if (JSON_HEDLEY_UNLIKELY(current == char_traits::eof())) { return sax->parse_error(chars_read, "", - parse_error::create(110, chars_read, exception_message(format, "unexpected end of input", context))); + parse_error::create(110, chars_read, exception_message(format, "unexpected end of input", context), nullptr)); } return true; } @@ -2398,7 +2958,7 @@ class binary_reader std::string get_token_string() const { std::array cr{{}}; - (std::snprintf)(cr.data(), cr.size(), "%.2hhX", static_cast(current)); + static_cast((std::snprintf)(cr.data(), cr.size(), "%.2hhX", static_cast(current))); // NOLINT(cppcoreguidelines-pro-type-vararg,hicpp-vararg) return std::string{cr.data()}; } @@ -2432,28 +2992,77 @@ class binary_reader error_msg += "BSON"; break; + case input_format_t::bjdata: + error_msg += "BJData"; + break; + + case input_format_t::json: // LCOV_EXCL_LINE default: // LCOV_EXCL_LINE - JSON_ASSERT(false); // LCOV_EXCL_LINE + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE } - return error_msg + " " + context + ": " + detail; + return concat(error_msg, ' ', context, ": ", detail); } private: + static JSON_INLINE_VARIABLE constexpr std::size_t npos = detail::unknown_size(); + /// input adapter InputAdapterType ia; /// the current character - char_int_type current = std::char_traits::eof(); + char_int_type current = char_traits::eof(); /// the number of characters read std::size_t chars_read = 0; - /// whether we can assume little endianess - const bool is_little_endian = little_endianess(); + /// whether we can assume little endianness + const bool is_little_endian = little_endianness(); + + /// input format + const input_format_t input_format = input_format_t::json; /// the SAX parser json_sax_t* sax = nullptr; + + // excluded markers in bjdata optimized type +#define JSON_BINARY_READER_MAKE_BJD_OPTIMIZED_TYPE_MARKERS_ \ + make_array('F', 'H', 'N', 'S', 'T', 'Z', '[', '{') + +#define JSON_BINARY_READER_MAKE_BJD_TYPES_MAP_ \ + make_array( \ + bjd_type{'B', "byte"}, \ + bjd_type{'C', "char"}, \ + bjd_type{'D', "double"}, \ + bjd_type{'I', "int16"}, \ + bjd_type{'L', "int64"}, \ + bjd_type{'M', "uint64"}, \ + bjd_type{'U', "uint8"}, \ + bjd_type{'d', "single"}, \ + bjd_type{'i', "int8"}, \ + bjd_type{'l', "int32"}, \ + bjd_type{'m', "uint32"}, \ + bjd_type{'u', "uint16"}) + + JSON_PRIVATE_UNLESS_TESTED: + // lookup tables + // NOLINTNEXTLINE(cppcoreguidelines-non-private-member-variables-in-classes) + const decltype(JSON_BINARY_READER_MAKE_BJD_OPTIMIZED_TYPE_MARKERS_) bjd_optimized_type_markers = + JSON_BINARY_READER_MAKE_BJD_OPTIMIZED_TYPE_MARKERS_; + + using bjd_type = std::pair; + // NOLINTNEXTLINE(cppcoreguidelines-non-private-member-variables-in-classes) + const decltype(JSON_BINARY_READER_MAKE_BJD_TYPES_MAP_) bjd_types_map = + JSON_BINARY_READER_MAKE_BJD_TYPES_MAP_; + +#undef JSON_BINARY_READER_MAKE_BJD_OPTIMIZED_TYPE_MARKERS_ +#undef JSON_BINARY_READER_MAKE_BJD_TYPES_MAP_ }; + +#ifndef JSON_HAS_CPP_17 + template + constexpr std::size_t binary_reader::npos; +#endif + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/input/input_adapters.hpp b/lib/json/include/nlohmann-vt/detail/input/input_adapters.hpp index 9ec68288a9..1f99f4af45 100644 --- a/lib/json/include/nlohmann-vt/detail/input/input_adapters.hpp +++ b/lib/json/include/nlohmann-vt/detail/input/input_adapters.hpp @@ -1,10 +1,16 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // array #include // size_t -#include //FILE * #include // strlen -#include // istream #include // begin, end, iterator_traits, random_access_iterator_tag, distance, next #include // shared_ptr, make_shared, addressof #include // accumulate @@ -12,20 +18,28 @@ #include // enable_if, is_base_of, is_pointer, is_integral, remove_pointer #include // pair, declval +#ifndef JSON_NO_IO + #include // FILE * + #include // istream +#endif // JSON_NO_IO + +#include #include #include +#include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + /// the supported input formats -enum class input_format_t { json, cbor, msgpack, ubjson, bson }; +enum class input_format_t { json, cbor, msgpack, ubjson, bson, bjdata }; //////////////////// // input adapters // //////////////////// +#ifndef JSON_NO_IO /*! Input adapter for stdio file access. This adapter read only 1 byte and do not use any buffer. This adapter is a very low level adapter. @@ -38,25 +52,34 @@ class file_input_adapter JSON_HEDLEY_NON_NULL(2) explicit file_input_adapter(std::FILE* f) noexcept : m_file(f) - {} + { + JSON_ASSERT(m_file != nullptr); + } // make class move-only file_input_adapter(const file_input_adapter&) = delete; - file_input_adapter(file_input_adapter&&) = default; + file_input_adapter(file_input_adapter&&) noexcept = default; file_input_adapter& operator=(const file_input_adapter&) = delete; file_input_adapter& operator=(file_input_adapter&&) = delete; + ~file_input_adapter() = default; std::char_traits::int_type get_character() noexcept { return std::fgetc(m_file); } + // returns the number of characters successfully read + template + std::size_t get_elements(T* dest, std::size_t count = 1) + { + return fread(dest, 1, sizeof(T) * count, m_file); + } + private: /// the file pointer to read from std::FILE* m_file; }; - /*! Input adapter for a (caching) istream. Ignores a UFT Byte Order Mark at beginning of input. Does not support changing the underlying std::streambuf @@ -88,9 +111,10 @@ class input_stream_adapter // delete because of pointer members input_stream_adapter(const input_stream_adapter&) = delete; input_stream_adapter& operator=(input_stream_adapter&) = delete; - input_stream_adapter& operator=(input_stream_adapter&& rhs) = delete; + input_stream_adapter& operator=(input_stream_adapter&&) = delete; - input_stream_adapter(input_stream_adapter&& rhs) noexcept : is(rhs.is), sb(rhs.sb) + input_stream_adapter(input_stream_adapter&& rhs) noexcept + : is(rhs.is), sb(rhs.sb) { rhs.is = nullptr; rhs.sb = nullptr; @@ -98,12 +122,23 @@ class input_stream_adapter // std::istream/std::streambuf use std::char_traits::to_int_type, to // ensure that std::char_traits::eof() and the character 0xFF do not - // end up as the same value, eg. 0xFFFFFFFF. + // end up as the same value, e.g. 0xFFFFFFFF. std::char_traits::int_type get_character() { auto res = sb->sbumpc(); // set eof manually, as we don't use the istream interface. - if (JSON_HEDLEY_UNLIKELY(res == EOF)) + if (JSON_HEDLEY_UNLIKELY(res == std::char_traits::eof())) + { + is->clear(is->rdstate() | std::ios::eofbit); + } + return res; + } + + template + std::size_t get_elements(T* dest, std::size_t count = 1) + { + auto res = static_cast(sb->sgetn(reinterpret_cast(dest), static_cast(count * sizeof(T)))); + if (JSON_HEDLEY_UNLIKELY(res < count * sizeof(T))) { is->clear(is->rdstate() | std::ios::eofbit); } @@ -115,6 +150,7 @@ class input_stream_adapter std::istream* is = nullptr; std::streambuf* sb = nullptr; }; +#endif // JSON_NO_IO // General-purpose iterator-based adapter. It might not be as fast as // theoretically possible for some containers, but it is extremely versatile. @@ -125,20 +161,39 @@ class iterator_input_adapter using char_type = typename std::iterator_traits::value_type; iterator_input_adapter(IteratorType first, IteratorType last) - : current(std::move(first)), end(std::move(last)) {} + : current(std::move(first)), end(std::move(last)) + {} - typename std::char_traits::int_type get_character() + typename char_traits::int_type get_character() { if (JSON_HEDLEY_LIKELY(current != end)) { - auto result = std::char_traits::to_int_type(*current); + auto result = char_traits::to_int_type(*current); std::advance(current, 1); return result; } - else + + return char_traits::eof(); + } + + // for general iterators, we cannot really do something better than falling back to processing the range one-by-one + template + std::size_t get_elements(T* dest, std::size_t count = 1) + { + auto* ptr = reinterpret_cast(dest); + for (std::size_t read_index = 0; read_index < count * sizeof(T); ++read_index) { - return std::char_traits::eof(); + if (JSON_HEDLEY_LIKELY(current != end)) + { + ptr[read_index] = static_cast(*current); + std::advance(current, 1); + } + else + { + return read_index; + } } + return count * sizeof(T); } private: @@ -152,10 +207,8 @@ class iterator_input_adapter { return current == end; } - }; - template struct wide_string_input_helper; @@ -279,7 +332,7 @@ struct wide_string_input_helper } }; -// Wraps another input apdater to convert wide character types into individual bytes. +// Wraps another input adapter to convert wide character types into individual bytes. template class wide_string_input_adapter { @@ -306,6 +359,13 @@ class wide_string_input_adapter return utf8_bytes[utf8_bytes_index++]; } + // parsing binary with wchar doesn't make sense, but since the parsing mode can be runtime, we need something here + template + std::size_t get_elements(T* /*dest*/, std::size_t /*count*/ = 1) + { + JSON_THROW(parse_error::create(112, 1, "wide string type cannot be interpreted as binary data", nullptr)); + } + private: BaseInputAdapter base_adapter; @@ -324,7 +384,6 @@ class wide_string_input_adapter std::size_t utf8_bytes_filled = 0; }; - template struct iterator_input_adapter_factory { @@ -371,19 +430,49 @@ typename iterator_input_adapter_factory::adapter_type input_adapte } // Convenience shorthand from container to iterator -template -auto input_adapter(const ContainerType& container) -> decltype(input_adapter(begin(container), end(container))) +// Enables ADL on begin(container) and end(container) +// Encloses the using declarations in namespace for not to leak them to outside scope + +namespace container_input_adapter_factory_impl { - // Enable ADL - using std::begin; - using std::end; +using std::begin; +using std::end; + +template +struct container_input_adapter_factory {}; + +template +struct container_input_adapter_factory< ContainerType, + void_t()), end(std::declval()))>> + { + using adapter_type = decltype(input_adapter(begin(std::declval()), end(std::declval()))); + + static adapter_type create(const ContainerType& container) +{ return input_adapter(begin(container), end(container)); } + }; + +} // namespace container_input_adapter_factory_impl + +template +typename container_input_adapter_factory_impl::container_input_adapter_factory::adapter_type input_adapter(const ContainerType& container) +{ + return container_input_adapter_factory_impl::container_input_adapter_factory::create(container); +} +// specialization for std::string +using string_input_adapter_type = decltype(input_adapter(std::declval())); + +#ifndef JSON_NO_IO // Special cases with fast paths inline file_input_adapter input_adapter(std::FILE* file) { + if (file == nullptr) + { + JSON_THROW(parse_error::create(101, 0, "attempting to parse an empty input; check that your input string or stream contains the expected JSON", nullptr)); + } return file_input_adapter(file); } @@ -396,6 +485,7 @@ inline input_stream_adapter input_adapter(std::istream&& stream) { return input_stream_adapter(stream); } +#endif // JSON_NO_IO using contiguous_bytes_input_adapter = decltype(input_adapter(std::declval(), std::declval())); @@ -409,19 +499,23 @@ template < typename CharT, int >::type = 0 > contiguous_bytes_input_adapter input_adapter(CharT b) { + if (b == nullptr) + { + JSON_THROW(parse_error::create(101, 0, "attempting to parse an empty input; check that your input string or stream contains the expected JSON", nullptr)); + } auto length = std::strlen(reinterpret_cast(b)); const auto* ptr = reinterpret_cast(b); - return input_adapter(ptr, ptr + length); + return input_adapter(ptr, ptr + length); // cppcheck-suppress[nullPointerArithmeticRedundantCheck] } template -auto input_adapter(T (&array)[N]) -> decltype(input_adapter(array, array + N)) +auto input_adapter(T (&array)[N]) -> decltype(input_adapter(array, array + N)) // NOLINT(cppcoreguidelines-avoid-c-arrays,hicpp-avoid-c-arrays,modernize-avoid-c-arrays) { return input_adapter(array, array + N); } // This class only handles inputs of input_buffer_adapter type. -// It's required so that expressions like {ptr, len} can be implicitely casted +// It's required so that expressions like {ptr, len} can be implicitly cast // to the correct adapter. class span_input_adapter { @@ -444,11 +538,12 @@ class span_input_adapter contiguous_bytes_input_adapter&& get() { - return std::move(ia); + return std::move(ia); // NOLINT(hicpp-move-const-arg,performance-move-const-arg) } private: contiguous_bytes_input_adapter ia; }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/input/json_sax.hpp b/lib/json/include/nlohmann-vt/detail/input/json_sax.hpp index 966b65b906..909357088c 100644 --- a/lib/json/include/nlohmann-vt/detail/input/json_sax.hpp +++ b/lib/json/include/nlohmann-vt/detail/input/json_sax.hpp @@ -1,15 +1,24 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include #include // string +#include // enable_if_t #include // move #include // vector #include +#include #include - -namespace nlohmann { inline namespace vt -{ +#include +NLOHMANN_JSON_NAMESPACE_BEGIN /*! @brief SAX interface @@ -56,7 +65,7 @@ struct json_sax virtual bool number_unsigned(number_unsigned_t val) = 0; /*! - @brief an floating-point number was read + @brief a floating-point number was read @param[in] val floating-point value @param[in] s raw token value @return whether parsing should proceed @@ -64,18 +73,18 @@ struct json_sax virtual bool number_float(number_float_t val, const string_t& s) = 0; /*! - @brief a string was read + @brief a string value was read @param[in] val string value @return whether parsing should proceed - @note It is safe to move the passed string. + @note It is safe to move the passed string value. */ virtual bool string(string_t& val) = 0; /*! - @brief a binary string was read + @brief a binary value was read @param[in] val binary value @return whether parsing should proceed - @note It is safe to move the passed binary. + @note It is safe to move the passed binary value. */ virtual bool binary(binary_t& val) = 0; @@ -126,12 +135,21 @@ struct json_sax const std::string& last_token, const detail::exception& ex) = 0; + json_sax() = default; + json_sax(const json_sax&) = default; + json_sax(json_sax&&) noexcept = default; + json_sax& operator=(const json_sax&) = default; + json_sax& operator=(json_sax&&) noexcept = default; virtual ~json_sax() = default; }; - namespace detail { +constexpr std::size_t unknown_size() +{ + return (std::numeric_limits::max)(); +} + /*! @brief SAX implementation to create a JSON value from SAX events @@ -145,7 +163,7 @@ constructor contains the parsed value. @tparam BasicJsonType the JSON type */ -template +template class json_sax_dom_parser { public: @@ -154,21 +172,22 @@ class json_sax_dom_parser using number_float_t = typename BasicJsonType::number_float_t; using string_t = typename BasicJsonType::string_t; using binary_t = typename BasicJsonType::binary_t; + using lexer_t = lexer; /*! - @param[in, out] r reference to a JSON value that is manipulated while + @param[in,out] r reference to a JSON value that is manipulated while parsing @param[in] allow_exceptions_ whether parse errors yield exceptions */ - explicit json_sax_dom_parser(BasicJsonType& r, const bool allow_exceptions_ = true) - : root(r), allow_exceptions(allow_exceptions_) + explicit json_sax_dom_parser(BasicJsonType& r, const bool allow_exceptions_ = true, lexer_t* lexer_ = nullptr) + : root(r), allow_exceptions(allow_exceptions_), m_lexer_ref(lexer_) {} // make class move-only json_sax_dom_parser(const json_sax_dom_parser&) = delete; - json_sax_dom_parser(json_sax_dom_parser&&) = default; + json_sax_dom_parser(json_sax_dom_parser&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) json_sax_dom_parser& operator=(const json_sax_dom_parser&) = delete; - json_sax_dom_parser& operator=(json_sax_dom_parser&&) = default; + json_sax_dom_parser& operator=(json_sax_dom_parser&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) ~json_sax_dom_parser() = default; bool null() @@ -217,10 +236,20 @@ class json_sax_dom_parser { ref_stack.push_back(handle_value(BasicJsonType::value_t::object)); - if (JSON_HEDLEY_UNLIKELY(len != std::size_t(-1) && len > ref_stack.back()->max_size())) +#if JSON_DIAGNOSTIC_POSITIONS + // Manually set the start position of the object here. + // Ensure this is after the call to handle_value to ensure correct start position. + if (m_lexer_ref) { - JSON_THROW(out_of_range::create(408, - "excessive object size: " + std::to_string(len))); + // Lexer has read the first character of the object, so + // subtract 1 from the position to get the correct start position. + ref_stack.back()->start_position = m_lexer_ref->get_position() - 1; + } +#endif + + if (JSON_HEDLEY_UNLIKELY(len != detail::unknown_size() && len > ref_stack.back()->max_size())) + { + JSON_THROW(out_of_range::create(408, concat("excessive object size: ", std::to_string(len)), ref_stack.back())); } return true; @@ -228,13 +257,28 @@ class json_sax_dom_parser bool key(string_t& val) { + JSON_ASSERT(!ref_stack.empty()); + JSON_ASSERT(ref_stack.back()->is_object()); + // add null at given key and store the reference for later - object_element = &(ref_stack.back()->m_value.object->operator[](val)); + object_element = &(ref_stack.back()->m_data.m_value.object->operator[](val)); return true; } bool end_object() { + JSON_ASSERT(!ref_stack.empty()); + JSON_ASSERT(ref_stack.back()->is_object()); + +#if JSON_DIAGNOSTIC_POSITIONS + if (m_lexer_ref) + { + // Lexer's position is past the closing brace, so set that as the end position. + ref_stack.back()->end_position = m_lexer_ref->get_position(); + } +#endif + + ref_stack.back()->set_parents(); ref_stack.pop_back(); return true; } @@ -243,10 +287,18 @@ class json_sax_dom_parser { ref_stack.push_back(handle_value(BasicJsonType::value_t::array)); - if (JSON_HEDLEY_UNLIKELY(len != std::size_t(-1) && len > ref_stack.back()->max_size())) +#if JSON_DIAGNOSTIC_POSITIONS + // Manually set the start position of the array here. + // Ensure this is after the call to handle_value to ensure correct start position. + if (m_lexer_ref) { - JSON_THROW(out_of_range::create(408, - "excessive array size: " + std::to_string(len))); + ref_stack.back()->start_position = m_lexer_ref->get_position() - 1; + } +#endif + + if (JSON_HEDLEY_UNLIKELY(len != detail::unknown_size() && len > ref_stack.back()->max_size())) + { + JSON_THROW(out_of_range::create(408, concat("excessive array size: ", std::to_string(len)), ref_stack.back())); } return true; @@ -254,6 +306,18 @@ class json_sax_dom_parser bool end_array() { + JSON_ASSERT(!ref_stack.empty()); + JSON_ASSERT(ref_stack.back()->is_array()); + +#if JSON_DIAGNOSTIC_POSITIONS + if (m_lexer_ref) + { + // Lexer's position is past the closing bracket, so set that as the end position. + ref_stack.back()->end_position = m_lexer_ref->get_position(); + } +#endif + + ref_stack.back()->set_parents(); ref_stack.pop_back(); return true; } @@ -277,6 +341,75 @@ class json_sax_dom_parser } private: + +#if JSON_DIAGNOSTIC_POSITIONS + void handle_diagnostic_positions_for_json_value(BasicJsonType& v) + { + if (m_lexer_ref) + { + // Lexer has read past the current field value, so set the end position to the current position. + // The start position will be set below based on the length of the string representation + // of the value. + v.end_position = m_lexer_ref->get_position(); + + switch (v.type()) + { + case value_t::boolean: + { + // 4 and 5 are the string length of "true" and "false" + v.start_position = v.end_position - (v.m_data.m_value.boolean ? 4 : 5); + break; + } + + case value_t::null: + { + // 4 is the string length of "null" + v.start_position = v.end_position - 4; + break; + } + + case value_t::string: + { + // include the length of the quotes, which is 2 + v.start_position = v.end_position - v.m_data.m_value.string->size() - 2; + break; + } + + // As we handle the start and end positions for values created during parsing, + // we do not expect the following value type to be called. Regardless, set the positions + // in case this is created manually or through a different constructor. Exclude from lcov + // since the exact condition of this switch is esoteric. + // LCOV_EXCL_START + case value_t::discarded: + { + v.end_position = std::string::npos; + v.start_position = v.end_position; + break; + } + // LCOV_EXCL_STOP + case value_t::binary: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + { + v.start_position = v.end_position - m_lexer_ref->get_string().size(); + break; + } + case value_t::object: + case value_t::array: + { + // object and array are handled in start_object() and start_array() handlers + // skip setting the values here. + break; + } + default: // LCOV_EXCL_LINE + // Handle all possible types discretely, default handler should never be reached. + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert,-warnings-as-errors) LCOV_EXCL_LINE + } + } + } +#endif + /*! @invariant If the ref stack is empty, then the passed value will be the new root. @@ -290,6 +423,11 @@ class json_sax_dom_parser if (ref_stack.empty()) { root = BasicJsonType(std::forward(v)); + +#if JSON_DIAGNOSTIC_POSITIONS + handle_diagnostic_positions_for_json_value(root); +#endif + return &root; } @@ -297,13 +435,23 @@ class json_sax_dom_parser if (ref_stack.back()->is_array()) { - ref_stack.back()->m_value.array->emplace_back(std::forward(v)); - return &(ref_stack.back()->m_value.array->back()); + ref_stack.back()->m_data.m_value.array->emplace_back(std::forward(v)); + +#if JSON_DIAGNOSTIC_POSITIONS + handle_diagnostic_positions_for_json_value(ref_stack.back()->m_data.m_value.array->back()); +#endif + + return &(ref_stack.back()->m_data.m_value.array->back()); } JSON_ASSERT(ref_stack.back()->is_object()); JSON_ASSERT(object_element); *object_element = BasicJsonType(std::forward(v)); + +#if JSON_DIAGNOSTIC_POSITIONS + handle_diagnostic_positions_for_json_value(*object_element); +#endif + return object_element; } @@ -317,9 +465,11 @@ class json_sax_dom_parser bool errored = false; /// whether to throw exceptions in case of errors const bool allow_exceptions = true; + /// the lexer reference to obtain the current position + lexer_t* m_lexer_ref = nullptr; }; -template +template class json_sax_dom_callback_parser { public: @@ -330,20 +480,22 @@ class json_sax_dom_callback_parser using binary_t = typename BasicJsonType::binary_t; using parser_callback_t = typename BasicJsonType::parser_callback_t; using parse_event_t = typename BasicJsonType::parse_event_t; + using lexer_t = lexer; json_sax_dom_callback_parser(BasicJsonType& r, - const parser_callback_t cb, - const bool allow_exceptions_ = true) - : root(r), callback(cb), allow_exceptions(allow_exceptions_) + parser_callback_t cb, + const bool allow_exceptions_ = true, + lexer_t* lexer_ = nullptr) + : root(r), callback(std::move(cb)), allow_exceptions(allow_exceptions_), m_lexer_ref(lexer_) { keep_stack.push_back(true); } // make class move-only json_sax_dom_callback_parser(const json_sax_dom_callback_parser&) = delete; - json_sax_dom_callback_parser(json_sax_dom_callback_parser&&) = default; + json_sax_dom_callback_parser(json_sax_dom_callback_parser&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) json_sax_dom_callback_parser& operator=(const json_sax_dom_callback_parser&) = delete; - json_sax_dom_callback_parser& operator=(json_sax_dom_callback_parser&&) = default; + json_sax_dom_callback_parser& operator=(json_sax_dom_callback_parser&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) ~json_sax_dom_callback_parser() = default; bool null() @@ -397,12 +549,26 @@ class json_sax_dom_callback_parser auto val = handle_value(BasicJsonType::value_t::object, true); ref_stack.push_back(val.second); - // check object limit - if (ref_stack.back() && JSON_HEDLEY_UNLIKELY(len != std::size_t(-1) && len > ref_stack.back()->max_size())) + if (ref_stack.back()) { - JSON_THROW(out_of_range::create(408, "excessive object size: " + std::to_string(len))); - } +#if JSON_DIAGNOSTIC_POSITIONS + // Manually set the start position of the object here. + // Ensure this is after the call to handle_value to ensure correct start position. + if (m_lexer_ref) + { + // Lexer has read the first character of the object, so + // subtract 1 from the position to get the correct start position. + ref_stack.back()->start_position = m_lexer_ref->get_position() - 1; + } +#endif + + // check object limit + if (JSON_HEDLEY_UNLIKELY(len != detail::unknown_size() && len > ref_stack.back()->max_size())) + { + JSON_THROW(out_of_range::create(408, concat("excessive object size: ", std::to_string(len)), ref_stack.back())); + } + } return true; } @@ -417,7 +583,7 @@ class json_sax_dom_callback_parser // add discarded value at given key and store the reference for later if (keep && ref_stack.back()) { - object_element = &(ref_stack.back()->m_value.object->operator[](val) = discarded); + object_element = &(ref_stack.back()->m_data.m_value.object->operator[](val) = discarded); } return true; @@ -425,10 +591,31 @@ class json_sax_dom_callback_parser bool end_object() { - if (ref_stack.back() && !callback(static_cast(ref_stack.size()) - 1, parse_event_t::object_end, *ref_stack.back())) + if (ref_stack.back()) { - // discard object - *ref_stack.back() = discarded; + if (!callback(static_cast(ref_stack.size()) - 1, parse_event_t::object_end, *ref_stack.back())) + { + // discard object + *ref_stack.back() = discarded; + +#if JSON_DIAGNOSTIC_POSITIONS + // Set start/end positions for discarded object. + handle_diagnostic_positions_for_json_value(*ref_stack.back()); +#endif + } + else + { + +#if JSON_DIAGNOSTIC_POSITIONS + if (m_lexer_ref) + { + // Lexer's position is past the closing brace, so set that as the end position. + ref_stack.back()->end_position = m_lexer_ref->get_position(); + } +#endif + + ref_stack.back()->set_parents(); + } } JSON_ASSERT(!ref_stack.empty()); @@ -460,10 +647,25 @@ class json_sax_dom_callback_parser auto val = handle_value(BasicJsonType::value_t::array, true); ref_stack.push_back(val.second); - // check array limit - if (ref_stack.back() && JSON_HEDLEY_UNLIKELY(len != std::size_t(-1) && len > ref_stack.back()->max_size())) + if (ref_stack.back()) { - JSON_THROW(out_of_range::create(408, "excessive array size: " + std::to_string(len))); + +#if JSON_DIAGNOSTIC_POSITIONS + // Manually set the start position of the array here. + // Ensure this is after the call to handle_value to ensure correct start position. + if (m_lexer_ref) + { + // Lexer has read the first character of the array, so + // subtract 1 from the position to get the correct start position. + ref_stack.back()->start_position = m_lexer_ref->get_position() - 1; + } +#endif + + // check array limit + if (JSON_HEDLEY_UNLIKELY(len != detail::unknown_size() && len > ref_stack.back()->max_size())) + { + JSON_THROW(out_of_range::create(408, concat("excessive array size: ", std::to_string(len)), ref_stack.back())); + } } return true; @@ -476,10 +678,28 @@ class json_sax_dom_callback_parser if (ref_stack.back()) { keep = callback(static_cast(ref_stack.size()) - 1, parse_event_t::array_end, *ref_stack.back()); - if (!keep) + if (keep) + { + +#if JSON_DIAGNOSTIC_POSITIONS + if (m_lexer_ref) + { + // Lexer's position is past the closing bracket, so set that as the end position. + ref_stack.back()->end_position = m_lexer_ref->get_position(); + } +#endif + + ref_stack.back()->set_parents(); + } + else { // discard array *ref_stack.back() = discarded; + +#if JSON_DIAGNOSTIC_POSITIONS + // Set start/end positions for discarded array. + handle_diagnostic_positions_for_json_value(*ref_stack.back()); +#endif } } @@ -491,7 +711,7 @@ class json_sax_dom_callback_parser // remove discarded value if (!keep && !ref_stack.empty() && ref_stack.back()->is_array()) { - ref_stack.back()->m_value.array->pop_back(); + ref_stack.back()->m_data.m_value.array->pop_back(); } return true; @@ -516,6 +736,71 @@ class json_sax_dom_callback_parser } private: + +#if JSON_DIAGNOSTIC_POSITIONS + void handle_diagnostic_positions_for_json_value(BasicJsonType& v) + { + if (m_lexer_ref) + { + // Lexer has read past the current field value, so set the end position to the current position. + // The start position will be set below based on the length of the string representation + // of the value. + v.end_position = m_lexer_ref->get_position(); + + switch (v.type()) + { + case value_t::boolean: + { + // 4 and 5 are the string length of "true" and "false" + v.start_position = v.end_position - (v.m_data.m_value.boolean ? 4 : 5); + break; + } + + case value_t::null: + { + // 4 is the string length of "null" + v.start_position = v.end_position - 4; + break; + } + + case value_t::string: + { + // include the length of the quotes, which is 2 + v.start_position = v.end_position - v.m_data.m_value.string->size() - 2; + break; + } + + case value_t::discarded: + { + v.end_position = std::string::npos; + v.start_position = v.end_position; + break; + } + + case value_t::binary: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + { + v.start_position = v.end_position - m_lexer_ref->get_string().size(); + break; + } + + case value_t::object: + case value_t::array: + { + // object and array are handled in start_object() and start_array() handlers + // skip setting the values here. + break; + } + default: // LCOV_EXCL_LINE + // Handle all possible types discretely, default handler should never be reached. + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert,-warnings-as-errors) LCOV_EXCL_LINE + } + } + } +#endif + /*! @param[in] v value to add to the JSON value we build during parsing @param[in] skip_callback whether we should skip calling the callback @@ -546,6 +831,10 @@ class json_sax_dom_callback_parser // create value auto value = BasicJsonType(std::forward(v)); +#if JSON_DIAGNOSTIC_POSITIONS + handle_diagnostic_positions_for_json_value(value); +#endif + // check callback const bool keep = skip_callback || callback(static_cast(ref_stack.size()), parse_event_t::value, value); @@ -558,7 +847,7 @@ class json_sax_dom_callback_parser if (ref_stack.empty()) { root = std::move(value); - return {true, &root}; + return {true, & root}; } // skip this value if we already decided to skip the parent @@ -574,8 +863,8 @@ class json_sax_dom_callback_parser // array if (ref_stack.back()->is_array()) { - ref_stack.back()->m_value.array->push_back(std::move(value)); - return {true, &(ref_stack.back()->m_value.array->back())}; + ref_stack.back()->m_data.m_value.array->emplace_back(std::move(value)); + return {true, & (ref_stack.back()->m_data.m_value.array->back())}; } // object @@ -600,9 +889,9 @@ class json_sax_dom_callback_parser /// stack to model hierarchy of values std::vector ref_stack {}; /// stack to manage which values to keep - std::vector keep_stack {}; + std::vector keep_stack {}; // NOLINT(readability-redundant-member-init) /// stack to manage which object keys to keep - std::vector key_keep_stack {}; + std::vector key_keep_stack {}; // NOLINT(readability-redundant-member-init) /// helper to hold the reference for the next object element BasicJsonType* object_element = nullptr; /// whether a syntax error occurred @@ -613,6 +902,8 @@ class json_sax_dom_callback_parser const bool allow_exceptions = true; /// a discarded value for the callback BasicJsonType discarded = BasicJsonType::value_t::discarded; + /// the lexer reference to obtain the current position + lexer_t* m_lexer_ref = nullptr; }; template @@ -660,7 +951,7 @@ class json_sax_acceptor return true; } - bool start_object(std::size_t /*unused*/ = std::size_t(-1)) + bool start_object(std::size_t /*unused*/ = detail::unknown_size()) { return true; } @@ -675,7 +966,7 @@ class json_sax_acceptor return true; } - bool start_array(std::size_t /*unused*/ = std::size_t(-1)) + bool start_array(std::size_t /*unused*/ = detail::unknown_size()) { return true; } @@ -690,6 +981,6 @@ class json_sax_acceptor return false; } }; -} // namespace detail -}} // namespace nlohmann::vt +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/input/lexer.hpp b/lib/json/include/nlohmann-vt/detail/input/lexer.hpp index 946c576f97..aafb8686af 100644 --- a/lib/json/include/nlohmann-vt/detail/input/lexer.hpp +++ b/lib/json/include/nlohmann-vt/detail/input/lexer.hpp @@ -1,3 +1,11 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // array @@ -13,11 +21,12 @@ #include #include #include +#include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + /////////// // lexer // /////////// @@ -107,12 +116,12 @@ class lexer : public lexer_base using number_float_t = typename BasicJsonType::number_float_t; using string_t = typename BasicJsonType::string_t; using char_type = typename InputAdapterType::char_type; - using char_int_type = typename std::char_traits::int_type; + using char_int_type = typename char_traits::int_type; public: using token_type = typename lexer_base::token_type; - explicit lexer(InputAdapterType&& adapter, bool ignore_comments_ = false) + explicit lexer(InputAdapterType&& adapter, bool ignore_comments_ = false) noexcept : ia(std::move(adapter)) , ignore_comments(ignore_comments_) , decimal_point_char(static_cast(get_decimal_point())) @@ -120,9 +129,9 @@ class lexer : public lexer_base // delete because of pointer members lexer(const lexer&) = delete; - lexer(lexer&&) = default; + lexer(lexer&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) lexer& operator=(lexer&) = delete; - lexer& operator=(lexer&&) = default; + lexer& operator=(lexer&&) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor) ~lexer() = default; private: @@ -214,7 +223,7 @@ class lexer : public lexer_base for (auto range = ranges.begin(); range != ranges.end(); ++range) { get(); - if (JSON_HEDLEY_LIKELY(*range <= current && current <= *(++range))) + if (JSON_HEDLEY_LIKELY(*range <= current && current <= *(++range))) // NOLINT(bugprone-inc-dec-in-conditions) { add(current); } @@ -231,7 +240,7 @@ class lexer : public lexer_base /*! @brief scan a string literal - This function scans a string according to Sect. 7 of RFC 7159. While + This function scans a string according to Sect. 7 of RFC 8259. While scanning, bytes are escaped and copied into buffer token_buffer. Then the function returns successfully, token_buffer is *not* null-terminated (as it may contain \0 bytes), and token_buffer.size() is the number of bytes in the @@ -257,7 +266,7 @@ class lexer : public lexer_base switch (get()) { // end of file while parsing string - case std::char_traits::eof(): + case char_traits::eof(): { error_message = "invalid string: missing closing quote"; return token_type::parse_error; @@ -343,7 +352,7 @@ class lexer : public lexer_base // low surrogate occupies the least significant 15 bits + static_cast(codepoint2) // there is still the 0xD800, 0xDC00 and 0x10000 noise - // in the result so we have to subtract with: + // in the result, so we have to subtract with: // (0xD800 << 10) + DC00 - 0x10000 = 0x35FDC00 - 0x35FDC00u); } @@ -846,7 +855,7 @@ class lexer : public lexer_base { case '\n': case '\r': - case std::char_traits::eof(): + case char_traits::eof(): case '\0': return true; @@ -863,7 +872,7 @@ class lexer : public lexer_base { switch (get()) { - case std::char_traits::eof(): + case char_traits::eof(): case '\0': { error_message = "invalid comment; missing closing '*/'"; @@ -921,10 +930,10 @@ class lexer : public lexer_base /*! @brief scan a number literal - This function scans a string according to Sect. 6 of RFC 7159. + This function scans a string according to Sect. 6 of RFC 8259. The function is realized with a deterministic finite state machine derived - from the grammar described in RFC 7159. Starting in state "init", the + from the grammar described in RFC 8259. Starting in state "init", the input is read and used to determined the next state. Only state "done" accepts the number. State "error" is a trap state to model errors. In the table below, "anything" means any character but the ones listed before. @@ -958,7 +967,7 @@ class lexer : public lexer_base locale's decimal point is used instead of `.` to work with the locale-dependent converters. */ - token_type scan_number() // lgtm [cpp/use-of-goto] + token_type scan_number() // lgtm [cpp/use-of-goto] `goto` is used in this function to implement the number-parsing state machine described above. By design, any finite input will eventually reach the "done" state or return token_type::parse_error. In each intermediate state, 1 byte of the input is appended to the token_buffer vector, and only the already initialized variables token_buffer, number_type, and error_message are manipulated. { // reset token_buffer to store the number's bytes reset(); @@ -998,7 +1007,7 @@ class lexer : public lexer_base // all other characters are rejected outside scan_number() default: // LCOV_EXCL_LINE - JSON_ASSERT(false); // LCOV_EXCL_LINE + JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE } scan_number_minus: @@ -1040,6 +1049,7 @@ class lexer : public lexer_base case '.': { add(decimal_point_char); + decimal_point_position = token_buffer.size() - 1; goto scan_number_decimal1; } @@ -1076,6 +1086,7 @@ class lexer : public lexer_base case '.': { add(decimal_point_char); + decimal_point_position = token_buffer.size() - 1; goto scan_number_decimal1; } @@ -1236,7 +1247,7 @@ class lexer : public lexer_base // we are done scanning a number) unget(); - char* endptr = nullptr; + char* endptr = nullptr; // NOLINT(misc-const-correctness,cppcoreguidelines-pro-type-vararg,hicpp-vararg) errno = 0; // try to parse integers first and fall back to floats @@ -1247,7 +1258,7 @@ class lexer : public lexer_base // we checked the number format before JSON_ASSERT(endptr == token_buffer.data() + token_buffer.size()); - if (errno == 0) + if (errno != ERANGE) { value_unsigned = static_cast(x); if (value_unsigned == x) @@ -1263,7 +1274,7 @@ class lexer : public lexer_base // we checked the number format before JSON_ASSERT(endptr == token_buffer.data() + token_buffer.size()); - if (errno == 0) + if (errno != ERANGE) { value_integer = static_cast(x); if (value_integer == x) @@ -1292,10 +1303,10 @@ class lexer : public lexer_base token_type scan_literal(const char_type* literal_text, const std::size_t length, token_type return_type) { - JSON_ASSERT(std::char_traits::to_char_type(current) == literal_text[0]); + JSON_ASSERT(char_traits::to_char_type(current) == literal_text[0]); for (std::size_t i = 1; i < length; ++i) { - if (JSON_HEDLEY_UNLIKELY(std::char_traits::to_char_type(get()) != literal_text[i])) + if (JSON_HEDLEY_UNLIKELY(char_traits::to_char_type(get()) != literal_text[i])) { error_message = "invalid literal"; return token_type::parse_error; @@ -1313,7 +1324,8 @@ class lexer : public lexer_base { token_buffer.clear(); token_string.clear(); - token_string.push_back(std::char_traits::to_char_type(current)); + decimal_point_position = std::string::npos; + token_string.push_back(char_traits::to_char_type(current)); } /* @@ -1321,7 +1333,7 @@ class lexer : public lexer_base This function provides the interface to the used input adapter. It does not throw in case the input reached EOF, but returns a - `std::char_traits::eof()` in that case. Stores the scanned characters + `char_traits::eof()` in that case. Stores the scanned characters for use in error messages. @return character read from the input @@ -1341,9 +1353,9 @@ class lexer : public lexer_base current = ia.get_character(); } - if (JSON_HEDLEY_LIKELY(current != std::char_traits::eof())) + if (JSON_HEDLEY_LIKELY(current != char_traits::eof())) { - token_string.push_back(std::char_traits::to_char_type(current)); + token_string.push_back(char_traits::to_char_type(current)); } if (current == '\n') @@ -1382,7 +1394,7 @@ class lexer : public lexer_base --position.chars_read_current_line; } - if (JSON_HEDLEY_LIKELY(current != std::char_traits::eof())) + if (JSON_HEDLEY_LIKELY(current != char_traits::eof())) { JSON_ASSERT(!token_string.empty()); token_string.pop_back(); @@ -1421,6 +1433,11 @@ class lexer : public lexer_base /// return current string value (implicitly resets the token; useful only once) string_t& get_string() { + // translate decimal points from locale back to '.' (#4084) + if (decimal_point_char != '.' && decimal_point_position != std::string::npos) + { + token_buffer[decimal_point_position] = '.'; + } return token_buffer; } @@ -1447,7 +1464,7 @@ class lexer : public lexer_base { // escape control characters std::array cs{{}}; - (std::snprintf)(cs.data(), cs.size(), "", static_cast(c)); + static_cast((std::snprintf)(cs.data(), cs.size(), "", static_cast(c))); // NOLINT(cppcoreguidelines-pro-type-vararg,hicpp-vararg) result += cs.data(); } else @@ -1541,17 +1558,17 @@ class lexer : public lexer_base // literals case 't': { - std::array true_literal = {{'t', 'r', 'u', 'e'}}; + std::array true_literal = {{static_cast('t'), static_cast('r'), static_cast('u'), static_cast('e')}}; return scan_literal(true_literal.data(), true_literal.size(), token_type::literal_true); } case 'f': { - std::array false_literal = {{'f', 'a', 'l', 's', 'e'}}; + std::array false_literal = {{static_cast('f'), static_cast('a'), static_cast('l'), static_cast('s'), static_cast('e')}}; return scan_literal(false_literal.data(), false_literal.size(), token_type::literal_false); } case 'n': { - std::array null_literal = {{'n', 'u', 'l', 'l'}}; + std::array null_literal = {{static_cast('n'), static_cast('u'), static_cast('l'), static_cast('l')}}; return scan_literal(null_literal.data(), null_literal.size(), token_type::literal_null); } @@ -1576,7 +1593,7 @@ class lexer : public lexer_base // end of input (the null byte is needed when parsing from // string literals) case '\0': - case std::char_traits::eof(): + case char_traits::eof(): return token_type::end_of_input; // error @@ -1594,7 +1611,7 @@ class lexer : public lexer_base const bool ignore_comments = false; /// the current character - char_int_type current = std::char_traits::eof(); + char_int_type current = char_traits::eof(); /// whether the next get() call should just return current bool next_unget = false; @@ -1618,6 +1635,9 @@ class lexer : public lexer_base /// the decimal point const char_int_type decimal_point_char = '.'; + /// the position of the decimal point in the input + std::size_t decimal_point_position = std::string::npos; }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/input/parser.hpp b/lib/json/include/nlohmann-vt/detail/input/parser.hpp index ca22c56d80..60a94c6221 100644 --- a/lib/json/include/nlohmann-vt/detail/input/parser.hpp +++ b/lib/json/include/nlohmann-vt/detail/input/parser.hpp @@ -1,3 +1,11 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // isfinite @@ -13,17 +21,17 @@ #include #include #include +#include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { //////////// // parser // //////////// -enum class parse_event_t : uint8_t +enum class parse_event_t : std::uint8_t { /// the parser read `{` and started to process a JSON object object_start, @@ -41,7 +49,7 @@ enum class parse_event_t : uint8_t template using parser_callback_t = - std::function; + std::function; /*! @brief syntax analysis @@ -61,10 +69,10 @@ class parser public: /// a parser reading from an input adapter explicit parser(InputAdapterType&& adapter, - const parser_callback_t cb = nullptr, + parser_callback_t cb = nullptr, const bool allow_exceptions_ = true, const bool skip_comments = false) - : callback(cb) + : callback(std::move(cb)) , m_lexer(std::move(adapter), skip_comments) , allow_exceptions(allow_exceptions_) { @@ -86,9 +94,8 @@ class parser { if (callback) { - json_sax_dom_callback_parser sdp(result, callback, allow_exceptions); + json_sax_dom_callback_parser sdp(result, callback, allow_exceptions, &m_lexer); sax_parse_internal(&sdp); - result.assert_invariant(); // in strict mode, input must be completely read if (strict && (get_token() != token_type::end_of_input)) @@ -96,7 +103,7 @@ class parser sdp.parse_error(m_lexer.get_position(), m_lexer.get_token_string(), parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::end_of_input, "value"))); + exception_message(token_type::end_of_input, "value"), nullptr)); } // in case of an error, return discarded value @@ -115,17 +122,15 @@ class parser } else { - json_sax_dom_parser sdp(result, allow_exceptions); + json_sax_dom_parser sdp(result, allow_exceptions, &m_lexer); sax_parse_internal(&sdp); - result.assert_invariant(); // in strict mode, input must be completely read if (strict && (get_token() != token_type::end_of_input)) { sdp.parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::end_of_input, "value"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::end_of_input, "value"), nullptr)); } // in case of an error, return discarded value @@ -135,6 +140,8 @@ class parser return; } } + + result.assert_invariant(); } /*! @@ -161,8 +168,7 @@ class parser { return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::end_of_input, "value"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::end_of_input, "value"), nullptr)); } return result; @@ -188,7 +194,7 @@ class parser { case token_type::begin_object: { - if (JSON_HEDLEY_UNLIKELY(!sax->start_object(std::size_t(-1)))) + if (JSON_HEDLEY_UNLIKELY(!sax->start_object(detail::unknown_size()))) { return false; } @@ -208,8 +214,7 @@ class parser { return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::value_string, "object key"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::value_string, "object key"), nullptr)); } if (JSON_HEDLEY_UNLIKELY(!sax->key(m_lexer.get_string()))) { @@ -221,8 +226,7 @@ class parser { return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::name_separator, "object separator"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::name_separator, "object separator"), nullptr)); } // remember we are now inside an object @@ -235,7 +239,7 @@ class parser case token_type::begin_array: { - if (JSON_HEDLEY_UNLIKELY(!sax->start_array(std::size_t(-1)))) + if (JSON_HEDLEY_UNLIKELY(!sax->start_array(detail::unknown_size()))) { return false; } @@ -265,7 +269,7 @@ class parser { return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - out_of_range::create(406, "number overflow parsing '" + m_lexer.get_token_string() + "'")); + out_of_range::create(406, concat("number overflow parsing '", m_lexer.get_token_string(), '\''), nullptr)); } if (JSON_HEDLEY_UNLIKELY(!sax->number_float(res, m_lexer.get_string()))) @@ -335,16 +339,33 @@ class parser // using "uninitialized" to avoid "expected" message return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::uninitialized, "value"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::uninitialized, "value"), nullptr)); } + case token_type::end_of_input: + { + if (JSON_HEDLEY_UNLIKELY(m_lexer.get_position().chars_read_total == 1)) + { + return sax->parse_error(m_lexer.get_position(), + m_lexer.get_token_string(), + parse_error::create(101, m_lexer.get_position(), + "attempting to parse an empty input; check that your input string or stream contains the expected JSON", nullptr)); + } + return sax->parse_error(m_lexer.get_position(), + m_lexer.get_token_string(), + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::literal_or_value, "value"), nullptr)); + } + case token_type::uninitialized: + case token_type::end_array: + case token_type::end_object: + case token_type::name_separator: + case token_type::value_separator: + case token_type::literal_or_value: default: // the last token was unexpected { return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::literal_or_value, "value"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::literal_or_value, "value"), nullptr)); } } } @@ -390,65 +411,61 @@ class parser return sax->parse_error(m_lexer.get_position(), m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::end_array, "array"))); + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::end_array, "array"), nullptr)); } - else // object - { - // comma -> next value - if (get_token() == token_type::value_separator) - { - // parse key - if (JSON_HEDLEY_UNLIKELY(get_token() != token_type::value_string)) - { - return sax->parse_error(m_lexer.get_position(), - m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::value_string, "object key"))); - } - if (JSON_HEDLEY_UNLIKELY(!sax->key(m_lexer.get_string()))) - { - return false; - } + // states.back() is false -> object - // parse separator (:) - if (JSON_HEDLEY_UNLIKELY(get_token() != token_type::name_separator)) - { - return sax->parse_error(m_lexer.get_position(), - m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::name_separator, "object separator"))); - } + // comma -> next value + if (get_token() == token_type::value_separator) + { + // parse key + if (JSON_HEDLEY_UNLIKELY(get_token() != token_type::value_string)) + { + return sax->parse_error(m_lexer.get_position(), + m_lexer.get_token_string(), + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::value_string, "object key"), nullptr)); + } - // parse values - get_token(); - continue; + if (JSON_HEDLEY_UNLIKELY(!sax->key(m_lexer.get_string()))) + { + return false; } - // closing } - if (JSON_HEDLEY_LIKELY(last_token == token_type::end_object)) + // parse separator (:) + if (JSON_HEDLEY_UNLIKELY(get_token() != token_type::name_separator)) { - if (JSON_HEDLEY_UNLIKELY(!sax->end_object())) - { - return false; - } + return sax->parse_error(m_lexer.get_position(), + m_lexer.get_token_string(), + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::name_separator, "object separator"), nullptr)); + } - // We are done with this object. Before we can parse a - // new value, we need to evaluate the new state first. - // By setting skip_to_state_evaluation to false, we - // are effectively jumping to the beginning of this if. - JSON_ASSERT(!states.empty()); - states.pop_back(); - skip_to_state_evaluation = true; - continue; + // parse values + get_token(); + continue; + } + + // closing } + if (JSON_HEDLEY_LIKELY(last_token == token_type::end_object)) + { + if (JSON_HEDLEY_UNLIKELY(!sax->end_object())) + { + return false; } - return sax->parse_error(m_lexer.get_position(), - m_lexer.get_token_string(), - parse_error::create(101, m_lexer.get_position(), - exception_message(token_type::end_object, "object"))); + // We are done with this object. Before we can parse a + // new value, we need to evaluate the new state first. + // By setting skip_to_state_evaluation to false, we + // are effectively jumping to the beginning of this if. + JSON_ASSERT(!states.empty()); + states.pop_back(); + skip_to_state_evaluation = true; + continue; } + + return sax->parse_error(m_lexer.get_position(), + m_lexer.get_token_string(), + parse_error::create(101, m_lexer.get_position(), exception_message(token_type::end_object, "object"), nullptr)); } } @@ -464,24 +481,24 @@ class parser if (!context.empty()) { - error_msg += "while parsing " + context + " "; + error_msg += concat("while parsing ", context, ' '); } error_msg += "- "; if (last_token == token_type::parse_error) { - error_msg += std::string(m_lexer.get_error_message()) + "; last read: '" + - m_lexer.get_token_string() + "'"; + error_msg += concat(m_lexer.get_error_message(), "; last read: '", + m_lexer.get_token_string(), '\''); } else { - error_msg += "unexpected " + std::string(lexer_t::token_type_name(last_token)); + error_msg += concat("unexpected ", lexer_t::token_type_name(last_token)); } if (expected != token_type::uninitialized) { - error_msg += "; expected " + std::string(lexer_t::token_type_name(expected)); + error_msg += concat("; expected ", lexer_t::token_type_name(expected)); } return error_msg; @@ -497,5 +514,6 @@ class parser /// whether to throw exceptions in case of errors const bool allow_exceptions = true; }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/input/position_t.hpp b/lib/json/include/nlohmann-vt/detail/input/position_t.hpp index 24fe94e8ec..0b43d6af83 100644 --- a/lib/json/include/nlohmann-vt/detail/input/position_t.hpp +++ b/lib/json/include/nlohmann-vt/detail/input/position_t.hpp @@ -1,11 +1,21 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // size_t -namespace nlohmann { inline namespace vt -{ +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + /// struct to capture the start position of the current token struct position_t { @@ -23,5 +33,5 @@ struct position_t } }; -} // namespace detail -}} // namespace nlohmann::vt +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/iterators/internal_iterator.hpp b/lib/json/include/nlohmann-vt/detail/iterators/internal_iterator.hpp index f73d8ab02a..e1fd0bb151 100644 --- a/lib/json/include/nlohmann-vt/detail/iterators/internal_iterator.hpp +++ b/lib/json/include/nlohmann-vt/detail/iterators/internal_iterator.hpp @@ -1,11 +1,20 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once +#include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + /*! @brief an iterator value @@ -21,5 +30,6 @@ template struct internal_iterator /// generic iterator for all other types primitive_iterator_t primitive_iterator {}; }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/iterators/iter_impl.hpp b/lib/json/include/nlohmann-vt/detail/iterators/iter_impl.hpp index f977a67701..7863a60df4 100644 --- a/lib/json/include/nlohmann-vt/detail/iterators/iter_impl.hpp +++ b/lib/json/include/nlohmann-vt/detail/iterators/iter_impl.hpp @@ -1,3 +1,11 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // iterator, random_access_iterator_tag, bidirectional_iterator_tag, advance, next @@ -11,10 +19,10 @@ #include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + // forward declare, to be able to friend it later on template class iteration_proxy; template class iteration_proxy_value; @@ -36,10 +44,12 @@ This class implements a both iterators (iterator and const_iterator) for the iterators in version 3.0.0 (see https://github.com/nlohmann/json/issues/593) */ template -class iter_impl +class iter_impl // NOLINT(cppcoreguidelines-special-member-functions,hicpp-special-member-functions) { + /// the iterator with BasicJsonType of different const-ness + using other_iter_impl = iter_impl::value, typename std::remove_const::type, const BasicJsonType>::type>; /// allow basic_json to access private members - friend iter_impl::value, typename std::remove_const::type, const BasicJsonType>::type>; + friend other_iter_impl; friend BasicJsonType; friend iteration_proxy; friend iteration_proxy_value; @@ -49,9 +59,12 @@ class iter_impl // make sure BasicJsonType is basic_json or const basic_json static_assert(is_basic_json::type>::value, "iter_impl only accepts (const) basic_json"); + // superficial check for the LegacyBidirectionalIterator named requirement + static_assert(std::is_base_of::value + && std::is_base_of::iterator_category>::value, + "basic_json iterator assumes array and object type iterators satisfy the LegacyBidirectionalIterator named requirement."); public: - /// The std::iterator class template (used as a base class to provide typedefs) is deprecated in C++17. /// The C++ Standard has never required user-defined iterators to derive from std::iterator. /// A user-defined iterator should provide publicly accessible typedefs named @@ -73,8 +86,10 @@ class iter_impl typename BasicJsonType::const_reference, typename BasicJsonType::reference>::type; - /// default constructor iter_impl() = default; + ~iter_impl() = default; + iter_impl(iter_impl&&) noexcept = default; + iter_impl& operator=(iter_impl&&) noexcept = default; /*! @brief constructor for a given JSON instance @@ -86,7 +101,7 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { @@ -100,6 +115,14 @@ class iter_impl break; } + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { m_it.primitive_iterator = primitive_iterator_t(); @@ -136,8 +159,11 @@ class iter_impl */ iter_impl& operator=(const iter_impl& other) noexcept { - m_object = other.m_object; - m_it = other.m_it; + if (&other != this) + { + m_object = other.m_object; + m_it = other.m_it; + } return *this; } @@ -156,14 +182,14 @@ class iter_impl @return const/non-const iterator @note It is not checked whether @a other is initialized. */ - iter_impl& operator=(const iter_impl::type>& other) noexcept + iter_impl& operator=(const iter_impl::type>& other) noexcept // NOLINT(cert-oop54-cpp) { m_object = other.m_object; m_it = other.m_it; return *this; } - private: + JSON_PRIVATE_UNLESS_TESTED: /*! @brief set the iterator to the first value @pre The iterator is initialized; i.e. `m_object != nullptr`. @@ -172,17 +198,17 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { - m_it.object_iterator = m_object->m_value.object->begin(); + m_it.object_iterator = m_object->m_data.m_value.object->begin(); break; } case value_t::array: { - m_it.array_iterator = m_object->m_value.array->begin(); + m_it.array_iterator = m_object->m_data.m_value.array->begin(); break; } @@ -193,6 +219,13 @@ class iter_impl break; } + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { m_it.primitive_iterator.set_begin(); @@ -209,20 +242,28 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { - m_it.object_iterator = m_object->m_value.object->end(); + m_it.object_iterator = m_object->m_data.m_value.object->end(); break; } case value_t::array: { - m_it.array_iterator = m_object->m_value.array->end(); + m_it.array_iterator = m_object->m_data.m_value.array->end(); break; } + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { m_it.primitive_iterator.set_end(); @@ -240,23 +281,30 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { - JSON_ASSERT(m_it.object_iterator != m_object->m_value.object->end()); + JSON_ASSERT(m_it.object_iterator != m_object->m_data.m_value.object->end()); return m_it.object_iterator->second; } case value_t::array: { - JSON_ASSERT(m_it.array_iterator != m_object->m_value.array->end()); + JSON_ASSERT(m_it.array_iterator != m_object->m_data.m_value.array->end()); return *m_it.array_iterator; } case value_t::null: - JSON_THROW(invalid_iterator::create(214, "cannot get value")); - + JSON_THROW(invalid_iterator::create(214, "cannot get value", m_object)); + + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { if (JSON_HEDLEY_LIKELY(m_it.primitive_iterator.is_begin())) @@ -264,7 +312,7 @@ class iter_impl return *m_object; } - JSON_THROW(invalid_iterator::create(214, "cannot get value")); + JSON_THROW(invalid_iterator::create(214, "cannot get value", m_object)); } } } @@ -277,20 +325,28 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { - JSON_ASSERT(m_it.object_iterator != m_object->m_value.object->end()); + JSON_ASSERT(m_it.object_iterator != m_object->m_data.m_value.object->end()); return &(m_it.object_iterator->second); } case value_t::array: { - JSON_ASSERT(m_it.array_iterator != m_object->m_value.array->end()); + JSON_ASSERT(m_it.array_iterator != m_object->m_data.m_value.array->end()); return &*m_it.array_iterator; } + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { if (JSON_HEDLEY_LIKELY(m_it.primitive_iterator.is_begin())) @@ -298,7 +354,7 @@ class iter_impl return m_object; } - JSON_THROW(invalid_iterator::create(214, "cannot get value")); + JSON_THROW(invalid_iterator::create(214, "cannot get value", m_object)); } } } @@ -307,7 +363,7 @@ class iter_impl @brief post-increment (it++) @pre The iterator is initialized; i.e. `m_object != nullptr`. */ - iter_impl const operator++(int) + iter_impl operator++(int)& // NOLINT(cert-dcl21-cpp) { auto result = *this; ++(*this); @@ -322,7 +378,7 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { @@ -336,6 +392,14 @@ class iter_impl break; } + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { ++m_it.primitive_iterator; @@ -350,7 +414,7 @@ class iter_impl @brief post-decrement (it--) @pre The iterator is initialized; i.e. `m_object != nullptr`. */ - iter_impl const operator--(int) + iter_impl operator--(int)& // NOLINT(cert-dcl21-cpp) { auto result = *this; --(*this); @@ -365,7 +429,7 @@ class iter_impl { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: { @@ -379,6 +443,14 @@ class iter_impl break; } + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { --m_it.primitive_iterator; @@ -390,20 +462,25 @@ class iter_impl } /*! - @brief comparison: equal - @pre The iterator is initialized; i.e. `m_object != nullptr`. + @brief comparison: equal + @pre (1) Both iterators are initialized to point to the same object, or (2) both iterators are value-initialized. */ - bool operator==(const iter_impl& other) const + template < typename IterImpl, detail::enable_if_t < (std::is_same::value || std::is_same::value), std::nullptr_t > = nullptr > + bool operator==(const IterImpl& other) const { // if objects are not the same, the comparison is undefined if (JSON_HEDLEY_UNLIKELY(m_object != other.m_object)) { - JSON_THROW(invalid_iterator::create(212, "cannot compare iterators of different containers")); + JSON_THROW(invalid_iterator::create(212, "cannot compare iterators of different containers", m_object)); } - JSON_ASSERT(m_object != nullptr); + // value-initialized forward iterators can be compared, and must compare equal to other value-initialized iterators of the same type #4493 + if (m_object == nullptr) + { + return true; + } - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: return (m_it.object_iterator == other.m_it.object_iterator); @@ -411,50 +488,72 @@ class iter_impl case value_t::array: return (m_it.array_iterator == other.m_it.array_iterator); + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: return (m_it.primitive_iterator == other.m_it.primitive_iterator); } } /*! - @brief comparison: not equal - @pre The iterator is initialized; i.e. `m_object != nullptr`. + @brief comparison: not equal + @pre (1) Both iterators are initialized to point to the same object, or (2) both iterators are value-initialized. */ - bool operator!=(const iter_impl& other) const + template < typename IterImpl, detail::enable_if_t < (std::is_same::value || std::is_same::value), std::nullptr_t > = nullptr > + bool operator!=(const IterImpl& other) const { return !operator==(other); } /*! - @brief comparison: smaller - @pre The iterator is initialized; i.e. `m_object != nullptr`. + @brief comparison: smaller + @pre (1) Both iterators are initialized to point to the same object, or (2) both iterators are value-initialized. */ bool operator<(const iter_impl& other) const { // if objects are not the same, the comparison is undefined if (JSON_HEDLEY_UNLIKELY(m_object != other.m_object)) { - JSON_THROW(invalid_iterator::create(212, "cannot compare iterators of different containers")); + JSON_THROW(invalid_iterator::create(212, "cannot compare iterators of different containers", m_object)); } - JSON_ASSERT(m_object != nullptr); + // value-initialized forward iterators can be compared, and must compare equal to other value-initialized iterators of the same type #4493 + if (m_object == nullptr) + { + // the iterators are both value-initialized and are to be considered equal, but this function checks for smaller, so we return false + return false; + } - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: - JSON_THROW(invalid_iterator::create(213, "cannot compare order of object iterators")); + JSON_THROW(invalid_iterator::create(213, "cannot compare order of object iterators", m_object)); case value_t::array: return (m_it.array_iterator < other.m_it.array_iterator); + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: return (m_it.primitive_iterator < other.m_it.primitive_iterator); } } /*! - @brief comparison: less than or equal - @pre The iterator is initialized; i.e. `m_object != nullptr`. + @brief comparison: less than or equal + @pre (1) Both iterators are initialized to point to the same object, or (2) both iterators are value-initialized. */ bool operator<=(const iter_impl& other) const { @@ -462,8 +561,8 @@ class iter_impl } /*! - @brief comparison: greater than - @pre The iterator is initialized; i.e. `m_object != nullptr`. + @brief comparison: greater than + @pre (1) Both iterators are initialized to point to the same object, or (2) both iterators are value-initialized. */ bool operator>(const iter_impl& other) const { @@ -471,8 +570,8 @@ class iter_impl } /*! - @brief comparison: greater than or equal - @pre The iterator is initialized; i.e. `m_object != nullptr`. + @brief comparison: greater than or equal + @pre (1) The iterator is initialized; i.e. `m_object != nullptr`, or (2) both iterators are value-initialized. */ bool operator>=(const iter_impl& other) const { @@ -480,17 +579,17 @@ class iter_impl } /*! - @brief add to iterator + @brief add to iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ iter_impl& operator+=(difference_type i) { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: - JSON_THROW(invalid_iterator::create(209, "cannot use offsets with object iterators")); + JSON_THROW(invalid_iterator::create(209, "cannot use offsets with object iterators", m_object)); case value_t::array: { @@ -498,6 +597,14 @@ class iter_impl break; } + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { m_it.primitive_iterator += i; @@ -509,7 +616,7 @@ class iter_impl } /*! - @brief subtract from iterator + @brief subtract from iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ iter_impl& operator-=(difference_type i) @@ -518,7 +625,7 @@ class iter_impl } /*! - @brief add to iterator + @brief add to iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ iter_impl operator+(difference_type i) const @@ -529,7 +636,7 @@ class iter_impl } /*! - @brief addition of distance and iterator + @brief addition of distance and iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ friend iter_impl operator+(difference_type i, const iter_impl& it) @@ -540,7 +647,7 @@ class iter_impl } /*! - @brief subtract from iterator + @brief subtract from iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ iter_impl operator-(difference_type i) const @@ -551,45 +658,60 @@ class iter_impl } /*! - @brief return difference + @brief return difference @pre The iterator is initialized; i.e. `m_object != nullptr`. */ difference_type operator-(const iter_impl& other) const { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: - JSON_THROW(invalid_iterator::create(209, "cannot use offsets with object iterators")); + JSON_THROW(invalid_iterator::create(209, "cannot use offsets with object iterators", m_object)); case value_t::array: return m_it.array_iterator - other.m_it.array_iterator; + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: return m_it.primitive_iterator - other.m_it.primitive_iterator; } } /*! - @brief access to successor + @brief access to successor @pre The iterator is initialized; i.e. `m_object != nullptr`. */ reference operator[](difference_type n) const { JSON_ASSERT(m_object != nullptr); - switch (m_object->m_type) + switch (m_object->m_data.m_type) { case value_t::object: - JSON_THROW(invalid_iterator::create(208, "cannot use operator[] for object iterators")); + JSON_THROW(invalid_iterator::create(208, "cannot use operator[] for object iterators", m_object)); case value_t::array: return *std::next(m_it.array_iterator, n); case value_t::null: - JSON_THROW(invalid_iterator::create(214, "cannot get value")); - + JSON_THROW(invalid_iterator::create(214, "cannot get value", m_object)); + + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: { if (JSON_HEDLEY_LIKELY(m_it.primitive_iterator.get_value() == -n)) @@ -597,13 +719,13 @@ class iter_impl return *m_object; } - JSON_THROW(invalid_iterator::create(214, "cannot get value")); + JSON_THROW(invalid_iterator::create(214, "cannot get value", m_object)); } } } /*! - @brief return the key of an object iterator + @brief return the key of an object iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ const typename object_t::key_type& key() const @@ -615,11 +737,11 @@ class iter_impl return m_it.object_iterator->first; } - JSON_THROW(invalid_iterator::create(207, "cannot use key() for non-object iterators")); + JSON_THROW(invalid_iterator::create(207, "cannot use key() for non-object iterators", m_object)); } /*! - @brief return the value of an iterator + @brief return the value of an iterator @pre The iterator is initialized; i.e. `m_object != nullptr`. */ reference value() const @@ -627,11 +749,12 @@ class iter_impl return operator*(); } - private: + JSON_PRIVATE_UNLESS_TESTED: /// associated JSON instance pointer m_object = nullptr; /// the actual iterator of the associated instance internal_iterator::type> m_it {}; }; -} // namespace detail -}} // namespace nlohmann::vt + +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/iterators/iteration_proxy.hpp b/lib/json/include/nlohmann-vt/detail/iterators/iteration_proxy.hpp index 062e73d022..fe207e35e7 100644 --- a/lib/json/include/nlohmann-vt/detail/iterators/iteration_proxy.hpp +++ b/lib/json/include/nlohmann-vt/detail/iterators/iteration_proxy.hpp @@ -1,37 +1,44 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // size_t -#include // input_iterator_tag -#include // string, to_string +#include // forward_iterator_tag #include // tuple_size, get, tuple_element +#include // move + +#if JSON_HAS_RANGES + #include // enable_borrowed_range +#endif +#include #include +#include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { -template -void int_to_string( string_type& target, std::size_t value ) -{ - // For ADL - using std::to_string; - target = to_string(value); -} + template class iteration_proxy_value { public: using difference_type = std::ptrdiff_t; using value_type = iteration_proxy_value; - using pointer = value_type * ; - using reference = value_type & ; - using iterator_category = std::input_iterator_tag; + using pointer = value_type *; + using reference = value_type &; + using iterator_category = std::forward_iterator_tag; using string_type = typename std::remove_cv< typename std::remove_reference().key() ) >::type >::type; private: /// the iterator - IteratorType anchor; + IteratorType anchor{}; /// an index for arrays (used to create key names) std::size_t array_index = 0; /// last stringified array index @@ -39,13 +46,30 @@ template class iteration_proxy_value /// a string representation of the array index mutable string_type array_index_str = "0"; /// an empty string (to return a reference for primitive values) - const string_type empty_str = ""; + string_type empty_str{}; public: - explicit iteration_proxy_value(IteratorType it) noexcept : anchor(it) {} + explicit iteration_proxy_value() = default; + explicit iteration_proxy_value(IteratorType it, std::size_t array_index_ = 0) + noexcept(std::is_nothrow_move_constructible::value + && std::is_nothrow_default_constructible::value) + : anchor(std::move(it)) + , array_index(array_index_) + {} + + iteration_proxy_value(iteration_proxy_value const&) = default; + iteration_proxy_value& operator=(iteration_proxy_value const&) = default; + // older GCCs are a bit fussy and require explicit noexcept specifiers on defaulted functions + iteration_proxy_value(iteration_proxy_value&&) + noexcept(std::is_nothrow_move_constructible::value + && std::is_nothrow_move_constructible::value) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor,cppcoreguidelines-noexcept-move-operations) + iteration_proxy_value& operator=(iteration_proxy_value&&) + noexcept(std::is_nothrow_move_assignable::value + && std::is_nothrow_move_assignable::value) = default; // NOLINT(hicpp-noexcept-move,performance-noexcept-move-constructor,cppcoreguidelines-noexcept-move-operations) + ~iteration_proxy_value() = default; /// dereference operator (needed for range-based for) - iteration_proxy_value& operator*() + const iteration_proxy_value& operator*() const { return *this; } @@ -59,6 +83,14 @@ template class iteration_proxy_value return *this; } + iteration_proxy_value operator++(int)& // NOLINT(cert-dcl21-cpp) + { + auto tmp = iteration_proxy_value(anchor, array_index); + ++anchor; + ++array_index; + return tmp; + } + /// equality operator (needed for InputIterator) bool operator==(const iteration_proxy_value& o) const { @@ -94,6 +126,14 @@ template class iteration_proxy_value return anchor.key(); // use an empty key for all primitive types + case value_t::null: + case value_t::string: + case value_t::boolean: + case value_t::number_integer: + case value_t::number_unsigned: + case value_t::number_float: + case value_t::binary: + case value_t::discarded: default: return empty_str; } @@ -111,25 +151,34 @@ template class iteration_proxy { private: /// the container to iterate - typename IteratorType::reference container; + typename IteratorType::pointer container = nullptr; public: + explicit iteration_proxy() = default; + /// construct iteration proxy from a container explicit iteration_proxy(typename IteratorType::reference cont) noexcept - : container(cont) {} + : container(&cont) {} + + iteration_proxy(iteration_proxy const&) = default; + iteration_proxy& operator=(iteration_proxy const&) = default; + iteration_proxy(iteration_proxy&&) noexcept = default; + iteration_proxy& operator=(iteration_proxy&&) noexcept = default; + ~iteration_proxy() = default; /// return iterator begin (needed for range-based for) - iteration_proxy_value begin() noexcept + iteration_proxy_value begin() const noexcept { - return iteration_proxy_value(container.begin()); + return iteration_proxy_value(container->begin()); } /// return iterator end (needed for range-based for) - iteration_proxy_value end() noexcept + iteration_proxy_value end() const noexcept { - return iteration_proxy_value(container.end()); + return iteration_proxy_value(container->end()); } }; + // Structured Bindings Support // For further reference see https://blog.tartanllama.xyz/structured-bindings/ // And see https://github.com/nlohmann/json/pull/1391 @@ -146,8 +195,9 @@ auto get(const nlohmann::detail::iteration_proxy_value& i) -> decl { return i.value(); } + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END // The Addition to the STD Namespace is required to add // Structured Bindings Support to the iteration_proxy_value class @@ -155,17 +205,18 @@ auto get(const nlohmann::detail::iteration_proxy_value& i) -> decl // And see https://github.com/nlohmann/json/pull/1391 namespace std { + #if defined(__clang__) // Fix: https://github.com/nlohmann/json/issues/1401 #pragma clang diagnostic push #pragma clang diagnostic ignored "-Wmismatched-tags" #endif template -class tuple_size<::nlohmann::detail::iteration_proxy_value> - : public std::integral_constant {}; +class tuple_size<::nlohmann::detail::iteration_proxy_value> // NOLINT(cert-dcl58-cpp) + : public std::integral_constant {}; template -class tuple_element> +class tuple_element> // NOLINT(cert-dcl58-cpp) { public: using type = decltype( @@ -175,4 +226,10 @@ class tuple_element> #if defined(__clang__) #pragma clang diagnostic pop #endif -} // namespace std + +} // namespace std + +#if JSON_HAS_RANGES + template + inline constexpr bool ::std::ranges::enable_borrowed_range<::nlohmann::detail::iteration_proxy> = true; +#endif diff --git a/lib/json/include/nlohmann-vt/detail/iterators/iterator_traits.hpp b/lib/json/include/nlohmann-vt/detail/iterators/iterator_traits.hpp index d43f6cd5a8..8160c7b559 100644 --- a/lib/json/include/nlohmann-vt/detail/iterators/iterator_traits.hpp +++ b/lib/json/include/nlohmann-vt/detail/iterators/iterator_traits.hpp @@ -1,14 +1,23 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // random_access_iterator_tag +#include #include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + template struct iterator_types {}; @@ -34,7 +43,7 @@ struct iterator_traits template struct iterator_traits < T, enable_if_t < !std::is_pointer::value >> - : iterator_types + : iterator_types { }; @@ -47,5 +56,6 @@ struct iterator_traits::value>> using pointer = T*; using reference = T&; }; -} // namespace detail -}} // namespace nlohmann::vt + +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/iterators/json_reverse_iterator.hpp b/lib/json/include/nlohmann-vt/detail/iterators/json_reverse_iterator.hpp index 135cf025bf..f49f3e2d8f 100644 --- a/lib/json/include/nlohmann-vt/detail/iterators/json_reverse_iterator.hpp +++ b/lib/json/include/nlohmann-vt/detail/iterators/json_reverse_iterator.hpp @@ -1,13 +1,23 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // ptrdiff_t #include // reverse_iterator #include // declval -namespace nlohmann { inline namespace vt -{ +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + ////////////////////// // reverse_iterator // ////////////////////// @@ -48,7 +58,7 @@ class json_reverse_iterator : public std::reverse_iterator explicit json_reverse_iterator(const base_iterator& it) noexcept : base_iterator(it) {} /// post-increment (it++) - json_reverse_iterator const operator++(int) + json_reverse_iterator operator++(int)& // NOLINT(cert-dcl21-cpp) { return static_cast(base_iterator::operator++(1)); } @@ -60,7 +70,7 @@ class json_reverse_iterator : public std::reverse_iterator } /// post-decrement (it--) - json_reverse_iterator const operator--(int) + json_reverse_iterator operator--(int)& // NOLINT(cert-dcl21-cpp) { return static_cast(base_iterator::operator--(1)); } @@ -115,5 +125,6 @@ class json_reverse_iterator : public std::reverse_iterator return it.operator * (); } }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/iterators/primitive_iterator.hpp b/lib/json/include/nlohmann-vt/detail/iterators/primitive_iterator.hpp index 3ddef50729..b6079f8cb0 100644 --- a/lib/json/include/nlohmann-vt/detail/iterators/primitive_iterator.hpp +++ b/lib/json/include/nlohmann-vt/detail/iterators/primitive_iterator.hpp @@ -1,12 +1,22 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // ptrdiff_t #include // numeric_limits -namespace nlohmann { inline namespace vt -{ +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + /* @brief an iterator for primitive JSON types @@ -23,6 +33,7 @@ class primitive_iterator_t static constexpr difference_type begin_value = 0; static constexpr difference_type end_value = begin_value + 1; + JSON_PRIVATE_UNLESS_TESTED: /// iterator as signed integer type difference_type m_it = (std::numeric_limits::min)(); @@ -84,7 +95,7 @@ class primitive_iterator_t return *this; } - primitive_iterator_t const operator++(int) noexcept + primitive_iterator_t operator++(int)& noexcept // NOLINT(cert-dcl21-cpp) { auto result = *this; ++m_it; @@ -97,7 +108,7 @@ class primitive_iterator_t return *this; } - primitive_iterator_t const operator--(int) noexcept + primitive_iterator_t operator--(int)& noexcept // NOLINT(cert-dcl21-cpp) { auto result = *this; --m_it; @@ -116,5 +127,6 @@ class primitive_iterator_t return *this; } }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/json_custom_base_class.hpp b/lib/json/include/nlohmann-vt/detail/json_custom_base_class.hpp new file mode 100644 index 0000000000..3c0a872db7 --- /dev/null +++ b/lib/json/include/nlohmann-vt/detail/json_custom_base_class.hpp @@ -0,0 +1,39 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + +#pragma once + +#include // conditional, is_same + +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN +namespace detail +{ + +/*! +@brief Default base class of the @ref basic_json class. + +So that the correct implementations of the copy / move ctors / assign operators +of @ref basic_json do not require complex case distinctions +(no base class / custom base class used as customization point), +@ref basic_json always has a base class. +By default, this class is used because it is empty and thus has no effect +on the behavior of @ref basic_json. +*/ +struct json_default_base {}; + +template +using json_base_class = typename std::conditional < + std::is_same::value, + json_default_base, + T + >::type; + +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/json_pointer.hpp b/lib/json/include/nlohmann-vt/detail/json_pointer.hpp index 1ffedbaa2b..7b1682bd50 100644 --- a/lib/json/include/nlohmann-vt/detail/json_pointer.hpp +++ b/lib/json/include/nlohmann-vt/detail/json_pointer.hpp @@ -1,7 +1,20 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // all_of #include // isdigit +#include // errno, ERANGE +#include // strtoull +#ifndef JSON_NO_IO + #include // ostream +#endif // JSON_NO_IO #include // max #include // accumulate #include // string @@ -10,89 +23,78 @@ #include #include +#include +#include #include -namespace nlohmann { inline namespace vt -{ -template +NLOHMANN_JSON_NAMESPACE_BEGIN + +/// @brief JSON Pointer defines a string syntax for identifying a specific value within a JSON document +/// @sa https://json.nlohmann.me/api/json_pointer/ +template class json_pointer { // allow basic_json to access private members NLOHMANN_BASIC_JSON_TPL_DECLARATION friend class basic_json; - public: - /*! - @brief create JSON pointer - - Create a JSON pointer according to the syntax described in - [Section 3 of RFC6901](https://tools.ietf.org/html/rfc6901#section-3). - - @param[in] s string representing the JSON pointer; if omitted, the empty - string is assumed which references the whole JSON value + template + friend class json_pointer; - @throw parse_error.107 if the given JSON pointer @a s is nonempty and does - not begin with a slash (`/`); see example below + template + struct string_t_helper + { + using type = T; + }; - @throw parse_error.108 if a tilde (`~`) in the given JSON pointer @a s is - not followed by `0` (representing `~`) or `1` (representing `/`); see - example below + NLOHMANN_BASIC_JSON_TPL_DECLARATION + struct string_t_helper + { + using type = StringType; + }; - @liveexample{The example shows the construction several valid JSON pointers - as well as the exceptional behavior.,json_pointer} + public: + // for backwards compatibility accept BasicJsonType + using string_t = typename string_t_helper::type; - @since version 2.0.0 - */ - explicit json_pointer(const std::string& s = "") + /// @brief create JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/json_pointer/ + explicit json_pointer(const string_t& s = "") : reference_tokens(split(s)) {} - /*! - @brief return a string representation of the JSON pointer - - @invariant For each JSON pointer `ptr`, it holds: - @code {.cpp} - ptr == json_pointer(ptr.to_string()); - @endcode - - @return a string representation of the JSON pointer - - @liveexample{The example shows the result of `to_string`.,json_pointer__to_string} - - @since version 2.0.0 - */ - std::string to_string() const + /// @brief return a string representation of the JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/to_string/ + string_t to_string() const { return std::accumulate(reference_tokens.begin(), reference_tokens.end(), - std::string{}, - [](const std::string & a, const std::string & b) + string_t{}, + [](const string_t& a, const string_t& b) { - return a + "/" + escape(b); + return detail::concat(a, '/', detail::escape(b)); }); } - /// @copydoc to_string() - operator std::string() const + /// @brief return a string representation of the JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_string/ + JSON_HEDLEY_DEPRECATED_FOR(3.11.0, to_string()) + operator string_t() const { return to_string(); } - /*! - @brief append another JSON pointer at the end of this JSON pointer - - @param[in] ptr JSON pointer to append - @return JSON pointer with @a ptr appended - - @liveexample{The example shows the usage of `operator/=`.,json_pointer__operator_add} - - @complexity Linear in the length of @a ptr. - - @sa @ref operator/=(std::string) to append a reference token - @sa @ref operator/=(std::size_t) to append an array index - @sa @ref operator/(const json_pointer&, const json_pointer&) for a binary operator +#ifndef JSON_NO_IO + /// @brief write string representation of the JSON pointer to stream + /// @sa https://json.nlohmann.me/api/basic_json/operator_ltlt/ + friend std::ostream& operator<<(std::ostream& o, const json_pointer& ptr) + { + o << ptr.to_string(); + return o; + } +#endif - @since version 3.6.0 - */ + /// @brief append another JSON pointer at the end of this JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_slasheq/ json_pointer& operator/=(const json_pointer& ptr) { reference_tokens.insert(reference_tokens.end(), @@ -101,123 +103,45 @@ class json_pointer return *this; } - /*! - @brief append an unescaped reference token at the end of this JSON pointer - - @param[in] token reference token to append - @return JSON pointer with @a token appended without escaping @a token - - @liveexample{The example shows the usage of `operator/=`.,json_pointer__operator_add} - - @complexity Amortized constant. - - @sa @ref operator/=(const json_pointer&) to append a JSON pointer - @sa @ref operator/=(std::size_t) to append an array index - @sa @ref operator/(const json_pointer&, std::size_t) for a binary operator - - @since version 3.6.0 - */ - json_pointer& operator/=(std::string token) + /// @brief append an unescaped reference token at the end of this JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_slasheq/ + json_pointer& operator/=(string_t token) { push_back(std::move(token)); return *this; } - /*! - @brief append an array index at the end of this JSON pointer - - @param[in] array_idx array index to append - @return JSON pointer with @a array_idx appended - - @liveexample{The example shows the usage of `operator/=`.,json_pointer__operator_add} - - @complexity Amortized constant. - - @sa @ref operator/=(const json_pointer&) to append a JSON pointer - @sa @ref operator/=(std::string) to append a reference token - @sa @ref operator/(const json_pointer&, std::string) for a binary operator - - @since version 3.6.0 - */ + /// @brief append an array index at the end of this JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_slasheq/ json_pointer& operator/=(std::size_t array_idx) { return *this /= std::to_string(array_idx); } - /*! - @brief create a new JSON pointer by appending the right JSON pointer at the end of the left JSON pointer - - @param[in] lhs JSON pointer - @param[in] rhs JSON pointer - @return a new JSON pointer with @a rhs appended to @a lhs - - @liveexample{The example shows the usage of `operator/`.,json_pointer__operator_add_binary} - - @complexity Linear in the length of @a lhs and @a rhs. - - @sa @ref operator/=(const json_pointer&) to append a JSON pointer - - @since version 3.6.0 - */ + /// @brief create a new JSON pointer by appending the right JSON pointer at the end of the left JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_slash/ friend json_pointer operator/(const json_pointer& lhs, const json_pointer& rhs) { return json_pointer(lhs) /= rhs; } - /*! - @brief create a new JSON pointer by appending the unescaped token at the end of the JSON pointer - - @param[in] ptr JSON pointer - @param[in] token reference token - @return a new JSON pointer with unescaped @a token appended to @a ptr - - @liveexample{The example shows the usage of `operator/`.,json_pointer__operator_add_binary} - - @complexity Linear in the length of @a ptr. - - @sa @ref operator/=(std::string) to append a reference token - - @since version 3.6.0 - */ - friend json_pointer operator/(const json_pointer& ptr, std::string token) + /// @brief create a new JSON pointer by appending the unescaped token at the end of the JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_slash/ + friend json_pointer operator/(const json_pointer& lhs, string_t token) // NOLINT(performance-unnecessary-value-param) { - return json_pointer(ptr) /= std::move(token); + return json_pointer(lhs) /= std::move(token); } - /*! - @brief create a new JSON pointer by appending the array-index-token at the end of the JSON pointer - - @param[in] ptr JSON pointer - @param[in] array_idx array index - @return a new JSON pointer with @a array_idx appended to @a ptr - - @liveexample{The example shows the usage of `operator/`.,json_pointer__operator_add_binary} - - @complexity Linear in the length of @a ptr. - - @sa @ref operator/=(std::size_t) to append an array index - - @since version 3.6.0 - */ - friend json_pointer operator/(const json_pointer& ptr, std::size_t array_idx) + /// @brief create a new JSON pointer by appending the array-index-token at the end of the JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/operator_slash/ + friend json_pointer operator/(const json_pointer& lhs, std::size_t array_idx) { - return json_pointer(ptr) /= array_idx; + return json_pointer(lhs) /= array_idx; } - /*! - @brief returns the parent of this JSON pointer - - @return parent of this JSON pointer; in case this JSON pointer is the root, - the root itself is returned - - @complexity Linear in the length of the JSON pointer. - - @liveexample{The example shows the result of `parent_pointer` for different - JSON Pointers.,json_pointer__parent_pointer} - - @since version 3.6.0 - */ + /// @brief returns the parent of this JSON pointer + /// @sa https://json.nlohmann.me/api/json_pointer/parent_pointer/ json_pointer parent_pointer() const { if (empty()) @@ -230,90 +154,46 @@ class json_pointer return res; } - /*! - @brief remove last reference token - - @pre not `empty()` - - @liveexample{The example shows the usage of `pop_back`.,json_pointer__pop_back} - - @complexity Constant. - - @throw out_of_range.405 if JSON pointer has no parent - - @since version 3.6.0 - */ + /// @brief remove last reference token + /// @sa https://json.nlohmann.me/api/json_pointer/pop_back/ void pop_back() { if (JSON_HEDLEY_UNLIKELY(empty())) { - JSON_THROW(detail::out_of_range::create(405, "JSON pointer has no parent")); + JSON_THROW(detail::out_of_range::create(405, "JSON pointer has no parent", nullptr)); } reference_tokens.pop_back(); } - /*! - @brief return last reference token - - @pre not `empty()` - @return last reference token - - @liveexample{The example shows the usage of `back`.,json_pointer__back} - - @complexity Constant. - - @throw out_of_range.405 if JSON pointer has no parent - - @since version 3.6.0 - */ - const std::string& back() const + /// @brief return last reference token + /// @sa https://json.nlohmann.me/api/json_pointer/back/ + const string_t& back() const { if (JSON_HEDLEY_UNLIKELY(empty())) { - JSON_THROW(detail::out_of_range::create(405, "JSON pointer has no parent")); + JSON_THROW(detail::out_of_range::create(405, "JSON pointer has no parent", nullptr)); } return reference_tokens.back(); } - /*! - @brief append an unescaped token at the end of the reference pointer - - @param[in] token token to add - - @complexity Amortized constant. - - @liveexample{The example shows the result of `push_back` for different - JSON Pointers.,json_pointer__push_back} - - @since version 3.6.0 - */ - void push_back(const std::string& token) + /// @brief append an unescaped token at the end of the reference pointer + /// @sa https://json.nlohmann.me/api/json_pointer/push_back/ + void push_back(const string_t& token) { reference_tokens.push_back(token); } - /// @copydoc push_back(const std::string&) - void push_back(std::string&& token) + /// @brief append an unescaped token at the end of the reference pointer + /// @sa https://json.nlohmann.me/api/json_pointer/push_back/ + void push_back(string_t&& token) { reference_tokens.push_back(std::move(token)); } - /*! - @brief return whether pointer points to the root document - - @return true iff the JSON pointer points to the root document - - @complexity Constant. - - @exceptionsafety No-throw guarantee: this function never throws exceptions. - - @liveexample{The example shows the result of `empty` for different JSON - Pointers.,json_pointer__empty} - - @since version 3.6.0 - */ + /// @brief return whether pointer points to the root document + /// @sa https://json.nlohmann.me/api/json_pointer/empty/ bool empty() const noexcept { return reference_tokens.empty(); @@ -330,56 +210,50 @@ class json_pointer @throw out_of_range.404 if string @a s could not be converted to an integer @throw out_of_range.410 if an array index exceeds size_type */ - static typename BasicJsonType::size_type array_index(const std::string& s) + template + static typename BasicJsonType::size_type array_index(const string_t& s) { using size_type = typename BasicJsonType::size_type; // error condition (cf. RFC 6901, Sect. 4) if (JSON_HEDLEY_UNLIKELY(s.size() > 1 && s[0] == '0')) { - JSON_THROW(detail::parse_error::create(106, 0, - "array index '" + s + - "' must not begin with '0'")); + JSON_THROW(detail::parse_error::create(106, 0, detail::concat("array index '", s, "' must not begin with '0'"), nullptr)); } // error condition (cf. RFC 6901, Sect. 4) if (JSON_HEDLEY_UNLIKELY(s.size() > 1 && !(s[0] >= '1' && s[0] <= '9'))) { - JSON_THROW(detail::parse_error::create(109, 0, "array index '" + s + "' is not a number")); + JSON_THROW(detail::parse_error::create(109, 0, detail::concat("array index '", s, "' is not a number"), nullptr)); } - std::size_t processed_chars = 0; - unsigned long long res = 0; - JSON_TRY + const char* p = s.c_str(); + char* p_end = nullptr; // NOLINT(misc-const-correctness) + errno = 0; // strtoull doesn't reset errno + const unsigned long long res = std::strtoull(p, &p_end, 10); // NOLINT(runtime/int) + if (p == p_end // invalid input or empty string + || errno == ERANGE // out of range + || JSON_HEDLEY_UNLIKELY(static_cast(p_end - p) != s.size())) // incomplete read { - res = std::stoull(s, &processed_chars); - } - JSON_CATCH(std::out_of_range&) - { - JSON_THROW(detail::out_of_range::create(404, "unresolved reference token '" + s + "'")); - } - - // check if the string was completely read - if (JSON_HEDLEY_UNLIKELY(processed_chars != s.size())) - { - JSON_THROW(detail::out_of_range::create(404, "unresolved reference token '" + s + "'")); + JSON_THROW(detail::out_of_range::create(404, detail::concat("unresolved reference token '", s, "'"), nullptr)); } // only triggered on special platforms (like 32bit), see also // https://github.com/nlohmann/json/pull/2203 - if (res >= static_cast((std::numeric_limits::max)())) + if (res >= static_cast((std::numeric_limits::max)())) // NOLINT(runtime/int) { - JSON_THROW(detail::out_of_range::create(410, "array index " + s + " exceeds size_type")); // LCOV_EXCL_LINE + JSON_THROW(detail::out_of_range::create(410, detail::concat("array index ", s, " exceeds size_type"), nullptr)); // LCOV_EXCL_LINE } return static_cast(res); } + JSON_PRIVATE_UNLESS_TESTED: json_pointer top() const { if (JSON_HEDLEY_UNLIKELY(empty())) { - JSON_THROW(detail::out_of_range::create(405, "JSON pointer has no parent")); + JSON_THROW(detail::out_of_range::create(405, "JSON pointer has no parent", nullptr)); } json_pointer result = *this; @@ -387,6 +261,7 @@ class json_pointer return result; } + private: /*! @brief create and return a reference to the pointed to value @@ -395,9 +270,10 @@ class json_pointer @throw parse_error.109 if array index is not a number @throw type_error.313 if value cannot be unflattened */ + template BasicJsonType& get_and_create(BasicJsonType& j) const { - auto result = &j; + auto* result = &j; // in case no reference tokens exist, return a reference to the JSON value // j which will be overwritten by a primitive value @@ -430,7 +306,7 @@ class json_pointer case detail::value_t::array: { // create an entry in the array - result = &result->operator[](array_index(reference_token)); + result = &result->operator[](array_index(reference_token)); break; } @@ -440,8 +316,15 @@ class json_pointer an error situation, because primitive values may only occur as single value; that is, with an empty list of reference tokens. */ + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: - JSON_THROW(detail::type_error::create(313, "invalid value to unflatten")); + JSON_THROW(detail::type_error::create(313, "invalid value to unflatten", &j)); } } @@ -467,6 +350,7 @@ class json_pointer @throw parse_error.109 if an array index was not a number @throw out_of_range.404 if the JSON pointer can not be resolved */ + template BasicJsonType& get_unchecked(BasicJsonType* ptr) const { for (const auto& reference_token : reference_tokens) @@ -502,18 +386,26 @@ class json_pointer if (reference_token == "-") { // explicitly treat "-" as index beyond the end - ptr = &ptr->operator[](ptr->m_value.array->size()); + ptr = &ptr->operator[](ptr->m_data.m_value.array->size()); } else { // convert array index to number; unchecked access - ptr = &ptr->operator[](array_index(reference_token)); + ptr = &ptr->operator[](array_index(reference_token)); } break; } + case detail::value_t::null: + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: - JSON_THROW(detail::out_of_range::create(404, "unresolved reference token '" + reference_token + "'")); + JSON_THROW(detail::out_of_range::create(404, detail::concat("unresolved reference token '", reference_token, "'"), ptr)); } } @@ -526,6 +418,7 @@ class json_pointer @throw out_of_range.402 if the array index '-' is used @throw out_of_range.404 if the JSON pointer can not be resolved */ + template BasicJsonType& get_checked(BasicJsonType* ptr) const { for (const auto& reference_token : reference_tokens) @@ -544,18 +437,26 @@ class json_pointer if (JSON_HEDLEY_UNLIKELY(reference_token == "-")) { // "-" always fails the range check - JSON_THROW(detail::out_of_range::create(402, - "array index '-' (" + std::to_string(ptr->m_value.array->size()) + - ") is out of range")); + JSON_THROW(detail::out_of_range::create(402, detail::concat( + "array index '-' (", std::to_string(ptr->m_data.m_value.array->size()), + ") is out of range"), ptr)); } // note: at performs range check - ptr = &ptr->at(array_index(reference_token)); + ptr = &ptr->at(array_index(reference_token)); break; } + case detail::value_t::null: + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: - JSON_THROW(detail::out_of_range::create(404, "unresolved reference token '" + reference_token + "'")); + JSON_THROW(detail::out_of_range::create(404, detail::concat("unresolved reference token '", reference_token, "'"), ptr)); } } @@ -575,6 +476,7 @@ class json_pointer @throw out_of_range.402 if the array index '-' is used @throw out_of_range.404 if the JSON pointer can not be resolved */ + template const BasicJsonType& get_unchecked(const BasicJsonType* ptr) const { for (const auto& reference_token : reference_tokens) @@ -593,18 +495,24 @@ class json_pointer if (JSON_HEDLEY_UNLIKELY(reference_token == "-")) { // "-" cannot be used for const access - JSON_THROW(detail::out_of_range::create(402, - "array index '-' (" + std::to_string(ptr->m_value.array->size()) + - ") is out of range")); + JSON_THROW(detail::out_of_range::create(402, detail::concat("array index '-' (", std::to_string(ptr->m_data.m_value.array->size()), ") is out of range"), ptr)); } // use unchecked array access - ptr = &ptr->operator[](array_index(reference_token)); + ptr = &ptr->operator[](array_index(reference_token)); break; } + case detail::value_t::null: + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: - JSON_THROW(detail::out_of_range::create(404, "unresolved reference token '" + reference_token + "'")); + JSON_THROW(detail::out_of_range::create(404, detail::concat("unresolved reference token '", reference_token, "'"), ptr)); } } @@ -617,6 +525,7 @@ class json_pointer @throw out_of_range.402 if the array index '-' is used @throw out_of_range.404 if the JSON pointer can not be resolved */ + template const BasicJsonType& get_checked(const BasicJsonType* ptr) const { for (const auto& reference_token : reference_tokens) @@ -635,18 +544,26 @@ class json_pointer if (JSON_HEDLEY_UNLIKELY(reference_token == "-")) { // "-" always fails the range check - JSON_THROW(detail::out_of_range::create(402, - "array index '-' (" + std::to_string(ptr->m_value.array->size()) + - ") is out of range")); + JSON_THROW(detail::out_of_range::create(402, detail::concat( + "array index '-' (", std::to_string(ptr->m_data.m_value.array->size()), + ") is out of range"), ptr)); } // note: at performs range check - ptr = &ptr->at(array_index(reference_token)); + ptr = &ptr->at(array_index(reference_token)); break; } + case detail::value_t::null: + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: - JSON_THROW(detail::out_of_range::create(404, "unresolved reference token '" + reference_token + "'")); + JSON_THROW(detail::out_of_range::create(404, detail::concat("unresolved reference token '", reference_token, "'"), ptr)); } } @@ -657,6 +574,7 @@ class json_pointer @throw parse_error.106 if an array index begins with '0' @throw parse_error.109 if an array index was not a number */ + template bool contains(const BasicJsonType* ptr) const { for (const auto& reference_token : reference_tokens) @@ -704,7 +622,7 @@ class json_pointer } } - const auto idx = array_index(reference_token); + const auto idx = array_index(reference_token); if (idx >= ptr->size()) { // index out of range @@ -715,6 +633,14 @@ class json_pointer break; } + case detail::value_t::null: + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: { // we do not expect primitive values if there is still a @@ -737,9 +663,9 @@ class json_pointer @throw parse_error.107 if the pointer is not empty or begins with '/' @throw parse_error.108 if character '~' is not followed by '0' or '1' */ - static std::vector split(const std::string& reference_string) + static std::vector split(const string_t& reference_string) { - std::vector result; + std::vector result; // special case: empty reference string -> no reference tokens if (reference_string.empty()) @@ -750,9 +676,7 @@ class json_pointer // check if nonempty reference string begins with slash if (JSON_HEDLEY_UNLIKELY(reference_string[0] != '/')) { - JSON_THROW(detail::parse_error::create(107, 1, - "JSON pointer must be empty or begin with '/' - was: '" + - reference_string + "'")); + JSON_THROW(detail::parse_error::create(107, 1, detail::concat("JSON pointer must be empty or begin with '/' - was: '", reference_string, "'"), nullptr)); } // extract the reference tokens: @@ -763,11 +687,11 @@ class json_pointer std::size_t slash = reference_string.find_first_of('/', 1), // set the beginning of the first reference token start = 1; - // we can stop if start == 0 (if slash == std::string::npos) + // we can stop if start == 0 (if slash == string_t::npos) start != 0; // set the beginning of the next reference token - // (will eventually be 0 if slash == std::string::npos) - start = (slash == std::string::npos) ? 0 : slash + 1, + // (will eventually be 0 if slash == string_t::npos) + start = (slash == string_t::npos) ? 0 : slash + 1, // find next slash slash = reference_string.find_first_of('/', start)) { @@ -777,7 +701,7 @@ class json_pointer // check reference tokens are properly escaped for (std::size_t pos = reference_token.find_first_of('~'); - pos != std::string::npos; + pos != string_t::npos; pos = reference_token.find_first_of('~', pos + 1)) { JSON_ASSERT(reference_token[pos] == '~'); @@ -787,57 +711,19 @@ class json_pointer (reference_token[pos + 1] != '0' && reference_token[pos + 1] != '1'))) { - JSON_THROW(detail::parse_error::create(108, 0, "escape character '~' must be followed with '0' or '1'")); + JSON_THROW(detail::parse_error::create(108, 0, "escape character '~' must be followed with '0' or '1'", nullptr)); } } // finally, store the reference token - unescape(reference_token); + detail::unescape(reference_token); result.push_back(reference_token); } return result; } - /*! - @brief replace all occurrences of a substring by another string - - @param[in,out] s the string to manipulate; changed so that all - occurrences of @a f are replaced with @a t - @param[in] f the substring to replace with @a t - @param[in] t the string to replace @a f - - @pre The search string @a f must not be empty. **This precondition is - enforced with an assertion.** - - @since version 2.0.0 - */ - static void replace_substring(std::string& s, const std::string& f, - const std::string& t) - { - JSON_ASSERT(!f.empty()); - for (auto pos = s.find(f); // find first occurrence of f - pos != std::string::npos; // make sure f was found - s.replace(pos, f.size(), t), // replace with t, and - pos = s.find(f, pos + t.size())) // find next occurrence of f - {} - } - - /// escape "~" to "~0" and "/" to "~1" - static std::string escape(std::string s) - { - replace_substring(s, "~", "~0"); - replace_substring(s, "/", "~1"); - return s; - } - - /// unescape "~1" to tilde and "~0" to slash (order is important!) - static void unescape(std::string& s) - { - replace_substring(s, "~1", "/"); - replace_substring(s, "~0", "~"); - } - + private: /*! @param[in] reference_string the reference string to the current value @param[in] value the value to consider @@ -845,7 +731,8 @@ class json_pointer @note Empty objects or arrays are flattened to `null`. */ - static void flatten(const std::string& reference_string, + template + static void flatten(const string_t& reference_string, const BasicJsonType& value, BasicJsonType& result) { @@ -853,7 +740,7 @@ class json_pointer { case detail::value_t::array: { - if (value.m_value.array->empty()) + if (value.m_data.m_value.array->empty()) { // flatten empty array as null result[reference_string] = nullptr; @@ -861,10 +748,10 @@ class json_pointer else { // iterate array and use index as reference string - for (std::size_t i = 0; i < value.m_value.array->size(); ++i) + for (std::size_t i = 0; i < value.m_data.m_value.array->size(); ++i) { - flatten(reference_string + "/" + std::to_string(i), - value.m_value.array->operator[](i), result); + flatten(detail::concat(reference_string, '/', std::to_string(i)), + value.m_data.m_value.array->operator[](i), result); } } break; @@ -872,7 +759,7 @@ class json_pointer case detail::value_t::object: { - if (value.m_value.object->empty()) + if (value.m_data.m_value.object->empty()) { // flatten empty object as null result[reference_string] = nullptr; @@ -880,14 +767,22 @@ class json_pointer else { // iterate object and use keys as reference string - for (const auto& element : *value.m_value.object) + for (const auto& element : *value.m_data.m_value.object) { - flatten(reference_string + "/" + escape(element.first), element.second, result); + flatten(detail::concat(reference_string, '/', detail::escape(element.first)), element.second, result); } } break; } + case detail::value_t::null: + case detail::value_t::string: + case detail::value_t::boolean: + case detail::value_t::number_integer: + case detail::value_t::number_unsigned: + case detail::value_t::number_float: + case detail::value_t::binary: + case detail::value_t::discarded: default: { // add primitive value with its reference string @@ -907,22 +802,23 @@ class json_pointer @throw type_error.315 if object values are not primitive @throw type_error.313 if value cannot be unflattened */ + template static BasicJsonType unflatten(const BasicJsonType& value) { if (JSON_HEDLEY_UNLIKELY(!value.is_object())) { - JSON_THROW(detail::type_error::create(314, "only objects can be unflattened")); + JSON_THROW(detail::type_error::create(314, "only objects can be unflattened", &value)); } BasicJsonType result; // iterate the JSON object values - for (const auto& element : *value.m_value.object) + for (const auto& element : *value.m_data.m_value.object) { if (JSON_HEDLEY_UNLIKELY(!element.second.is_primitive())) { - JSON_THROW(detail::type_error::create(315, "values in object must be primitive")); + JSON_THROW(detail::type_error::create(315, "values in object must be primitive", &element.second)); } // assign value to reference pointed to by JSON pointer; Note that if @@ -935,41 +831,158 @@ class json_pointer return result; } - /*! - @brief compares two JSON pointers for equality - - @param[in] lhs JSON pointer to compare - @param[in] rhs JSON pointer to compare - @return whether @a lhs is equal to @a rhs - - @complexity Linear in the length of the JSON pointer - - @exceptionsafety No-throw guarantee: this function never throws exceptions. - */ - friend bool operator==(json_pointer const& lhs, - json_pointer const& rhs) noexcept + // can't use conversion operator because of ambiguity + json_pointer convert() const& { - return lhs.reference_tokens == rhs.reference_tokens; + json_pointer result; + result.reference_tokens = reference_tokens; + return result; } - /*! - @brief compares two JSON pointers for inequality + json_pointer convert()&& + { + json_pointer result; + result.reference_tokens = std::move(reference_tokens); + return result; + } - @param[in] lhs JSON pointer to compare - @param[in] rhs JSON pointer to compare - @return whether @a lhs is not equal @a rhs + public: +#if JSON_HAS_THREE_WAY_COMPARISON + /// @brief compares two JSON pointers for equality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_eq/ + template + bool operator==(const json_pointer& rhs) const noexcept + { + return reference_tokens == rhs.reference_tokens; + } - @complexity Linear in the length of the JSON pointer + /// @brief compares JSON pointer and string for equality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_eq/ + JSON_HEDLEY_DEPRECATED_FOR(3.11.2, operator==(json_pointer)) + bool operator==(const string_t& rhs) const + { + return *this == json_pointer(rhs); + } - @exceptionsafety No-throw guarantee: this function never throws exceptions. - */ - friend bool operator!=(json_pointer const& lhs, - json_pointer const& rhs) noexcept + /// @brief 3-way compares two JSON pointers + template + std::strong_ordering operator<=>(const json_pointer& rhs) const noexcept // *NOPAD* { - return !(lhs == rhs); + return reference_tokens <=> rhs.reference_tokens; // *NOPAD* } +#else + /// @brief compares two JSON pointers for equality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_eq/ + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator==(const json_pointer& lhs, + const json_pointer& rhs) noexcept; + + /// @brief compares JSON pointer and string for equality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_eq/ + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator==(const json_pointer& lhs, + const StringType& rhs); + + /// @brief compares string and JSON pointer for equality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_eq/ + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator==(const StringType& lhs, + const json_pointer& rhs); + + /// @brief compares two JSON pointers for inequality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_ne/ + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator!=(const json_pointer& lhs, + const json_pointer& rhs) noexcept; + + /// @brief compares JSON pointer and string for inequality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_ne/ + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator!=(const json_pointer& lhs, + const StringType& rhs); + + /// @brief compares string and JSON pointer for inequality + /// @sa https://json.nlohmann.me/api/json_pointer/operator_ne/ + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator!=(const StringType& lhs, + const json_pointer& rhs); + + /// @brief compares two JSON pointer for less-than + template + // NOLINTNEXTLINE(readability-redundant-declaration) + friend bool operator<(const json_pointer& lhs, + const json_pointer& rhs) noexcept; +#endif + private: /// the reference tokens - std::vector reference_tokens; + std::vector reference_tokens; }; -}} // namespace nlohmann::vt + +#if !JSON_HAS_THREE_WAY_COMPARISON +// functions cannot be defined inside class due to ODR violations +template +inline bool operator==(const json_pointer& lhs, + const json_pointer& rhs) noexcept +{ + return lhs.reference_tokens == rhs.reference_tokens; +} + +template::string_t> +JSON_HEDLEY_DEPRECATED_FOR(3.11.2, operator==(json_pointer, json_pointer)) +inline bool operator==(const json_pointer& lhs, + const StringType& rhs) +{ + return lhs == json_pointer(rhs); +} + +template::string_t> +JSON_HEDLEY_DEPRECATED_FOR(3.11.2, operator==(json_pointer, json_pointer)) +inline bool operator==(const StringType& lhs, + const json_pointer& rhs) +{ + return json_pointer(lhs) == rhs; +} + +template +inline bool operator!=(const json_pointer& lhs, + const json_pointer& rhs) noexcept +{ + return !(lhs == rhs); +} + +template::string_t> +JSON_HEDLEY_DEPRECATED_FOR(3.11.2, operator!=(json_pointer, json_pointer)) +inline bool operator!=(const json_pointer& lhs, + const StringType& rhs) +{ + return !(lhs == rhs); +} + +template::string_t> +JSON_HEDLEY_DEPRECATED_FOR(3.11.2, operator!=(json_pointer, json_pointer)) +inline bool operator!=(const StringType& lhs, + const json_pointer& rhs) +{ + return !(lhs == rhs); +} + +template +inline bool operator<(const json_pointer& lhs, + const json_pointer& rhs) noexcept +{ + return lhs.reference_tokens < rhs.reference_tokens; +} +#endif + +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/json_ref.hpp b/lib/json/include/nlohmann-vt/detail/json_ref.hpp index 74e042498f..82ab6a3bc3 100644 --- a/lib/json/include/nlohmann-vt/detail/json_ref.hpp +++ b/lib/json/include/nlohmann-vt/detail/json_ref.hpp @@ -1,14 +1,23 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include #include +#include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + template class json_ref { @@ -17,19 +26,14 @@ class json_ref json_ref(value_type&& value) : owned_value(std::move(value)) - , value_ref(&owned_value) - , is_rvalue(true) {} json_ref(const value_type& value) - : value_ref(const_cast(&value)) - , is_rvalue(false) + : value_ref(&value) {} json_ref(std::initializer_list init) : owned_value(init) - , value_ref(&owned_value) - , is_rvalue(true) {} template < @@ -37,12 +41,10 @@ class json_ref enable_if_t::value, int> = 0 > json_ref(Args && ... args) : owned_value(std::forward(args)...) - , value_ref(&owned_value) - , is_rvalue(true) {} // class should be movable only - json_ref(json_ref&&) = default; + json_ref(json_ref&&) noexcept = default; json_ref(const json_ref&) = delete; json_ref& operator=(const json_ref&) = delete; json_ref& operator=(json_ref&&) = delete; @@ -50,27 +52,27 @@ class json_ref value_type moved_or_copied() const { - if (is_rvalue) + if (value_ref == nullptr) { - return std::move(*value_ref); + return std::move(owned_value); } return *value_ref; } value_type const& operator*() const { - return *static_cast(value_ref); + return value_ref ? *value_ref : owned_value; } value_type const* operator->() const { - return static_cast(value_ref); + return &** this; } private: mutable value_type owned_value = nullptr; - value_type* value_ref = nullptr; - const bool is_rvalue = true; + value_type const* value_ref = nullptr; }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/macro_scope.hpp b/lib/json/include/nlohmann-vt/detail/macro_scope.hpp index d97d074576..bda504e7ec 100644 --- a/lib/json/include/nlohmann-vt/detail/macro_scope.hpp +++ b/lib/json/include/nlohmann-vt/detail/macro_scope.hpp @@ -1,11 +1,22 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once -#include // pair +#include // declval, pair +#include #include -// This file contains all internal macro definitions +// This file contains all internal macro definitions (except those affecting ABI) // You MUST include macro_unscope.hpp at the end of json.hpp to undef all of them +#include + // exclude unsupported compilers #if !defined(JSON_SKIP_UNSUPPORTED_COMPILER_CHECK) #if defined(__clang__) @@ -20,30 +31,141 @@ #endif // C++ language standard detection -#if (defined(__cplusplus) && __cplusplus >= 202002L) || (defined(_MSVC_LANG) && _MSVC_LANG >= 202002L) - #define JSON_HAS_CPP_20 - #define JSON_HAS_CPP_17 - #define JSON_HAS_CPP_14 -#elif (defined(__cplusplus) && __cplusplus >= 201703L) || (defined(_HAS_CXX17) && _HAS_CXX17 == 1) // fix for issue #464 - #define JSON_HAS_CPP_17 - #define JSON_HAS_CPP_14 -#elif (defined(__cplusplus) && __cplusplus >= 201402L) || (defined(_HAS_CXX14) && _HAS_CXX14 == 1) - #define JSON_HAS_CPP_14 +// if the user manually specified the used c++ version this is skipped +#if !defined(JSON_HAS_CPP_23) && !defined(JSON_HAS_CPP_20) && !defined(JSON_HAS_CPP_17) && !defined(JSON_HAS_CPP_14) && !defined(JSON_HAS_CPP_11) + #if (defined(__cplusplus) && __cplusplus > 202002L) || (defined(_MSVC_LANG) && _MSVC_LANG > 202002L) + #define JSON_HAS_CPP_23 + #define JSON_HAS_CPP_20 + #define JSON_HAS_CPP_17 + #define JSON_HAS_CPP_14 + #elif (defined(__cplusplus) && __cplusplus > 201703L) || (defined(_MSVC_LANG) && _MSVC_LANG > 201703L) + #define JSON_HAS_CPP_20 + #define JSON_HAS_CPP_17 + #define JSON_HAS_CPP_14 + #elif (defined(__cplusplus) && __cplusplus > 201402L) || (defined(_HAS_CXX17) && _HAS_CXX17 == 1) // fix for issue #464 + #define JSON_HAS_CPP_17 + #define JSON_HAS_CPP_14 + #elif (defined(__cplusplus) && __cplusplus > 201103L) || (defined(_HAS_CXX14) && _HAS_CXX14 == 1) + #define JSON_HAS_CPP_14 + #endif + // the cpp 11 flag is always specified because it is the minimal required version + #define JSON_HAS_CPP_11 +#endif + +#ifdef __has_include + #if __has_include() + #include + #endif +#endif + +#if !defined(JSON_HAS_FILESYSTEM) && !defined(JSON_HAS_EXPERIMENTAL_FILESYSTEM) + #ifdef JSON_HAS_CPP_17 + #if defined(__cpp_lib_filesystem) + #define JSON_HAS_FILESYSTEM 1 + #elif defined(__cpp_lib_experimental_filesystem) + #define JSON_HAS_EXPERIMENTAL_FILESYSTEM 1 + #elif !defined(__has_include) + #define JSON_HAS_EXPERIMENTAL_FILESYSTEM 1 + #elif __has_include() + #define JSON_HAS_FILESYSTEM 1 + #elif __has_include() + #define JSON_HAS_EXPERIMENTAL_FILESYSTEM 1 + #endif + + // std::filesystem does not work on MinGW GCC 8: https://sourceforge.net/p/mingw-w64/bugs/737/ + #if defined(__MINGW32__) && defined(__GNUC__) && __GNUC__ == 8 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #endif + + // no filesystem support before GCC 8: https://en.cppreference.com/w/cpp/compiler_support + #if defined(__GNUC__) && !defined(__clang__) && __GNUC__ < 8 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #endif + + // no filesystem support before Clang 7: https://en.cppreference.com/w/cpp/compiler_support + #if defined(__clang_major__) && __clang_major__ < 7 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #endif + + // no filesystem support before MSVC 19.14: https://en.cppreference.com/w/cpp/compiler_support + #if defined(_MSC_VER) && _MSC_VER < 1914 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #endif + + // no filesystem support before iOS 13 + #if defined(__IPHONE_OS_VERSION_MIN_REQUIRED) && __IPHONE_OS_VERSION_MIN_REQUIRED < 130000 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #endif + + // no filesystem support before macOS Catalina + #if defined(__MAC_OS_X_VERSION_MIN_REQUIRED) && __MAC_OS_X_VERSION_MIN_REQUIRED < 101500 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #endif + #endif #endif -// disable float-equal warnings on GCC/clang -#if defined(__clang__) || defined(__GNUC__) || defined(__GNUG__) - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wfloat-equal" +#ifndef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #define JSON_HAS_EXPERIMENTAL_FILESYSTEM 0 +#endif + +#ifndef JSON_HAS_FILESYSTEM + #define JSON_HAS_FILESYSTEM 0 +#endif + +#ifndef JSON_HAS_THREE_WAY_COMPARISON + #if defined(__cpp_impl_three_way_comparison) && __cpp_impl_three_way_comparison >= 201907L \ + && defined(__cpp_lib_three_way_comparison) && __cpp_lib_three_way_comparison >= 201907L + #define JSON_HAS_THREE_WAY_COMPARISON 1 + #else + #define JSON_HAS_THREE_WAY_COMPARISON 0 + #endif +#endif + +#ifndef JSON_HAS_RANGES + // ranges header shipping in GCC 11.1.0 (released 2021-04-27) has syntax error + #if defined(__GLIBCXX__) && __GLIBCXX__ == 20210427 + #define JSON_HAS_RANGES 0 + #elif defined(__cpp_lib_ranges) + #define JSON_HAS_RANGES 1 + #else + #define JSON_HAS_RANGES 0 + #endif +#endif + +#ifndef JSON_HAS_STATIC_RTTI + #if !defined(_HAS_STATIC_RTTI) || _HAS_STATIC_RTTI != 0 + #define JSON_HAS_STATIC_RTTI 1 + #else + #define JSON_HAS_STATIC_RTTI 0 + #endif +#endif + +#ifdef JSON_HAS_CPP_17 + #define JSON_INLINE_VARIABLE inline +#else + #define JSON_INLINE_VARIABLE +#endif + +#if JSON_HEDLEY_HAS_ATTRIBUTE(no_unique_address) + #define JSON_NO_UNIQUE_ADDRESS [[no_unique_address]] +#else + #define JSON_NO_UNIQUE_ADDRESS #endif // disable documentation warnings on clang #if defined(__clang__) - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wdocumentation" + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wdocumentation" + #pragma clang diagnostic ignored "-Wdocumentation-unknown-command" #endif -// allow to disable exceptions +// allow disabling exceptions #if (defined(__cpp_exceptions) || defined(__EXCEPTIONS) || defined(_CPPUNWIND)) && !defined(JSON_NOEXCEPTION) #define JSON_THROW(exception) throw exception #define JSON_TRY try @@ -77,12 +199,19 @@ #define JSON_INTERNAL_CATCH JSON_INTERNAL_CATCH_USER #endif -// allow to override assert +// allow overriding assert #if !defined(JSON_ASSERT) #include // assert #define JSON_ASSERT(x) assert(x) #endif +// allow to access some private functions (needed by the test suite) +#if defined(JSON_TESTS_PRIVATE) + #define JSON_PRIVATE_UNLESS_TESTED public +#else + #define JSON_PRIVATE_UNLESS_TESTED private +#endif + /*! @brief macro to briefly define a mapping between an enum and JSON @def NLOHMANN_JSON_SERIALIZE_ENUM @@ -92,7 +221,9 @@ template \ inline void to_json(BasicJsonType& j, const ENUM_TYPE& e) \ { \ + /* NOLINTNEXTLINE(modernize-type-traits) we use C++11 */ \ static_assert(std::is_enum::value, #ENUM_TYPE " must be an enum!"); \ + /* NOLINTNEXTLINE(modernize-avoid-c-arrays) we don't want to depend on */ \ static const std::pair m[] = __VA_ARGS__; \ auto it = std::find_if(std::begin(m), std::end(m), \ [e](const std::pair& ej_pair) -> bool \ @@ -104,7 +235,9 @@ template \ inline void from_json(const BasicJsonType& j, ENUM_TYPE& e) \ { \ + /* NOLINTNEXTLINE(modernize-type-traits) we use C++11 */ \ static_assert(std::is_enum::value, #ENUM_TYPE " must be an enum!"); \ + /* NOLINTNEXTLINE(modernize-avoid-c-arrays) we don't want to depend on */ \ static const std::pair m[] = __VA_ARGS__; \ auto it = std::find_if(std::begin(m), std::end(m), \ [&j](const std::pair& ej_pair) -> bool \ @@ -124,12 +257,13 @@ class NumberUnsignedType, class NumberFloatType, \ template class AllocatorType, \ template class JSONSerializer, \ - class BinaryType> + class BinaryType, \ + class CustomBaseClass> #define NLOHMANN_BASIC_JSON_TPL \ basic_json + AllocatorType, JSONSerializer, BinaryType, CustomBaseClass> // Macros to simplify conversion from/to types @@ -266,24 +400,181 @@ #define NLOHMANN_JSON_TO(v1) nlohmann_json_j[#v1] = nlohmann_json_t.v1; #define NLOHMANN_JSON_FROM(v1) nlohmann_json_j.at(#v1).get_to(nlohmann_json_t.v1); +#define NLOHMANN_JSON_FROM_WITH_DEFAULT(v1) nlohmann_json_t.v1 = !nlohmann_json_j.is_null() ? nlohmann_json_j.value(#v1, nlohmann_json_default_obj.v1) : nlohmann_json_default_obj.v1; /*! @brief macro @def NLOHMANN_DEFINE_TYPE_INTRUSIVE @since version 3.9.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_type_intrusive/ */ #define NLOHMANN_DEFINE_TYPE_INTRUSIVE(Type, ...) \ - friend void to_json(nlohmann::json& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ - friend void from_json(const nlohmann::json& nlohmann_json_j, Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM, __VA_ARGS__)) } + template::value, int> = 0> \ + friend void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + friend void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_TYPE_INTRUSIVE_WITH_DEFAULT +@since version 3.11.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_type_intrusive/ +*/ +#define NLOHMANN_DEFINE_TYPE_INTRUSIVE_WITH_DEFAULT(Type, ...) \ + template::value, int> = 0> \ + friend void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + friend void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { const Type nlohmann_json_default_obj{}; NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM_WITH_DEFAULT, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_TYPE_INTRUSIVE_ONLY_SERIALIZE +@since version 3.11.3 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_type_intrusive/ +*/ +#define NLOHMANN_DEFINE_TYPE_INTRUSIVE_ONLY_SERIALIZE(Type, ...) \ + template::value, int> = 0> \ + friend void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } /*! @brief macro @def NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE @since version 3.9.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_type_non_intrusive/ */ #define NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE(Type, ...) \ - inline void to_json(nlohmann::json& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ - inline void from_json(const nlohmann::json& nlohmann_json_j, Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM, __VA_ARGS__)) } + template::value, int> = 0> \ + void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE_WITH_DEFAULT +@since version 3.11.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_type_non_intrusive/ +*/ +#define NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE_WITH_DEFAULT(Type, ...) \ + template::value, int> = 0> \ + void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { const Type nlohmann_json_default_obj{}; NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM_WITH_DEFAULT, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE_ONLY_SERIALIZE +@since version 3.11.3 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_type_non_intrusive/ +*/ +#define NLOHMANN_DEFINE_TYPE_NON_INTRUSIVE_ONLY_SERIALIZE(Type, ...) \ + template::value, int> = 0> \ + void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE +@since version 3.12.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_derived_type/ +*/ +#define NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE(Type, BaseType, ...) \ + template::value, int> = 0> \ + friend void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { nlohmann::to_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + friend void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { nlohmann::from_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE_WITH_DEFAULT +@since version 3.12.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_derived_type/ +*/ +#define NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE_WITH_DEFAULT(Type, BaseType, ...) \ + template::value, int> = 0> \ + friend void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { nlohmann::to_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + friend void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { nlohmann::from_json(nlohmann_json_j, static_cast(nlohmann_json_t)); const Type nlohmann_json_default_obj{}; NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM_WITH_DEFAULT, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE_ONLY_SERIALIZE +@since version 3.12.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_derived_type/ +*/ +#define NLOHMANN_DEFINE_DERIVED_TYPE_INTRUSIVE_ONLY_SERIALIZE(Type, BaseType, ...) \ + template::value, int> = 0> \ + friend void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { nlohmann::to_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE +@since version 3.12.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_derived_type/ +*/ +#define NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE(Type, BaseType, ...) \ + template::value, int> = 0> \ + void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { nlohmann::to_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { nlohmann::from_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE_WITH_DEFAULT +@since version 3.12.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_derived_type/ +*/ +#define NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE_WITH_DEFAULT(Type, BaseType, ...) \ + template::value, int> = 0> \ + void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { nlohmann::to_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } \ + template::value, int> = 0> \ + void from_json(const BasicJsonType& nlohmann_json_j, Type& nlohmann_json_t) { nlohmann::from_json(nlohmann_json_j, static_cast(nlohmann_json_t)); const Type nlohmann_json_default_obj{}; NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_FROM_WITH_DEFAULT, __VA_ARGS__)) } + +/*! +@brief macro +@def NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE_ONLY_SERIALIZE +@since version 3.12.0 +@sa https://json.nlohmann.me/api/macros/nlohmann_define_derived_type/ +*/ +#define NLOHMANN_DEFINE_DERIVED_TYPE_NON_INTRUSIVE_ONLY_SERIALIZE(Type, BaseType, ...) \ + template::value, int> = 0> \ + void to_json(BasicJsonType& nlohmann_json_j, const Type& nlohmann_json_t) { nlohmann::to_json(nlohmann_json_j, static_cast(nlohmann_json_t)); NLOHMANN_JSON_EXPAND(NLOHMANN_JSON_PASTE(NLOHMANN_JSON_TO, __VA_ARGS__)) } + +// inspired from https://stackoverflow.com/a/26745591 +// allows calling any std function as if (e.g., with begin): +// using std::begin; begin(x); +// +// it allows using the detected idiom to retrieve the return type +// of such an expression +#define NLOHMANN_CAN_CALL_STD_FUNC_IMPL(std_name) \ + namespace detail { \ + using std::std_name; \ + \ + template \ + using result_of_##std_name = decltype(std_name(std::declval()...)); \ + } \ + \ + namespace detail2 { \ + struct std_name##_tag \ + { \ + }; \ + \ + template \ + std_name##_tag std_name(T&&...); \ + \ + template \ + using result_of_##std_name = decltype(std_name(std::declval()...)); \ + \ + template \ + struct would_call_std_##std_name \ + { \ + static constexpr auto const value = ::nlohmann::detail:: \ + is_detected_exact::value; \ + }; \ + } /* namespace detail2 */ \ + \ + template \ + struct would_call_std_##std_name : detail2::would_call_std_##std_name \ + { \ + } #ifndef JSON_USE_IMPLICIT_CONVERSIONS #define JSON_USE_IMPLICIT_CONVERSIONS 1 @@ -294,3 +585,11 @@ #else #define JSON_EXPLICIT explicit #endif + +#ifndef JSON_DISABLE_ENUM_SERIALIZATION + #define JSON_DISABLE_ENUM_SERIALIZATION 0 +#endif + +#ifndef JSON_USE_GLOBAL_UDLS + #define JSON_USE_GLOBAL_UDLS 1 +#endif diff --git a/lib/json/include/nlohmann-vt/detail/macro_unscope.hpp b/lib/json/include/nlohmann-vt/detail/macro_unscope.hpp index 05604a0f52..06806fee95 100644 --- a/lib/json/include/nlohmann-vt/detail/macro_unscope.hpp +++ b/lib/json/include/nlohmann-vt/detail/macro_unscope.hpp @@ -1,23 +1,46 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once -// restore GCC/clang diagnostic settings -#if defined(__clang__) || defined(__GNUC__) || defined(__GNUG__) - #pragma GCC diagnostic pop -#endif +// restore clang diagnostic settings #if defined(__clang__) - #pragma GCC diagnostic pop + #pragma clang diagnostic pop #endif // clean up #undef JSON_ASSERT #undef JSON_INTERNAL_CATCH -#undef JSON_CATCH #undef JSON_THROW -#undef JSON_TRY -#undef JSON_HAS_CPP_14 -#undef JSON_HAS_CPP_17 +#undef JSON_PRIVATE_UNLESS_TESTED #undef NLOHMANN_BASIC_JSON_TPL_DECLARATION #undef NLOHMANN_BASIC_JSON_TPL #undef JSON_EXPLICIT +#undef NLOHMANN_CAN_CALL_STD_FUNC_IMPL +#undef JSON_INLINE_VARIABLE +#undef JSON_NO_UNIQUE_ADDRESS +#undef JSON_DISABLE_ENUM_SERIALIZATION +#undef JSON_USE_GLOBAL_UDLS + +#ifndef JSON_TEST_KEEP_MACROS + #undef JSON_CATCH + #undef JSON_TRY + #undef JSON_HAS_CPP_11 + #undef JSON_HAS_CPP_14 + #undef JSON_HAS_CPP_17 + #undef JSON_HAS_CPP_20 + #undef JSON_HAS_CPP_23 + #undef JSON_HAS_FILESYSTEM + #undef JSON_HAS_EXPERIMENTAL_FILESYSTEM + #undef JSON_HAS_THREE_WAY_COMPARISON + #undef JSON_HAS_RANGES + #undef JSON_HAS_STATIC_RTTI + #undef JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON +#endif #include diff --git a/lib/json/include/nlohmann-vt/detail/meta/call_std/begin.hpp b/lib/json/include/nlohmann-vt/detail/meta/call_std/begin.hpp new file mode 100644 index 0000000000..238e08ef20 --- /dev/null +++ b/lib/json/include/nlohmann-vt/detail/meta/call_std/begin.hpp @@ -0,0 +1,17 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + +#pragma once + +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN + +NLOHMANN_CAN_CALL_STD_FUNC_IMPL(begin); + +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/meta/call_std/end.hpp b/lib/json/include/nlohmann-vt/detail/meta/call_std/end.hpp new file mode 100644 index 0000000000..1100580311 --- /dev/null +++ b/lib/json/include/nlohmann-vt/detail/meta/call_std/end.hpp @@ -0,0 +1,17 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + +#pragma once + +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN + +NLOHMANN_CAN_CALL_STD_FUNC_IMPL(end); + +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/meta/cpp_future.hpp b/lib/json/include/nlohmann-vt/detail/meta/cpp_future.hpp index e9cc3476e9..b059c15799 100644 --- a/lib/json/include/nlohmann-vt/detail/meta/cpp_future.hpp +++ b/lib/json/include/nlohmann-vt/detail/meta/cpp_future.hpp @@ -1,50 +1,150 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-FileCopyrightText: 2018 The Abseil Authors +// SPDX-License-Identifier: MIT + #pragma once +#include // array #include // size_t #include // conditional, enable_if, false_type, integral_constant, is_constructible, is_integral, is_same, remove_cv, remove_reference, true_type +#include // index_sequence, make_index_sequence, index_sequence_for -namespace nlohmann { inline namespace vt -{ +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + +template +using uncvref_t = typename std::remove_cv::type>::type; + +#ifdef JSON_HAS_CPP_14 + +// the following utilities are natively available in C++14 +using std::enable_if_t; +using std::index_sequence; +using std::make_index_sequence; +using std::index_sequence_for; + +#else + // alias templates to reduce boilerplate template using enable_if_t = typename std::enable_if::type; -template -using uncvref_t = typename std::remove_cv::type>::type; +// The following code is taken from https://github.com/abseil/abseil-cpp/blob/10cb35e459f5ecca5b2ff107635da0bfa41011b4/absl/utility/utility.h +// which is part of Google Abseil (https://github.com/abseil/abseil-cpp), licensed under the Apache License 2.0. -// implementation of C++14 index_sequence and affiliates -// source: https://stackoverflow.com/a/32223343 -template -struct index_sequence +//// START OF CODE FROM GOOGLE ABSEIL + +// integer_sequence +// +// Class template representing a compile-time integer sequence. An instantiation +// of `integer_sequence` has a sequence of integers encoded in its +// type through its template arguments (which is a common need when +// working with C++11 variadic templates). `absl::integer_sequence` is designed +// to be a drop-in replacement for C++14's `std::integer_sequence`. +// +// Example: +// +// template< class T, T... Ints > +// void user_function(integer_sequence); +// +// int main() +// { +// // user_function's `T` will be deduced to `int` and `Ints...` +// // will be deduced to `0, 1, 2, 3, 4`. +// user_function(make_integer_sequence()); +// } +template +struct integer_sequence { - using type = index_sequence; - using value_type = std::size_t; + using value_type = T; static constexpr std::size_t size() noexcept { return sizeof...(Ints); } }; -template -struct merge_and_renumber; +// index_sequence +// +// A helper template for an `integer_sequence` of `size_t`, +// `absl::index_sequence` is designed to be a drop-in replacement for C++14's +// `std::index_sequence`. +template +using index_sequence = integer_sequence; -template -struct merge_and_renumber, index_sequence> - : index_sequence < I1..., (sizeof...(I1) + I2)... > {}; +namespace utility_internal +{ -template -struct make_index_sequence - : merge_and_renumber < typename make_index_sequence < N / 2 >::type, - typename make_index_sequence < N - N / 2 >::type > {}; +template +struct Extend; -template<> struct make_index_sequence<0> : index_sequence<> {}; -template<> struct make_index_sequence<1> : index_sequence<0> {}; +// Note that SeqSize == sizeof...(Ints). It's passed explicitly for efficiency. +template +struct Extend, SeqSize, 0> +{ + using type = integer_sequence < T, Ints..., (Ints + SeqSize)... >; +}; -template +template +struct Extend, SeqSize, 1> +{ + using type = integer_sequence < T, Ints..., (Ints + SeqSize)..., 2 * SeqSize >; +}; + +// Recursion helper for 'make_integer_sequence'. +// 'Gen::type' is an alias for 'integer_sequence'. +template +struct Gen +{ + using type = + typename Extend < typename Gen < T, N / 2 >::type, N / 2, N % 2 >::type; +}; + +template +struct Gen +{ + using type = integer_sequence; +}; + +} // namespace utility_internal + +// Compile-time sequences of integers + +// make_integer_sequence +// +// This template alias is equivalent to +// `integer_sequence`, and is designed to be a drop-in +// replacement for C++14's `std::make_integer_sequence`. +template +using make_integer_sequence = typename utility_internal::Gen::type; + +// make_index_sequence +// +// This template alias is equivalent to `index_sequence<0, 1, ..., N-1>`, +// and is designed to be a drop-in replacement for C++14's +// `std::make_index_sequence`. +template +using make_index_sequence = make_integer_sequence; + +// index_sequence_for +// +// Converts a typename pack into an index sequence of the same length, and +// is designed to be a drop-in replacement for C++14's +// `std::index_sequence_for()` +template using index_sequence_for = make_index_sequence; +//// END OF CODE FROM GOOGLE ABSEIL + +#endif + // dispatch utility (taken from ranges-v3) template struct priority_tag : priority_tag < N - 1 > {}; template<> struct priority_tag<0> {}; @@ -53,10 +153,19 @@ template<> struct priority_tag<0> {}; template struct static_const { - static constexpr T value{}; + static JSON_INLINE_VARIABLE constexpr T value{}; }; -template -constexpr T static_const::value; +#ifndef JSON_HAS_CPP_17 + template + constexpr T static_const::value; +#endif + +template +constexpr std::array make_array(Args&& ... args) +{ + return std::array {{static_cast(std::forward(args))...}}; +} + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/meta/detected.hpp b/lib/json/include/nlohmann-vt/detail/meta/detected.hpp index 065f78adeb..6d3a1b326a 100644 --- a/lib/json/include/nlohmann-vt/detail/meta/detected.hpp +++ b/lib/json/include/nlohmann-vt/detail/meta/detected.hpp @@ -1,14 +1,22 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include #include -// https://en.cppreference.com/w/cpp/experimental/is_detected -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + +// https://en.cppreference.com/w/cpp/experimental/is_detected struct nonesuch { nonesuch() = delete; @@ -39,6 +47,9 @@ struct detector>, Op, Args...> template class Op, class... Args> using is_detected = typename detector::value_t; +template class Op, class... Args> +struct is_detected_lazy : is_detected { }; + template class Op, class... Args> using detected_t = typename detector::type; @@ -54,5 +65,6 @@ using is_detected_exact = std::is_same>; template class Op, class... Args> using is_detected_convertible = std::is_convertible, To>; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/meta/identity_tag.hpp b/lib/json/include/nlohmann-vt/detail/meta/identity_tag.hpp new file mode 100644 index 0000000000..e10edd6001 --- /dev/null +++ b/lib/json/include/nlohmann-vt/detail/meta/identity_tag.hpp @@ -0,0 +1,21 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + +#pragma once + +#include + +NLOHMANN_JSON_NAMESPACE_BEGIN +namespace detail +{ + +// dispatching helper struct +template struct identity_tag {}; + +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/meta/is_sax.hpp b/lib/json/include/nlohmann-vt/detail/meta/is_sax.hpp index f1d23bcdc2..cb76d3e1e7 100644 --- a/lib/json/include/nlohmann-vt/detail/meta/is_sax.hpp +++ b/lib/json/include/nlohmann-vt/detail/meta/is_sax.hpp @@ -1,16 +1,25 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // size_t #include // declval #include // string +#include #include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN namespace detail { + template using null_function_t = decltype(std::declval().null()); @@ -145,5 +154,6 @@ struct is_sax_static_asserts "Missing/invalid function: bool parse_error(std::size_t, const " "std::string&, const exception&)"); }; + } // namespace detail -}} // namespace nlohmann::vt +NLOHMANN_JSON_NAMESPACE_END diff --git a/lib/json/include/nlohmann-vt/detail/meta/std_fs.hpp b/lib/json/include/nlohmann-vt/detail/meta/std_fs.hpp new file mode 100644 index 0000000000..54bdfc365d --- /dev/null +++ b/lib/json/include/nlohmann-vt/detail/meta/std_fs.hpp @@ -0,0 +1,29 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + +#pragma once + +#include + +#if JSON_HAS_EXPERIMENTAL_FILESYSTEM +#include +NLOHMANN_JSON_NAMESPACE_BEGIN +namespace detail +{ +namespace std_fs = std::experimental::filesystem; +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END +#elif JSON_HAS_FILESYSTEM +#include // NOLINT(build/c++17) +NLOHMANN_JSON_NAMESPACE_BEGIN +namespace detail +{ +namespace std_fs = std::filesystem; +} // namespace detail +NLOHMANN_JSON_NAMESPACE_END +#endif diff --git a/lib/json/include/nlohmann-vt/detail/meta/type_traits.hpp b/lib/json/include/nlohmann-vt/detail/meta/type_traits.hpp index d9f1778e49..78f983ac4a 100644 --- a/lib/json/include/nlohmann-vt/detail/meta/type_traits.hpp +++ b/lib/json/include/nlohmann-vt/detail/meta/type_traits.hpp @@ -1,17 +1,28 @@ +// __ _____ _____ _____ +// __| | __| | | | JSON for Modern C++ +// | | |__ | | | | | | version 3.12.0 +// |_____|_____|_____|_|___| https://github.com/nlohmann/json +// +// SPDX-FileCopyrightText: 2013 - 2025 Niels Lohmann +// SPDX-License-Identifier: MIT + #pragma once #include // numeric_limits +#include // char_traits +#include // tuple #include // false_type, is_constructible, is_integral, is_same, true_type #include // declval #include #include +#include +#include #include #include #include -namespace nlohmann { inline namespace vt -{ +NLOHMANN_JSON_NAMESPACE_BEGIN /*! @brief detail namespace with internal helper functions @@ -22,6 +33,7 @@ implementations of some @ref basic_json methods, and meta-programming helpers. */ namespace detail { + ///////////// // helpers // ///////////// @@ -40,6 +52,16 @@ template struct is_basic_json : std::false_type {}; NLOHMANN_BASIC_JSON_TPL_DECLARATION struct is_basic_json : std::true_type {}; +// used by exceptions create() member functions +// true_type for pointer to possibly cv-qualified basic_json or std::nullptr_t +// false_type otherwise +template +struct is_basic_json_context : + std::integral_constant < bool, + is_basic_json::type>::type>::value + || std::is_same::value > +{}; + ////////////////////// // json_ref helpers // ////////////////////// @@ -78,9 +100,6 @@ using reference_t = typename T::reference; template using iterator_category_t = typename T::iterator_category; -template -using iterator_t = typename T::iterator; - template using to_json_function = decltype(T::to_json(std::declval()...)); @@ -105,8 +124,7 @@ struct is_getable }; template -struct has_from_json < BasicJsonType, T, - enable_if_t < !is_basic_json::value >> +struct has_from_json < BasicJsonType, T, enable_if_t < !is_basic_json::value >> { using serializer = typename BasicJsonType::template json_serializer; @@ -145,11 +163,133 @@ struct has_to_json < BasicJsonType, T, enable_if_t < !is_basic_json::value >> T>::value; }; +template +using detect_key_compare = typename T::key_compare; + +template +struct has_key_compare : std::integral_constant::value> {}; + +// obtains the actual object key comparator +template +struct actual_object_comparator +{ + using object_t = typename BasicJsonType::object_t; + using object_comparator_t = typename BasicJsonType::default_object_comparator_t; + using type = typename std::conditional < has_key_compare::value, + typename object_t::key_compare, object_comparator_t>::type; +}; + +template +using actual_object_comparator_t = typename actual_object_comparator::type; + +///////////////// +// char_traits // +///////////////// + +// Primary template of char_traits calls std char_traits +template +struct char_traits : std::char_traits +{}; + +// Explicitly define char traits for unsigned char since it is not standard +template<> +struct char_traits : std::char_traits +{ + using char_type = unsigned char; + using int_type = uint64_t; + + // Redefine to_int_type function + static int_type to_int_type(char_type c) noexcept + { + return static_cast(c); + } + + static char_type to_char_type(int_type i) noexcept + { + return static_cast(i); + } + + static constexpr int_type eof() noexcept + { + return static_cast(std::char_traits::eof()); + } +}; + +// Explicitly define char traits for signed char since it is not standard +template<> +struct char_traits : std::char_traits +{ + using char_type = signed char; + using int_type = uint64_t; + + // Redefine to_int_type function + static int_type to_int_type(char_type c) noexcept + { + return static_cast(c); + } + + static char_type to_char_type(int_type i) noexcept + { + return static_cast(i); + } + + static constexpr int_type eof() noexcept + { + return static_cast(std::char_traits::eof()); + } +}; /////////////////// // is_ functions // /////////////////// +// https://en.cppreference.com/w/cpp/types/conjunction +template struct conjunction : std::true_type { }; +template struct conjunction : B { }; +template +struct conjunction +: std::conditional(B::value), conjunction, B>::type {}; + +// https://en.cppreference.com/w/cpp/types/negation +template struct negation : std::integral_constant < bool, !B::value > { }; + +// Reimplementation of is_constructible and is_default_constructible, due to them being broken for +// std::pair and std::tuple until LWG 2367 fix (see https://cplusplus.github.io/LWG/lwg-defects.html#2367). +// This causes compile errors in e.g. clang 3.5 or gcc 4.9. +template +struct is_default_constructible : std::is_default_constructible {}; + +template +struct is_default_constructible> + : conjunction, is_default_constructible> {}; + +template +struct is_default_constructible> + : conjunction, is_default_constructible> {}; + +template +struct is_default_constructible> + : conjunction...> {}; + +template +struct is_default_constructible> + : conjunction...> {}; + +template +struct is_constructible : std::is_constructible {}; + +template +struct is_constructible> : is_default_constructible> {}; + +template +struct is_constructible> : is_default_constructible> {}; + +template +struct is_constructible> : is_default_constructible> {}; + +template +struct is_constructible> : is_default_constructible> {}; + template struct is_iterator_traits : std::false_type {}; @@ -168,7 +308,34 @@ struct is_iterator_traits> is_detected::value; }; -// source: https://stackoverflow.com/a/37193089/4116453 +template +struct is_range +{ + private: + using t_ref = typename std::add_lvalue_reference::type; + + using iterator = detected_t; + using sentinel = detected_t; + + // to be 100% correct, it should use https://en.cppreference.com/w/cpp/iterator/input_or_output_iterator + // and https://en.cppreference.com/w/cpp/iterator/sentinel_for + // but reimplementing these would be too much work, as a lot of other concepts are used underneath + static constexpr auto is_iterator_begin = + is_iterator_traits>::value; + + public: + static constexpr bool value = !std::is_same::value && !std::is_same::value && is_iterator_begin; +}; + +template +using iterator_t = enable_if_t::value, result_of_begin())>>; + +template +using range_value_t = value_type_t>>; + +// The following implementation of is_complete_type is taken from +// https://blogs.msdn.microsoft.com/vcblog/2015/12/02/partial-support-for-expression-sfinae-in-vs-2015-update-1/ +// and is written by Xiang Fan who agreed to using it in this library. template struct is_complete_type : std::false_type {}; @@ -176,48 +343,47 @@ struct is_complete_type : std::false_type {}; template struct is_complete_type : std::true_type {}; -template struct is_compatible_object_type_impl : std::false_type {}; -template +template struct is_compatible_object_type_impl < - CompatibleObjectType, BasicJsonType, + BasicJsonType, CompatibleObjectType, enable_if_t < is_detected::value&& is_detected::value >> { - using object_t = typename BasicJsonType::object_t; // macOS's is_constructible does not play well with nonesuch... static constexpr bool value = - std::is_constructible::value && - std::is_constructible::value; }; template struct is_compatible_object_type - : is_compatible_object_type_impl {}; + : is_compatible_object_type_impl {}; -template struct is_constructible_object_type_impl : std::false_type {}; -template +template struct is_constructible_object_type_impl < - ConstructibleObjectType, BasicJsonType, + BasicJsonType, ConstructibleObjectType, enable_if_t < is_detected::value&& is_detected::value >> { using object_t = typename BasicJsonType::object_t; static constexpr bool value = - (std::is_default_constructible::value && + (is_default_constructible::value && (std::is_move_assignable::value || std::is_copy_assignable::value) && - (std::is_constructible::value && std::is_same < typename object_t::mapped_type, @@ -231,110 +397,98 @@ struct is_constructible_object_type_impl < template struct is_constructible_object_type - : is_constructible_object_type_impl {}; - -template -struct is_compatible_string_type_impl : std::false_type {}; + : is_constructible_object_type_impl {}; template -struct is_compatible_string_type_impl < - BasicJsonType, CompatibleStringType, - enable_if_t::value >> +struct is_compatible_string_type { static constexpr auto value = - std::is_constructible::value; + is_constructible::value; }; template -struct is_compatible_string_type - : is_compatible_string_type_impl {}; - -template -struct is_constructible_string_type_impl : std::false_type {}; - -template -struct is_constructible_string_type_impl < - BasicJsonType, ConstructibleStringType, - enable_if_t::value >> +struct is_constructible_string_type { + // launder type through decltype() to fix compilation failure on ICPC +#ifdef __INTEL_COMPILER + using laundered_type = decltype(std::declval()); +#else + using laundered_type = ConstructibleStringType; +#endif + static constexpr auto value = - std::is_constructible::value; + conjunction < + is_constructible, + is_detected_exact>::value; }; -template -struct is_constructible_string_type - : is_constructible_string_type_impl {}; - -template +template struct is_compatible_array_type_impl : std::false_type {}; -template +template struct is_compatible_array_type_impl < - CompatibleArrayType, BasicJsonType, - enable_if_t < is_detected::value&& + BasicJsonType, CompatibleArrayType, + enable_if_t < is_detected::value&& -// This is needed because json_reverse_iterator has a ::iterator type... -// Therefore it is detected as a CompatibleArrayType. -// The real fix would be to have an Iterable concept. - !is_iterator_traits < - iterator_traits>::value >> + is_iterator_traits>>::value&& +// special case for types like std::filesystem::path whose iterator's value_type are themselves +// c.f. https://github.com/nlohmann/json/pull/3073 + !std::is_same>::value >> { static constexpr bool value = - std::is_constructible::value; + is_constructible>::value; }; template struct is_compatible_array_type - : is_compatible_array_type_impl {}; + : is_compatible_array_type_impl {}; -template +template struct is_constructible_array_type_impl : std::false_type {}; -template +template struct is_constructible_array_type_impl < - ConstructibleArrayType, BasicJsonType, + BasicJsonType, ConstructibleArrayType, enable_if_t::value >> : std::true_type {}; -template +template struct is_constructible_array_type_impl < - ConstructibleArrayType, BasicJsonType, + BasicJsonType, ConstructibleArrayType, enable_if_t < !std::is_same::value&& - std::is_default_constructible::value&& + !is_compatible_string_type::value&& + is_default_constructible::value&& (std::is_move_assignable::value || std::is_copy_assignable::value)&& -is_detected::value&& is_detected::value&& +is_iterator_traits>>::value&& +is_detected::value&& +// special case for types like std::filesystem::path whose iterator's value_type are themselves +// c.f. https://github.com/nlohmann/json/pull/3073 +!std::is_same>::value&& is_complete_type < -detected_t>::value >> +detected_t>::value >> { + using value_type = range_value_t; + static constexpr bool value = - // This is needed because json_reverse_iterator has a ::iterator type, - // furthermore, std::back_insert_iterator (and other iterators) have a - // base class `iterator`... Therefore it is detected as a - // ConstructibleArrayType. The real fix would be to have an Iterable - // concept. - !is_iterator_traits>::value && - - (std::is_same::value || - has_from_json::value || - has_non_default_from_json < - BasicJsonType, typename ConstructibleArrayType::value_type >::value); + std::is_same::value || + has_from_json::value || + has_non_default_from_json < + BasicJsonType, + value_type >::value; }; template struct is_constructible_array_type - : is_constructible_array_type_impl {}; + : is_constructible_array_type_impl {}; template @@ -352,7 +506,7 @@ struct is_compatible_integer_type_impl < using CompatibleLimits = std::numeric_limits; static constexpr auto value = - std::is_constructible::value && CompatibleLimits::is_integer && RealLimits::is_signed == CompatibleLimits::is_signed; @@ -379,17 +533,263 @@ template struct is_compatible_type : is_compatible_type_impl {}; -// https://en.cppreference.com/w/cpp/types/conjunction -template struct conjunction : std::true_type { }; -template struct conjunction : B1 { }; -template -struct conjunction -: std::conditional, B1>::type {}; - template struct is_constructible_tuple : std::false_type {}; template -struct is_constructible_tuple> : conjunction...> {}; +struct is_constructible_tuple> : conjunction...> {}; + +template +struct is_json_iterator_of : std::false_type {}; + +template +struct is_json_iterator_of : std::true_type {}; + +template +struct is_json_iterator_of : std::true_type +{}; + +// checks if a given type T is a template specialization of Primary +template